EVERYTHING UKRAINE GROUP BUILD IS NOW UNDERWAY.
Search the Community
Showing results for tags 'focke'.
1:32 Focke-Wulf Ta 152H-0 Zoukei-mura Catalogue SWS#11 Available from Zoukei-mura for 10,584¥ Kurt Tank’s Focke-Wulf Ta 152 was the ultimate incarnation of his Fw 190 series of thoroughbred fighter aircraft. As Germany’s war situation was worsening, there was a call to introduce a fighter aircraft that could fly at higher altitude in order to intercept enemy aircraft, and the possibility of the B-29 being introduced into the European Theatre of Operations. The Ta 152 was Focke-Wulf’s submission to the RLM when key aircraft manufacturers were approached with the problem of developing a high-altitude interceptor that could tackle the increasing numbers of bomber streams that were pulverising the Reich to rubble. The Ta 152H was based on a lengthened Fw 190D fuselage, although technically different. In order to re-establish the centre of gravity, the nose was also lengthened, producing a startlingly long and sleek fuselage for a fighter of the day. Powered by a Jumo 213E with a good high altitude performance, the ‘H’ series machine had a wingspan of over 48ft. Electrical gear retraction systems were replaced with hydraulic systems, and a heated windshield was introduced, for bad weather operations. Of course, a pressurised cockpit was also a necessity. Weapons were a single MK108 Motorcanone that fired through the spinner, and two MG151/20 cannon in the wingroot. The Ta 152 came way too late to make even the slightest difference in Germany’s war effort, but that shouldn’t detract from the innovation and achievement in the design itself. Very few Ta 152 were built, with the figure standing at around 43 machines of all variants, including prototypes. It’s been a whole FIVE years since Zoukei-mura released their second SWS kit, the Ta 152H-1. With this release, it’s now the turn of the rarer H-0 variant. This is the type which sits in the NASM, and of course is the only machine now left in existence. Of course, there is no excuse to them get this wrong. So, as we have already seen the H-1, what exactly does this kit offer that makes it worth buying? If you don’t have the original release and you like the Ta 152, then nothing is stopping you! However, if you do have the original H-1, then I can tell you that there are significant differences in this kit, and owning the original shouldn’t preclude this from being in your collection. This kit is a mix of original H-1 sprues, newly-tooled H-0 sprues AND re-tooled H-1 sprues! Yes, Zoukei-mura have revisited those areas in their earlier release that some may have thought weak, and perhaps areas they wished to refine themselves anyway. Either way, we’ll now take a look. For a retro look at the original kit, take a look HERE The artwork on this kit does seem quite familiar in style to the original release, and no less attractive, with a single Ta 152 tearing into a stream of Liberator aircraft. Box sides show the completed model, with most text in Japanese. As ZM are now firmly a global brand with their model show presence and US offices selling their kits, some dual language text would be nice for photos etc. Lift that lid and you have SEVEN sprues in light grey styrene, and ONE in clear. You might remember that the early ZM kits, including the Ta 152H-1, were moulded in different colours. This was always something they drew criticism for, with them being likened to Matchbox kits (without the garish colours!). Underneath the plastic lies another sleeve containing the decal sheet, masks, instruction manual and an amendment sheet that is specific to this H-0 release. SPRUE A Notice this is an H-1 sprue, but one that has been reworked and we see it for the first time on this kit. Comparing against my original H-1 kit, the only real refinement I can see here are the main wheel hubs and their brake line. The reworked parts look far better than the originals. If there are no other reworked parts here, then that is just fine as the parts here are already refined, and look far more than they did under the original silver plastic that seemed to make things look soft. Essentially, this sprue concerns itself with the engine and undercarriage. Engine detail is great, and this kit contains a fully featured Jumo 213E that is composed of main left, right engine block, crank case cover, coolant vapour reserve, ignition lead wiring loom and junction box, starter motor, generator, supercharger, oil cooler etc. There are over 20 parts to this and I know from experience of building the original kit for the Concept Note book, just how good the engine looks when painted and weathered. I think the engine firewall could benefit with a little wiring to the engine area, but that’s it. To cap the engine off, literally, a two-part spinner is included. I know the shape of spinners can be contentious, but this looks great to me, and includes a fine ‘panel’ line around the circumference. A forward radiator block