EVERYTHING UKRAINE GROUP BUILD IS NOW UNDERWAY.
Search the Community
Showing results for tags 'iar80'.
1/32 IAR-80A Azur-Frrom Catalogue # AZUFR8002 Available from Special Hobby for 1300 Kč (approx. £45 in UK) The IAR 80 was a Romanian World War II low-wing monoplane, all-metal monocoque fighter and ground-attack aircraft. When it first flew, in 1939, it was comparable to contemporary designs being deployed by the air-forces of the most advanced military powers. Production problems and lack of available armament delayed entry of the IAR 80 into service until 1941. It remained in frontline use until May 1945. In 1930, the Romanian government issued specifications for a new fighter. Although the government was not anticipating bids from its own aircraft industry, IAR produced several prototypes in response to the tender. A second contest was also fought between the newer IAR 14 and PZL P.24 designs, and once again the PZL design won a contract for another 50 aircraft. Although IAR's own designs had not entered production, they nevertheless won the contracts to build PZLs and Gnome-Rhone 14K engines under license. As a result of these and other license contracts the company had enough money to fund a design shop even, if its designs never saw production. Despite losing to PZL, an IAR design team led by Dr. Ion Grosu continued work on fighter designs. He was convinced that the low-wing design of the IAR 24 represented a better design than the PZL gull-wing design. Once again, the team studied the new PZL fighter looking to incorporate its best features into a new aircraft, and the result was the IAR 80. By April 1941 the Romanians were firmly in the German sphere, and as a result the Germans released more FN guns for their use. These were quickly installed, and the resulting 80A model finally mounted the original complement of six guns. Armoured glass in the windscreen, seat-back armour, and a new gun sight were also added at the same time, along with the newer 1,025 hp (764 kW) K14-1000A engine. The extra engine power proved to be more than the fuselage structure was designed to handle, and it had to be reinforced with a duralumin "belt" just behind the cockpit (in the first 95 A series aircraft built before the fuselage could be modified). Although the IAR 80A had a more powerful engine, the added weight of the guns, ammunition and armour plating reduced the top speed slightly to 316 mph (509 km/h). Nevertheless, the new model was clearly an advancement, and the A model replaced the earlier one on the assembly line starting with the 51st airframe. Eight of these had been completed in time for the invasion of the Soviet Union on 22 June 1941. FN guns remained in short supply, so throughout late 1941 and early 1942, guns were stripped from PZLs and observation aircraft for use in the IARs. Edit courtesy of Wikipedia The kit We’ve not exactly been endowed with 1/32 kits of this extraordinary-looking fighter aircraft, which is a real shame. When it comes to WW2 protagonists, I suppose we rarely look at participants in the south-east of Europe. Thankfully, with the foresight of Azur-Frrom, and with help from Special Hobby, the stunning IAR-80A is now with us in a real scale! Of course, this isn’t the first of the line from these companies, with two previous incarnations available from them as the IAR-81C, dating back to 2014. This isn’t a simple incarnation of the IAR-81C though. The fuselage and wings are indeed different. Inside the box, this kit is comprised of six sprues of light grey styrene and a single clear sprue. A packet of small clear parts, another of resin parts, plus a wallet with decals and PE, conclude the contents. Oh yes, an instruction manual too! The clear parts in this release are thankfully packed into a separate zip-lock wallet to protect them. The box for this is very attractive too, depicting an IAR-80A from Escadrila 47 Vanatoare, Grupul 9, after a successful combat against a Russian Yak. That’s also a very tight lid to lift from the box…cue package of parts on the floor when it finally comes apart! Sprue A This sprue is very similar to the previous IAR-81C releases, but not identical. I did believe that there were changes in the length of the fuselage on the IAR-81C, but this new kit has the fuselages at exactly the same length. However, there are detail changes around the cockpit opening, in the area to the rear of the opening. I also note that the wing on this seems to be in a very slightly different position to the previous release. Externally, detail is nice and refined, with subtle and even panel lines, with rivets only seen along those panel lines, and not in between. The stiffening strip which runs from the cockpit to the tailplane is also nicely defined, and with rivet detail. Louvre detail just in front of the cowl position, is also very nice, but open. Internally, cockpit wall detail is excellent and very sharp, with nicely defined stringers and former detail. Please note that as is typical of low-pressure injected kits as this, that there are no locating pins to help you align the parts, so care will be needed (i.e. tape one side and glue from the opposing side!). The rudder is separately moulded, and the stabilisers will fit via the traditional tab and slot method. Also on here are the parts for the engine cowl. This is moulded as port/starboard halves, plus the nose cowl ring. There is a very slight short shot to one of the flaps on the rear of a cowl half, but this will be covered by the PE parts that are supplied and help to improve this area. The propeller blades are also moulded separately here, as is the bulbous spinner. Sprue B Again, at first glance, this looks identical to the previous IAR-81C, but it isn’t. The span of this machine was shorter, and this can be seen in the wingtips on this kit. Everything else looks the same except for the fact that the centreline on this lower wing has no provision for the bomb rack that fits to the previous releases. That lower wing is a full-span part with some exquisite panel line and access port detail. As with the fuselage, rivets are only to be found alongside those panel lines and ports. For me, I will most certainly want to enliven the surface by adding extra rivet lines. The main gears wells are just that…..wells, and they are moulded into the lower wing. As is traditional, the upper wing panels are individual pieces, and exhibit some of the very finest in engraved detail that I have ever seen, and I really do mean that. I