Jump to content
The Great LSM Twins Group Build ends July 3, 2024 ×

1:32 P-400 Airacobra


Recommended Posts

Thanks, Jon.

 

New in progress.

 

9737249132_52815fe1bb_o.jpg
Applied stencil decals with Mr. Mark Softer.  Then airbrushed clear paint on them to protect these decals after they were dry.  These stencil decals from kit were thin and looked nice.

 

9734015383_0b1266b42f_o.jpg
I used gray oil paint to wash fuselage. 

 

9734015311_186e55a679_o.jpg
Washed bottom of fuselage, also made some oil stains.

 

9734015573_2a46826788_o.jpg
Painted sliver in some selected spots for chip effect.  Then I used different colors of soft pastel to make shades and adjust the tones on fuselage.  At last, airbrushed flat clear to protect the surface and consist with the same gloss.

 

9734015145_4c49dc226f_o.jpg
Made some chip effects on bottom too.

  • Like 1
Link to comment
Share on other sites

Brilliant work, love the crisp, demarcations between the camo colors and especially the markings.  I am amazed by the small "Whistling Britches" masks you made, I imagine cutting them out without damaging them was challenging.  I do have a question for you...

 

Have you ever encountered any troubles with those vinyl masks?  I have used them a few times, and no matter what I do I get a very small amount of residue from the adhesives onto the surface of the model.  I have repeatedly stuck the masks to my skin to remove almost all of the adhesive, so that they barely stick to the surface.  After painting, I gently wash the surface to try and remove the residue but no matter what I try, when I spray clear coats after painting you can see exactly where the outline of the mask was.  It appears as a "ghost" square around the area.  Never had this happen with Tamiya tape masks.  Have you ever encountered this phenomenon?

Link to comment
Share on other sites

Thanks, Daywalker.  It really was challenging to cut the “Whistling Britches” masks.  I did it twice.  At last, I found using scissors is more easier.  Ha…ha…

I remember that I encountered same situation as you mentioned.  This mask was easy to leave some residues or traces on gloss surface.  I did same thing as you, used the tape to remove remaining adhesives repeatedly, again and again.  After painting the fuselage, I used oil paint and Zippo lighter fluid to wash the fuselage.  I think that some of remaining residues had been removed during this step.  At the end, I airbrushed flat clear coat on fuselage to consist with the same gloss and protect the surface.  This step also covered some residues.  If any residues still remained, I would do some weathering to “cover” them.  That is how I do with this situation.  Just for your reference.

 

  • Like 1
Link to comment
Share on other sites

That is how I do with this situation.  Just for your reference.

 

 

Thank you for the detailed explanation, sounds quite possible that the wash step did help eliminate that residue.  I will try your suggestion, thank you for taking the time to write it down!  It's also good to know that it is not just me who experiences this phenomenon.

Link to comment
Share on other sites

Thank you for the detailed explanation, sounds quite possible that the wash step did help eliminate that residue.  I will try your suggestion, thank you for taking the time to write it down!  It's also good to know that it is not just me who experiences this phenomenon.

 

No problem.  In my opinion, Tamiya masking tape is best choice for masking models.

  • Like 2
Link to comment
Share on other sites

New in progress.  Thanks for watching.

 

9842361603_70d9f9ef67_o.jpg
Made the second stage chip effect.

 

9842361013_7ccbcec9f4_o.jpg
Finial result of fuselage.

 

9842274495_dd0f0e884e_o.jpg

 

9860981476_5330f4b648_o.jpg
Added some stains on radiator air outlets by soft pastel.

 

9842272675_f0cc9dc266_o.jpg
Began to paint small parts.  Airbrushed camouflage on doors.

 

9842292096_72684ba92b_o.jpg
After washed the doors, did the weathering and made some chip effects.

 

9842289896_63bd2bb6d2_o.jpg
Painted the propeller.

 

9842357603_7897781dca_o.jpg
Applied the stencil decals on blades.  Used soft pastel to make some smudges.

 

9842271375_bc32b814d6_o.jpg
Airbrushed these landing gears.

 

9842271645_5d00aebe94_o.jpg
Painted the details and break lines first.  Then washed the gears and made some chips on gears as well.

 

9842354843_c4f82ce725_o.jpg
Painted the wheels and wheel doors.

 

9842356803_beb2eb692e_o.jpg
Used same method to do the weathering for them.

 

9842243884_1bc306518d_o.jpg
I airbrushed Mr. Metal Color 218 alminume on exhausts first.  Then airbrushed a very thin brown again.

 

9842285136_2fdf0a5a69_o.jpg
Washed exhausts by oil paint, then I used soft pastel to make some rust.

 

9842286196_c9252f0ce5_o.jpg
Painted the MGs and washed by oil paint.

 

9842283846_5075c014fb_o.jpg
Painted the basic colors for bomb and drop tank.

 

9842352363_4884d55ccc_o.jpg
Washed by gray oil paint, also used various colors of soft pastel to make the weathering for bomb and drop tank.

 

9842265105_12d5bc1d1b_o.jpg
Put left door and exhausts on fuselage.  Made the exhaust stains with soft pastel.

 

9842350913_469173a6db_o.jpg
Another side.

 

9842240664_61bfb15065_o.jpg
Airbrushed sliver on these areas of navigation light first, then airbrushed various clear color paints on them.

  • Like 5
Link to comment
Share on other sites

Thank you, Rick.

 

New in progress.  Finally finished this P-400, but I still need to build a bomb loader for displaying the bomb and drop tank.  I will share more photos when I am done with everything.  Thank you guys.  I really appreciate your comments and encouragements all the way.

 

9919635866_341d9bf0e9_o.jpg
Glued landing gears and wheel doors on fuselage.

 

9920292525_9ce52cfe0a_o.jpg
I used fishing line for the antenna wires and 0.4mm brass pipe for the insulators.

 

9919779543_4e5b90f3ea_o.jpg
Last two parts, glued the propeller and right door on fuselage.

 

9919780203_b8c6fa483a_o.jpg
Ya~~this P-400 was done.

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...