and annular radiator parts are included. The latter has fine cooling fin detail on both the interior or exterior faces. Undercarriage struts are superbly detailed, and separate brake lines are included. Oleo scissors are also more than acceptable, and the multipart rear tail strut is no exception. The main part of this anchors high up in the vertical tail fin. SPRUE B Another H-1 sprue, and again re-tooled. Here you will find various engine components such as the supercharger, propeller, guns, fuselage fuel tanks (the H-0 carried wing tanks also), exhausts, and various other engine parts. The propeller is certainly more refined looking than the original, and the exhausts have marginally different detail. One thing I’m disappointed in that ZM didn’t rework are the tires. These would have looked better with a little weighting added. The opportunity was there to sort this, so if you want them to look a little flatter on the bottom, you can always get out a sanding stick. Another inclusion here are the engine bearers. One thing I found with the original release was that fitting the engine and bearers into the fuselage, proved a little problematic. To counter this, I snipped off the lower locating pips and aligned the engine with the upper pins only. The wing root cannon look a little simplistic too, but with some extra work and electrical wiring, they won’t look too bad. If you want to use any aftermarket for these, then look at the MDC resin gun replacements. There has been minimal slide mould use for the barrels on these guns, as also on the MK108 too. SPRUE C With Sprue C, we start to see cockpit parts, starting with the cockpit floor and integral rearmost bulkhead that encapsulates the battery/stowage compartment. Another rear cockpit bulkhead that incorporates the seat location and forward turtle deck is included. ZM’s attention to detail with this release still grabs me in the same way as it did 5 whole years ago, and the levels of detail more than hold up to current eyes, expectations and scrutiny. A new instrument panel, specifically for the H-0, is also included here. The details of the bezels look perhaps a little exaggerated, but they will make for ideal painting and detailing conditions, and a punched decal instrument should sit perfectly inside. A drop of Klear or Micro Crystal Clear will finish these nicely. Decals are provided for the instruments, but I think the definition/detail is poor. My choice, as always, are the excellent Airscale decals. This new part also has rear instrument detail, allowing you to add some wiring. Two seats are supplied. One of these is a standard part that allows you to place your own seatbelt set, and the other has moulded belt detail. I’m absolutely convinced that the moulded belt detail has been improved, and looks akin to the quality I saw on my recent Ho 229 build. Personally, I have no hesitation in using the seats with the moulded belts. They really do look superb! The cockpit contains separate consoles and a throttle lever that connects to a socket on the underlying floor. Rudder pedals are attached to rods that pass under the consoles. Yes, all the detail you want is here, even if you may never see it! You will find other bulkhead details here, and parts for what was the forward weapon bay on the earlier 190 series. Ammunition boxes for the wing root guns are to be found here, as are various oxygen and compressed gas bottles that fit within the tail section. One feature of the Ta 152 series was a nitrous oxide tank that could be used to temporarily boost engine performance. This was located in the rear fuselage. Also here are various other rear fuse internals, such as radio sets. Lastly, a wing spar is included that perfectly pre-aligns the wings for you, and provides some stability to this crucial area. Some wheel bay detail is provided here, and you will also fit the guns into the provisional wing root areas before installing to the fuselage. SPRUE D Here we see a new sprue, designated as H-0, and looking very similar to its counterpart in the previous release. However, things appear to be more refined here. Looking at the surface detail rendering, the new parts have better riveting and panel line detail. Originally, the general rivet lines were exaggerated, but now they appear to be represented far more realistically. Detail on the inside of the parts consists of the same frame lines etc, and remains unchanged. I have no problem with this though. A port is supplied separately on the rear fuse, allowing the modeller to pose this open and display the internals. That refinement of detail extends to the tail where the stabiliser fairing is now fitted with correctly raised line of fasteners, instead of sunken rivet detail. Again, the access panel on the fin is separate, so it may be posed open if you decide to detail the area within a little more. Engine cowl detail is also slightly different around the forward exhaust area, and a new part is included on this sprue, for the upper