just hope they take a wash after paint! The wings are moulded without ailerons and landing flaps, and the remaining parts on this sprue cater to the latter and are moulded as upper and lower halves. The frame and fabric depiction is very nice too. As with the fuselage, there are no locating pins on any parts here. Sprue C This sprue is identical to that of the previous release, and contains the ailerons, stabilisers, elevators and rudder. All are traditional construction, i.e. halves, and moulding is very nice indeed with the same attractive fabric and frame rendition on the control surfaces as I noted on the landing flaps. There are a few ejector pin towers on the reverse side, and you’ll need to snip them off before construction. Sprue D Now, unlike the main airframe components with low pressure injection, these are very different in appearance insomuch as the parts are glossy and extremely sharp with no real flash. I came across this sort of thing on the Special Hobby Tempest kits. The reason for the different moulding technique is due to the nature of the parts with them being intricate and relatively small. A good number of the key cockpit parts are found here, such as the upper tub frame, footboards, multi-part instrument panel, seat sides, optional control sticks with both regular stick grip and spade types, forward instrument panel mounting frame and rear frame etc. Also to be found here are the parts for the engine exhaust, control surface horns, and individual engine pushrods...yup, you’re gonna have to apply them one by one, all TWENTY-EIGHT of them! That’s a little different from the regular approach of attaching them to a central hub. Sprue E The clear parts. Special Hobby have packed these into two little wallets, with the canopy parts in one wallet, and the gunsight lense and wingtip lights in another. Clarity is very good, with no visible distortion. Sprue F Another high-pressure moulded sprue here, with many main parts for the IAR K14-1000A engine. The front and rear radial banks are moulded as halves, and the details are excellent with fine cooling fin reproduction and cylinder head details. You will also find the hub here, plus the main exhaust hub section. It’s such as shame that the beautiful hub and its detail will be totally hidden by the shroud which sits behind the spinner, totally obscuring the aforementioned detail. Talking of spinners, the rear plate is moulded on this sprue. The main gear struts are found here, as are the wheels. There is no weighted effect to the latter, so you’ll need to sort that yourself or purchase the resin wheels from CMK. Hub details on these are very nice, but as they are integral to the wheels, you’ll need to mask them for airbrushing. No masks are included with this release. A couple of inner gear doors are moulded here but not for use, and you will also find a few remaining cockpit parts such as sidewall detail and the main seat part. Of note are a couple of parts here at the edge of the sprue, near the engines. The sprue here is cut-out and the delicate parts in that area have suffered some breakage and will need repair or re-fabrication. These parts concern the instrument panel mounting. Sprue G Here we have our last sprue, and this contains, amongst other things, a longer spinner version that that found on Sprue A. The instructions do state that either can be used, but you might want to look at reference photos of your specific machine before committing to either one. Other parts include replacement inner gear bay doors, alternative instrument panel section, under-cowl scoop, and two headrest parts as an alternative to the part on Sprue F. Resin parts Four casting blocks are supplied here, cast from medium-grey resin. Two of these hold the parts for the exhaust manifolds with nicely hollowed out ends, the engine intake and filter, and the last block holds a series of smaller parts. These are for the gunsight (two included), and the gun barrel stubs/muzzles. Casting is excellent, as you would expect from Special Hobby/CMK. Photo Etch This small fret contains the engine cowl louvres, multi-part pilot harness, interior canopy handle and elevator trim tab actuators. Again, production is excellent, and the belt details will look good under a coat of paint. Decals A single sheet, printed by Aviprint, contains decals for all national markings, serials, insignia, stencils and instrument panel gauges etc. Printing quality is very good, with solid and authentic colour, minimal carrier film and perfect register. The decals also look nice and thin too. There should be no error with these whatsoever as Radu Brinzan was involved with their design. I can certainly rest easy with that as Radu is the go-to guy when it comes to this machine. The four schemes supplied are: IAR-80A – “Anghel”, Escadrila 47 Vanatoare, Grupul 9, Pipera, August 1942 IAR-80A – Escadrila 53 Vanatoare, Mamaïa, July 1942 IAR-80A – “Felicia”, Escadrila 47 Vanatoare, Grupul 9, Pipera, Summer 1942 IAR-80A – “Mamy”, Escadrila 47 Vanatoare, Grupul 9, Pipera, Summer 1942 Instructions I quite like Special Hobby’s instructions format. They are clear, concise and the illustrations are easy to follow. This manual starts with a history of the type, followed by a parts map, indicating those components that aren’t to be used. Constructions is broken down into 24 stages, with clear drawings guiding the way, and the use of colour illustration to highlight painting and parts placement. The last pages of the manual contain the scheme illustrations, with good, clear scheme depiction and decal location shown. Conclusion After the IAR-81C, I was thrilled to see the earlier pure fighter version of this kit being released. It has a swarthy appearance and was, by all accounts, on par with the Fw 190A/F series in terms of performance. This is a superbly detailed kit, but perhaps one that needs just a little more attention and skill than your standard off the shelf kit, due to the main airframe components and the alignment and clean-up required. In all though, this is a superb kit of an important and oft-forgotten fighter type, and Frrom-Azue/Special Hobby (with Radu) have given it the attention it truly deserves. For the price, with both PE and resin, this is a very attractive package. All they need to do is fix the break in the sprue on F, that causes those two parts to fracture. Highly recommended. My sincere thanks to Special Hobby for sending out this review sample to us. To purchase directly, click THIS link.
