Martinnfb Posted October 20, 2018 Share Posted October 20, 2018 This is not exactly a serious build that will be meticulously recorded. I decided to slap it together for fun. Kit is super nice with exception of the rivets that i may re-punch with a beading tool in order to recreate the raised look. This whole thing should be out of the box, with addition of the deep charge or maybe seat belts. I started by priming everything in automotive primer and opening the slots on the wing Then interior went together , primed and dark washed. So as the engine. 9 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 20, 2018 Author Share Posted October 20, 2018 That dark wash is little bit too dark LOL, engine looks like some kind of barn-find And the Trumpeter's seat-belt won't cut it either Here I thinned the edges of every opening and add some plumbing. Currently working on the rubber seals for the gear bays. Main wing was partially distressed. It is hard to capture the effect in my poor light conditions , but you can see through the open slats 8 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 20, 2018 Author Share Posted October 20, 2018 Guys check out the messed up cowling on number 5 It would be nice to know what was written under the canopy frame. And what happened on the leading edge of the right horizontal stabilizer . Here is no.4 5 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 20, 2018 Author Share Posted October 20, 2018 Or maybe I should finish it as a black 2 with squished insignia and 8-ball 7 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 20, 2018 Author Share Posted October 20, 2018 And the 8-ball is on the left side as well 6 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted October 20, 2018 Share Posted October 20, 2018 Nice progress Martin and some fantastic photos too. As for no. 5, I wonder if the cowl is dented or it's the way the paint has faded. Hard for me to tell. Carl 4 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 20, 2018 Author Share Posted October 20, 2018 Thank You Carl. As of this moment I am releasing an executive decision to make your life easier. Those are dents on the cowling, hail from Calgary or something. Here is another low-res shot and 5 Link to comment Share on other sites More sharing options...
harv Posted October 20, 2018 Share Posted October 20, 2018 AWESOMESAUCE!! Your killing it my friend...... Harv 4 Link to comment Share on other sites More sharing options...
Grunhertz Posted October 20, 2018 Share Posted October 20, 2018 Great stuff!!! The trumpy dauntless is probably one off their better efforts to start with 5 Link to comment Share on other sites More sharing options...
DocRob Posted October 20, 2018 Share Posted October 20, 2018 Hi Martin, it seems you chose a great subject for extensive fading and weathering and yeah, the engine could use some maintenance. Nice pics, I will store them for my, oops, did I say 1/48, SBD with lots of AM. Cheers Rob 5 Link to comment Share on other sites More sharing options...
HubertB Posted October 20, 2018 Share Posted October 20, 2018 Great subject, Martin .... Now about that Mig 15, He-111, B-25, La-7, .... Hubert 5 Link to comment Share on other sites More sharing options...
TJTX Posted October 20, 2018 Share Posted October 20, 2018 Love the photos and weathering opportunity this build provides. 3 Link to comment Share on other sites More sharing options...
Kais Posted October 21, 2018 Share Posted October 21, 2018 Martin, I took your image to Photoshop; Tailplane looks like it's been clipped by somethins sharp. Name could possibly be "First"??? All those a/c look like they've been flogged and put away wet forever! 4 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 21, 2018 Author Share Posted October 21, 2018 Thanks Kais, the picture was taken shortly after the battle of Midway.The damage is obvious, but the name is puzzling "FALSY" or "FILSY" ?, hard to say. 3 Link to comment Share on other sites More sharing options...