louvered vent that sits just behind the cowling ring flaps. SPRUE E I can’t see any difference between this sprue and my original H-1 release kit, and indeed it is still designated as H-1 on the ID tab. ZM’s unusual fuselage breakdown means that the lower belly section is separate, and moulded here, complete with internal rib structure detail. The single piece forward upper cowl that incorporates the ex-gun bay and engine cowl, is moulded as a single piece with some internal detail. Unfortunately, ZM didn’t see fit to remove the ejector pin marks from in here, so you will need to eradicate them yourself if you wish to display this part removed. The forward nose cowl is separate to the cowl flaps, and the latter are provided as open and closed options. Tail surfaces have some superb external detail, and control surfaces have a taped effect finish. I’m not absolutely convinced by this, but some photos do seem to look quite similar to the ZM approach, if maybe not quite as raised and obvious. Still, the finish is very attractive. The modular wing approach sees the forward belly section moulded here, as well as the main gear doors and other small parts. Note that there is the H-1 upper louvred panel included here, and this is NOT for use on this kit!! SPRUE F & G These are wing sprues and are essentially mirror equivalents of each other. Now you get an idea of the sheer span of this sleek fighter aircraft. As these are H-0 specific sprues, they are indeed newly-tooled. Due to the difference in airframe wing tank locations, you will see a difference in engraved surface detail that is applicable to this machine only. It is noted that as with the fuselage parts, the riveting on the wings is also more subtle. Only key rivet lines are included too, leaving the way open for you to add the remainder yourself, if this is what appeals. The wheel well bumps are also more organic looking too and far more realistic. Some detail is moulded within the wheel bay roof, and this is more than adequate. Trailing edge flap bay detail is also moulded, but there are ejection pin marks you will need to remove. As with the H-1, the wing leading edges are moulded separately. I’ve heard some say they struggled to make these fit properly, but for me, I had no such issue. Just take your time and be methodical with your approach. Note that the wing roots still remain as single parts on this release. I wasn’t too happy with the protrusion of these from the fuselage when installed, so I thinned the joint face a little on mine before installation. Refinement of detail extends to the gun bay covers for the wing root. Engraving is shallower generally, and these are a big improvement over the earlier release. SPRUE H ZM decided to revisit this sprue and re-tooled it to make it more accurate. As well as a clear instrument panel and a few small parts for wingtip lights and gun sight etc. the main players here are of course the windshield and the familiar blown hood. Noticeably, the windshield looks more refined and the shapes have changed somewhat. Clarity is excellent, and the canopy parts have superb frame definition that will aid accurate placement of the vinyl masks. Plastic Summary I found a new level of plastic moulding quality with the Ho 229, and it continues here. Parts are generally flash free, and seam lines are minimal. There are a couple of sink marks here and there, but nothing too major. You could almost excuse them for metal ‘canning’ from the stressed metal of the real aircraft!! Masks A small sheet of vinyl masks is included for the canopy. My experience of these is that they adhere well, fit perfectly, and adhere well to the plastic. If you ever need to tweak a mask, then the flexibility of the vinyl will allow for that. Decals For me, ZM’s decals are possibly the weakest element of their kits, BUT they do adhere well and conform to surface detail with the help of a little decal setting solution. I don’t know who prints them, but they tend to be a little thicker than I’m used to, but in fairness, they are well printed with good, solid colour and minimal carrier film. Registration is also perfect. As well as markings that are designed to be generic and allow the modeller to make their own decisions, a full set of stencils is also included. I’m not too enamoured with the instrument decals. They lack vibrancy and definition. Swastikas are supplied in two parts, so as not to offend the sensibilities of particular countries that get all offended by them on model kits! Instructions The first thing you’ll notice is that the rather swish looking manual (designed to look like a 1940’s technical document) is actually the same one that was supplied with the H-1 kit back in 2010. However, a supplement is included with the correct H-0 nomenclature, and this includes the amendments and changes to this particular release. The first thing I would do is to mark these changes within the main manual so that you don’t fit the incorrect parts for this