1/32 I.A.R.80 decals RB Productions Catalogue # RB-D32021 Available from RB Productions for €14,75 Romania’s I.A.R.80/81 was certainly as advanced, if not more so, than many contemporary fighter aircraft of that period, yet it is one which I imagine is far less known than those operated by other belligerent countries during that conflict. If anyone is best-placed to research and design a set of decals for the I.A.R.80, it’s Radu Brinzan. Having already written two books on this subject (which are superb, indidentally!), Radu is incredibly knowledgeable about this specific type, and being Romanian himself, it’s most certainly a passion. RB Productions have released decals for the I.A.R.80/81 before, with sets being available for the I.A.R.80-M (modified 80/s1 series machine) in all main scales, but this one concentrates specifically on the I.A.R.80, and what appears to be the earlier machines. Whilst the forthcoming I.A.R.80A to be released by FRROM would be the ideal candidate for the 1/32 version of these decals, you source the initial Azur/FRROM release. To utilise these on the I.A.R.80A though, you would need to make a small modification to that kit. As the I.A.R.80A was fitted with 6 guns, you would need to delete the outboard gun and associated access panels on each wing. NOW you can use this set safely! RB Productions new decal set (available in 1/32, 1/48 and 1/72), comes in a re-sealable clear sleeve, with an attractive, folded A4 sheet with the EIGHT schemes printed in full colour. Print quality is superb, and very sharp, depicting five fuselage profiles on the front, and a further three within. Each of these is provided with a small paragraph of specific information next to the image. Each profile is also annotated with key colour details, as well as the main colours themselves being given in Lifecolor and FS codes. To use other makes, you’ll need to cross-reference. Inside the sheet, a further opposite side profile is given for the standard camouflage application, with notes on stencilling and weathering. Four images are supplied of the upper and lower wings, and you will need (quite easily) to tie the correct one to the specific scheme profile you will choose. Dimensional information is included for wing stripes. The back page shows the camouflage scheme in planform, with the wraparound fuselage paintwork. A single decal sheet is included, printed by Fantasy Printshop in the UK. My experience of their decals is that they are as good as the main contemporary manufacturers, and every bit as good as Eduard’s own in-house production, which incidentally, I very much like. I’ve found they also work well with decal setting solutions, where required. Printing is also flawless, with the decals being nice and thin, and having minimal carrier film. Colour reproduction is excellent and everything is in perfect register. One thing I do know is that Fantasy Printshop are sticklers for quality! As well as the various national marking styles that were applied to these machines, a seriesof stencils is also included. In fact, two sets are included, meaning it’s perfectly possible to build at least two models from this sheet (more, if you don’t count the stencils!). The supplied marking options are: I.A.R.80, No.2 of Escadrila de Experienţe, August 1940, Pipera I.A.R.80, No.3, Şc.Vt/Flt.3Vt., Galaţi, October 1943, flown by Elev Av. Ciobănaş Andrei I.A.R.80, No.9 of Gr.8Vt/Flt.2Vt., flown by Adj.Stg.Av. Vasile Niţă, March 1941, Tirgşor I.A.R.81-C, No.17 of Esc.41Vt./Gr.8Vt, flown by Adj.Stag.Av. Florian Budu, July 1941, Bârlad I.A.R.80, No.22 of Esc.42/52 Vt., Gr.1 Vt, flown by Adj.Stag.Av. Gheorghe Firimide, July 1941, Bârlad I.A.R.80, No.26, March 1941, I.A.R. Braşov I.A.R.80, No.42 of Esc.42/52 Vt., August 1941, Sturzeni and Sărata/Salz I.A.R.80, No 44 of Flt.2Vt./Gr.8Vt., March 1941, Tirgşor Conclusion Radu has chosen some beautifully varied machines here in terms of styles of Romanian markings used, and in colourful terms also. Certainly a very welcome accompaniment to the Azur/FRROM kit. A very well researched product that is printed in superb quality by Fantasy Printshop. There really is nothing NOT to like here! Highly recommended My sincere thanks to RB Productions for the review set seen here. To purchase directly in 1/32, click HERE.