Jump to content
The Great LSM Twins Group Build ends July 3, 2024 ×

Silver Wings 1/32 Fokker D.21


Recommended Posts

  • Administrators

Hi all,

 

With the review done, it's time to build!

I started with figuring ut what resin tubing goes where in the fuselage framing. 

So far so good! Test fitted the frame in the fuselage and all fits great. Still way more tubes to add.

 

14879C30-847F-4B4D-BDE6-1E2ADF7C8DED_zps

  • Like 3
Link to comment
Share on other sites

Needles to say...I'll follow this.

 

I have a question about the interior...the radio to be precise.

 

Only a few  of them were radio equiped. (212, 219 and 221?)

Also...not seen a wire from the antenna to the tail. The 237 and 241 (with orange triangles) in flight photo for instance

Were these antennas installed later? (with plans to add radios to all planes?) I've also seen a photo from a line of planes (212, 213, 214 and 215...with roundels) none of them had an antenna.

 

All knowledge is welcome :)

Link to comment
Share on other sites

  • Administrators

Needles to say...I'll follow this.

 

I have a question about the interior...the radio to be precise.

 

Only a few  of them were radio equiped. (212, 219 and 221?)

Also...not seen a wire from the antenna to the tail. The 237 and 241 (with orange triangles) in flight photo for instance

Were these antennas installed later? (with plans to add radios to all planes?) I've also seen a photo from a line of planes (212, 213, 214 and 215...with roundels) none of them had an antenna.

 

All knowledge is welcome :)

 

I'm investigating the radio set as we 'speak' and will let you know as soon as i do.

 

Almost finished the tubular frame.

Link to comment
Share on other sites

  • Administrators

Small progress. 

Fitted some PE to the floor boards. Installed control stick (consists of 3 parts) and added rudder pedals. I'll add the straps later and will make them of masking tape, instead of the supplied PE. I made the rudder control rods from brass, since... just because. The seemingly large glue blobs that connect the rods to the pedals are now gone.

 

A2C4345A-552F-4633-8044-CA02448D7564_zps

 

08895F3B-F5CE-4966-9F03-A4A85913C928_zps

  • Like 2
Link to comment
Share on other sites

  • Administrators

The pit in the D21 is tricky. Not soo much the assembly, but trying to understand what is what and lines up how. 

 

The basic frame is done, so it's time to add details. Throttle, oxygen bottle, fire extinguisher, etc..

 

72DFBA66-C389-452E-BEA2-617766F362F1_zps

 

6A6AA1C6-75B2-44A2-9ED4-DEA2893FA3BE_zps

 

The instrument panel consists of 5 separate pieces. I'm fashioning a frame that fits to the back and holds all these pieces together, in the right angle.

 

D6B11A59-427B-40D1-AC8E-ABB06BDAA28F_zps

 

Here are some shots of the 'real' thing. Well... repro thing...

 

1_105_0582_zpshd9hi0dt.jpg

 

1_105_0584_zpscsnex9t8.jpg

 

1_105_0577_zps5pu7sza9.jpg

 

1_106_0622_zps038qlxkc.jpg

 

fok2_zpskhocyqls.jpg

  • Like 4
Link to comment
Share on other sites

  • Administrators

Progress!

I finished the fuselage frame by adding the headrest tubing.

Check the reference above. The two tubes that run from the top of the headrest to the rear are depicted awkward in the instructions. They should meet at the top.

This way the 'shelf' that houses the base of the antenna can be glued to all four tubes.

 

DD54F96B-C02D-481A-A484-C9CB6A1F00FA_zps

 

B5E21B55-7953-4D42-BC9C-DB5E348DD9A2_zps

 

Then I sprayed the whole thing dark black/brown. This functions as a base of the chipping effect in the light grey paint.

 

3D33720D-2D7B-4753-B446-8350596E03CC_zps

 

And here's the light grey paint. (i used RLM 76)

 

A00C86F0-5D81-4A17-8B8B-3833653DC6B4_zps

 

4B96F68B-403C-43A5-91AA-2CCF5639478A_zps

 

And here's the chipping:

 

17C053B1-C3F1-4329-A36E-3552CD60C74E_zps

 

EB3D0DB8-69A6-4B58-9954-C780B50AFEF5_zps

 

CFF702CD-3A9E-48AD-A200-1E1B197FACC7_zps

 

More soon!

  • Like 3
Link to comment
Share on other sites

Looks great Jeroen. Now I have an example to follow. I started building the engine for this kit today. It's pretty straight forward and I thought it provided a Nic starting point.

  • Like 1
Link to comment
Share on other sites

  • Administrators

Looks great Jeroen. Now I have an example to follow. I started building the engine for this kit today. It's pretty straight forward and I thought it provided a Nic starting point.

 

Hi Wouter,

 

I might start on the Bristol Mercury this weekend. I'm not planning on adding tons of detail, since i want to finish both the mosquito and D21 for Telford... ;)

Link to comment
Share on other sites

  • Administrators

Started some detail painting in the pit and added control cables coming from the control stick.

Also wood painted the floor boards and used masking tape for the rudder pedal straps.

 

9F0E2919-9E3C-40B2-AA5C-93C803A30C7D_zps

 

29EE782B-E02D-4A07-A12B-3502148C6AB9_zps

 

This is how the cables were attached (so i need two more on the bottom):

 

Schermafbeelding%202015-05-10%20om%2009.

  • Like 6
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...