version. Illustrations are excellent, with CAD-style detail and shaded drawings. SWS kits have advanced a little since the manual was first printed, and as a result, this one doesn’t have all the fancy technical details of the real aircraft, as was seen in the Ho 229 manual. Still, ZM’s instructions are better than most within the industry. Paint references are Mr Colour and Vallejo. Conclusion I admit that I was a little too hasty to write this release off, due to the relatively small number of external differences between this and the original H-1 release. However, the inclusion of all of those refined and reworked sprues, along with the new-tool parts, serves to make this a worthwhile release. With the original H-1 kit now being currently OOP, the H-0 is the only real game in town for this stunning fighter aircraft, with the exception of the Pacific Coast kit that some claim to be difficult to build or hard to obtain. As far as price too, then this kit is well-pitched, being cheaper in some respects than the PCM kit, and also a more highly detailed kit. If you’ve never had the opportunity to build a ZM Ta 152, then I really, really can recommend it! HIGHLY recommended. Review sample courtesy of my wallet. To buy directly from Volks Japan, click THIS link. To buy directly from Volks USA, click THIS link.
1:32 Focke-Wulf Fw 189A-1 HpH Catalogue # 32030R Available from HpH for €210 If there was one country that didn’t mind defying convention with their aircraft design, it was Germany. Unlike some of the more unusual projects created by the Allied nations, the Germans really didn’t mind pushing the experiment further and as a result, a number of pretty unorthodox airframes entered regular service. One of these was the Focke-Wulf Fw 189, designed by Fw’s chief design engineer, Kurt Tank. This specific machine was the winning design for a requirement to provide the Luftwaffe with a tactical reconnaissance and army cooperation aircraft that was also able to carry a light bomb-load. Another notable machine which the Fw 189 competed against was Blohm und Voss’s unusual and asymmetric Bv 141. The Fw 189 was generally referred to as the Uhu (owl) and the ‘flying eye’, and consisted of a twin boom layout with a heavily glazed fuselage nacelle sitting on the centre wing section. Powered by two Argus As410 engines, the Fw 189 was perhaps a little underpowered, and relatively slow in comparison to fighter aircraft. Despite this, the sheer manoeuvrability of the type, with its incredibly small turning circle, made them relatively hard to shoot down, and the Uhu became a successful aircraft, operating mainly on the Eastern Front, with great effectiveness. A crew of three was carried, and defence was provided by MG15s fixed into two gun cupolas. A further two MG17s were positioned in the wing roots, firing forward. Externally, up to four SC50 bombs could also be carried. Almost 900 Fw 189 were built, with only one surviving today, in a state of severe disrepair (under rebuild at time of writing), and several other nations operated them, including Romania, Slovakia, Hungary and Bulgaria. Norway actually operated the Fw 190, post-war. It’s often been said that large-scale modellers are living in a truly golden age. Who would’ve thought, only a few short years ago, that we would see even one quarter of the amazing and ambitious releases that we are being offered on a regular basis. A number of particular subjects are of course classed as a Holy Grail amongst certain modellers, and the Focke-Wulf Fw 189 is one of them. Great Wall Hobby have given us two wonderful 1:48 kits in injection plastic, and now HpH have stepped up the mark with this new resin-based multimedia kit. As soon as this was announced, I really had to register my interest. The real Fw 189 had a wingspan of 60ft, which means that in 1:32, this model has a span of no less that 570mm. That means this model is no shrinking violet. With that in mind, it might surprise you to find that this kit is packed into a relatively small box, measuring 410mm x 260mm, and with a depth of only 55mm! HpH have decided to use an action artwork on this release, instead of the profile art of previous kits, and I have to say that it’s a smart move. The box itself is quite a rigid type, and inside, it’s compartmented in order to keep parts from sliding around. This also adds further rigidity. If you are ordering this kit from long distance, I have to tell you that HpH pack their products superbly, and this arrived safely, wrapped in corrugated card and bubble-wrap. Open the lid, and sat on top of the mass of bubble-wrap protected packets, sits two zip-lock wallets. One of these contains a set of HGW-made seatbelts, vinyl canopy masks, turned brass parts, single decal sheet and a CD that contains the instructions manual. I quickly printed this in colour, as it’s far friendlier for workbench use. The other zip-lock wallet contains two large brass photo-etch frets and a single colour-printed one, protected by a piece of cardboard. All smaller resin components are bagged into zip-lock wallets that reflect the parts groupings printed in the manual. The larger airframe parts are inserted within the compartments, and bubble-wrapped for protection. Firstly my apologies, as having fumbled through these parts in order to asses and understand them, I seem to have possibly put some of them back into wrong bags prior to taking photographs. I’m sure you’ll still understand what I write though. Parts Bag A I quite like HpH’s solution of casting their parts on ultra-thin wafers. Some decry this, saying it makes it difficult to remove, but I prefer it to casting blocks. This bag contains TWELVE wafer casts and one part on a casting block. Four of these wafers are duplicated once, for those many multiple parts that are required, such as internal undercarriage bay structures, multi-part engine cylinders, rudder counterbalances, internal canopy framing, gear bay wing spar sections, engine bulkheads etc. Generally, parts are grouped onto wafers which are specific for certain areas of construction. Where they aren’t, this can still be pretty easy to locate what you need. There are so many parts here that it wouldn’t be feasible to list them all. Other wafers include cockpit floors and sidewalls, instrument panel, gun cupola rings, and also rods that runs along the leading edge of the landing flaps. The single cast piece in this pack is the rear fuselage deck. If you’ve never seen an HpH kit before, then you’re in for a treat. All detail is excellent, with the minutest trace being there to see. Casting is sharp and among some of the best I’ve seen. Without a doubt, this must go to create one of the best cockpits I’ve ever seen. Take a look at the images for yourself. HpH isn’t relying on resin alone for some of the key parts, like the multipart cockpit floor. These are supplemented by photo-etch parts such as tread-plates. This will look incredible when assembled and painted, and with that large greenhouse glazed area, it really has to be very good indeed. Parts Bag B Another nine wafers are packed into here, but not as large as those in the first bag. Predominantly, this package contains cockpit parts, such as padded cushions, seat buckets, control column, rudder pedal assemblies, armour plate framing, ammunition saddles, compressed gas cylinders, canteens, camera mount, equipment bags etc. The camera itself is to be found in the previous bag of parts. The design of this kit has the camera pointing down through a hole in the fuselage floor, yet the centre underside wing panel has the aperture cast as closed. There is some PE to use as what appears to be a door here, so I assume you can drill out that section and pose the model with the camera door in an open position. Non-cockpit parts include the undercarriage, main gear wheel hubs, and underwing ETC bomb racks. Parts Bag C There are a small number of wafers here. One of these holds the two engine crankcase blocks onto which the cylinders fit. Full engines aren’t supplied for this model, but no doubt that it could be achieved with a little ingenuity. An option to provide for this would have been a nice tough. tail wheel leg with wire reinforcement Immediately recognisable are the amazing looking engine cowls, cast as single pieces into which the engine cylinder assemblies will slide. You can appreciate here the rather beautiful lines of the Argus As 410 engine cowls. Very impressive. External detail is itself worth noting. Panel lines are fine and even. A fine wall of resin needs to be removed from the rear circumference of each cowl, and this is designed to be easy to do. Each of the four 50kg bombs are also cast as single pieces, complete with stabilising fins, and the non-glazed upper fuselage section is also a single piece, connected to its block by another thin resin wall. HpH have cast the spinners as a single part, minus the attractive fins which will be added as photo-etch parts. Propeller blades are cast onto a wafer, and jointed down one of their edges. Care should be taken in removing them for use. All wheels are cast as single parts, and the main gear doors are to be found, two per block, with excellent detail both outside and within. The single piece main gear struts are a beautiful piece of casting, and are made rigid by the insertion of a steel rod. Some clean-up will be required of course, but certainly nothing more than you would expect. Parts Bag 4 If the thought of lots of clear resin parts was to make you wonder about their quality, then fear not. These are probably the best I have ever seen, including those seen in their other kits (and I thought THOSE were good too!). There are fourteen parts here, and the most obvious, the nose, is certainly attention-grabbing. This single piece unit, like the other parts, is crystal clear, with beautiful external framing detail. Like the other parts, it is connected to its casting block by a thin resin wall which will be easy to saw through. I’m still drooling at the nose, but onwards! Framing detail and clarity are standard across the whole of this bag. For the rear gun ring, HpH has cast this in two parts, allowing the modeller to choose the final position of being either opened or closed. Of course, the parts can also be placed in any position on that ring, as it of course swivelled in actual use. You really will need to make an outstanding job of that cockpit, as you’ll see little bit of detail though this canopy. The crew access doors can be positioned in either an open of closed position too. My only reservation here is that all these fragile parts are in the same bag. It would’ve been better to use a few smaller bags in order to prevent scratching. A few clear and coloured resin pieces are included for wingtip lights, plus a few smaller parts for underwing light etc. Parts Bag 5 A lot of key parts here, with the central under-wing/fuselage panel, rudders, stabiliser, elevator and ailerons being found here. Again, external detail is amazing, and as good as any you will find on a top-quality injection moulded kit. Detail consists of fine panel lines and port access plates, as well as restrained riveting. Fabric and rib detail on the ailerons and rudder are subtle enough and will need no further work, and the stabiliser is a two-piece item, being cast as upper and lower panels. You will need to remove the resin webbing from the tail gear well area. Well detail is cast on the upper inside of the stabiliser, and this is enhanced further with photo-etch inner rib detail. Wings Whilst the wing upper and lower panels seem conventional, they aren’t. Upper wing panels also contain a portion of the fuselage nacelle sidewalls. Cast into them is also the tail boom fairing and forward engine cowl. The lower wing panels are shorter, stopping at the tail boom junction. Ailerons and landing flap areas are separate items. I find the surface detail absolutely gorgeous. Look at the photos and see how precise and even the panel lines are, and the other engraved detail. The full airframe is also riveted, and it looks impressive. A lower landing light is provided as a separate inner reflector and external lens, with a PE plate. PE is also used for the aileron actuator and hinge covers. Detail is comprehensive. Of course, there are casting blocks to remove, and these lie along the wing leading edge with the upper panels. These are connected so as to cause minimal disruption to external detail, whilst not affecting the lines of the forward-most leading edge lines. Lower panels have the blocks connected along the rear edge, where the ailerons etc. will fit. Three inner wing spars are also included here, cast onto a wafer. The main spar is reinforced with steel rods. The instructions clearly show their positions, plus there are channels and ribbing within the wings which provide a position location for these parts. Tail Booms Construction is conventional here, with each boom consisting of port and starboard halves. Notice that they insert within the gap left by the lower wing panels, and include the wing cross section at that point, meaning they should be easy to align. Rudders are separate, and we saw those earlier. External detail matches the other parts beautifully, with some very neat rows of rivets. You will need to replace any of these that could become lost when removing seams. External detail is supplemented by photo etch detail, such as the strakes that run along the spine and belly of each tail boom, and the strap that covers the bolts which hold the tail fins to the booms. Like a number of parts in this kit, there are positions within the parts that are designed to accept resin locating pins that will help with alignment. HpH’s attention to detail extends into the main gear wells, where you’ll see some very nice rib and stringer detail. Along with the other components, just a little wiring is all that will be needed to create an amazingly detailed area. Resin summary All parts are cast in a light grey resin, unlike some of the releases I’ve seen where this has a pale green/yellowish hue. Surface finish is superb, looking very akin to an injection kit. External surfaces are polished. This kit appears to have no defects anywhere, or any breakages. Quite simply, an ultra-high quality resin product. Clean up and block removal should also prove to be very simple, in comparison to other resin releases I’ve seen over the years. Turned brass parts MG15 gun barrels are provided here, and look like MASTER parts. If you’ve seen these before, you’ll know just how realistic they are. A small PE fret also provides parts for the reticules. The remaining parts are for the pitot, and two sets of slide-fit tubes for the prop shafts, allowing the finished item to rotate. Photo-etch parts A single colour-printed fret contains the instrument panel and the fascias for other instrumentation units within the cockpit, including various levers etc. A number of non-colour parts are also included for general cockpit use, such as the rudder pedals and observer’s feet racks that sit within the glazed nose. The largest brass fret contains parts solely for the landing flaps. All photo-etch in this kit is produced by Eduard, and these flaps follow their typical design whereby you fold and twist the small ribs within the flaps, to 90 degrees. The skeletal framework is fitted to a separate outer skin, and you will need to add the leading edge tubes to complete them, as well as various other small parts. I did say this fret was solely for flaps, but I can also see the tail-boom spine and belly strakes here too. Lastly, a slightly small fret contains parts which are general to the model. These include the anti-glare panel from the cockpit, ammunition saddle parts, alternative PE bomb fins (requiring removal of resin cast parts), plus various straps, plates and other minor detail. Production standard is as high as is to be expected from Eduard, with everything clearly numbered. Masks With a canopy with so many panels, you’d be correct in assuming that this would be a killer to mask. Thankfully, a beautifully cut set of vinyl masks is included. Mask material exhibits no shrinkage, and appear to be high quality. Either way, you’ll be thankful that HpH included these! Decals HpH’s decal inclusion has undergone its own revolution. In previous releases, standard decal sets have been included, but recently, a fellow Czech company, HGW, have been using a new technology called Wet Transfer. These started with stencil sets, and progressed to actual markings. The beauty with these, as opposed to regular decals, is that they contain ZERO carrier film! Each decal is soaked in water, and then applied to the model. After a few hours, the carrier film is peeled off, leaving just the ink on the surface. HPH have decided to include a custom set of these in this kit, including both national, individual, and stencil decals. Printing quality is high, and in perfect register. Check out those stencils, and they are readable too! Three schemes are available in this release, and these are: Fw 189A-1, 1.(H)32, Pontsalenjoki airfield, Finland, 1943 Fw 189A-1, 1.(H)32, Finland, 1942 – 1943 Fw 189A-1, 1.(H)32, Finland, 1943 Seatbelts HGW’s second collaboration with our kit manufacturer is for the inclusion of some seatbelts, specifically designed for the Fw 189. These are made from a combination of printed and laser-cut textile parts, and a small number of buckles and clasps that are included on the colour PE fret. These belts are simply the best available, and can be posed in a natural way by scrunching the material before assembly. They can also be weathered with oils. Instructions A CD is provided which contains all the high-resolution colour JPG pages that you will need. Ideally, you should print a copy of these and work from that. I hate staring at computer screens whilst I work. Also, as I use a Macbook Pro, I didn’t have a CD drive, and needed to dump the files to a pen drive whilst at work. The instruction files are very high resolution, and start with showing the contents of the parts bags, all numbered. Clarity is very good. Instructions are then shown for assembling the seatbelts, and then construction begins with the wing and spar assembly. These first steps are critical and need to be followed closely. Assembly drawings are in line drawing format and look easy to understand. These are punctuated with colour photos of the test assembly. Colours are indicated, but in simple terms, and not in manufacturer codes. Instructions to add the decals are also given, and of course, each scheme is illustrated in various profile format. In all, a very clear and concise publication that you should have any trouble with. Chocolate What chocolate? Looks like HpH decided to discontinue that little treat. It’s a shame as it softened the way with my wife when I introduced yet another kit to her! Conclusion For me, this is HpH’s best release yet. I know the subject is one that really appeals to me anyway, but I do own a few other earlier kits, such as the Walrus, He 111, Me 410 and Sea Hornet. Those are all masterpieces, but I think this piques even those kits. Yes, this one is slightly more expensive than was originally projected, but the increase in PE accounted for that. This is also no beginner’s kit. In fact, unless you’re well-versed with resin, I would think twice about it due to the unusual layout and the critical factor in getting everything to align properly. As a kit, it’s simply outstanding; highly detailed, and a superb piece of model engineering and casting, along with those seatbelts, photo-etch and turned brass parts. I really couldn’t resist this one, and the main exterior parts indicate this was #03 from the moulds! If this at all appeals to you, treat yourself, and tell them you saw it at Large Scale Modeller. VERY highly recommended My sincere thanks to HpH Models for this review sample. To purchase directly, click THIS link. James H