HubertB Posted October 21, 2018 Share Posted October 21, 2018 Think I read somewhare that it was « Falsy ». Can’t remember where, though .... Hubert 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 21, 2018 Share Posted October 21, 2018 Looking good Martin, everyone says the SBD is probably the best Trumpeter kit around, interested on your take of it....... 2 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 21, 2018 Author Share Posted October 21, 2018 I have to run out, so just a quick series of pictures from this morning. I clean up the engine a bit and refill the underside that cracked, the clear parts are super brittle and I was rushing as usually. Putty carnage on the cracked fuselage I was shaping the cowling, adding few dings and dent, still undecided on the plane Not sure if you guys can see it on the picture, but here is my attempt fro oil-canning. Naturally it will get some extra love in the near future. 5 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 21, 2018 Author Share Posted October 21, 2018 On 10/19/2018 at 7:39 PM, harv said: AWESOMESAUCE!! Your killing it my friend...... Harv Always a gentleman, thank you kindly my friend. On 10/20/2018 at 1:03 AM, Grunhertz said: Great stuff!!! The trumpy dauntless is probably one off their better efforts to start with Thank You buddy, definitely a decent kit. Only down side is the clear plastic, other than that , lots of fun ! On 10/20/2018 at 3:57 AM, DocRob said: Hi Martin, it seems you chose a great subject for extensive fading and weathering and yeah, the engine could use some maintenance. Nice pics, I will store them for my, oops, did I say 1/48, SBD with lots of AM. Cheers Rob Thank You Rob, I am just fooling around, the engine will be hidden to cover my flat learning curve 16 hours ago, TJTX said: Love the photos and weathering opportunity this build provides. Thanks Tony, Dauntless is definitely a great opportunity to go wild, I haven't decided on the particular a/c , but you won't be disappointed ....I hope 1 hour ago, HubertB said: Think I read somewhare that it was « Falsy ». Can’t remember where, though .... Hubert Yeah, sound about right Hubert, I have been staring at that picture for a while and that would be the most feasible conclusion.... also, you forgot about I-16, Mig-3,19,29K, 190D-13,11, AviaS-99,199 , birdcage, Hellcat, Hayabusa you name it LOL 52 minutes ago, Bomber_County said: Looking good Martin, everyone says the SBD is probably the best Trumpeter kit around, interested on your take of it....... Thank you Phil, it is for sure a great kit, We shall see , what I can kick out of the box once done. 4 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 21, 2018 Author Share Posted October 21, 2018 ch, ch, ch Changes Ever wonder why all those wheels on all of those SBD builds look so skinny ? Because they are too big in diameter. So here is one after it received some love ,,, guess which one ? 7 Link to comment Share on other sites More sharing options...
Grunhertz Posted October 22, 2018 Share Posted October 22, 2018 Hehe nice one 1 Link to comment Share on other sites More sharing options...
Alan Posted October 22, 2018 Share Posted October 22, 2018 Really nice work so far Martin!! Cheers Alan 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 23, 2018 Author Share Posted October 23, 2018 Thank You Alan, I am glad you stopped by. Thank You Grunhertz, One does not simply stop being silly I had an idea! After altering the tire diameter, to drive a small screw ( that I stole it from my daughters night-light turtle) into it in order to imitate the effect of bulging tire. William was kind enough to agree to cast a set for me. Therefore there will be another update related to this in just a few weeks. Fingers cross. 6 Link to comment Share on other sites More sharing options...
Peterpools Posted October 23, 2018 Share Posted October 23, 2018 Martin Just Got-a-love it! Terrific work on the Trumpy SBD and wish I incorporated a lot of your ‘little gems’ into my long stalled build. The seatbelts are a gem and your fix on the crummy rubber tires look great. I started mine just before John’B build and he borrowed a set of wheels from another kit to resolve the wheel issue. When I get back to mine as it is no longer contest bound for a Box Stock build .. I’m taking serious notes Keep ‘em comin Peter 3 Link to comment Share on other sites More sharing options...
Sir Desmond Glazebrook Posted October 24, 2018 Share Posted October 24, 2018 I hope following this is permitted? The last time I followed something, the police arrived and handed me a piece of paper. As long as there is no paper trail, I will follow. (Why did I think of a spy plane whose pilot has an Irish accent????) I shall follow you dauntlessly in your endeavour to build this American stuka. 4 Link to comment Share on other sites More sharing options...
Martinnfb Posted October 28, 2018 Author Share Posted October 28, 2018 Thank you for the kind word Peter, we shall see wether my "screwing' method works once William cast the resin ones. Dale, thank you for stopping by, you can creep up on me anytime buddy :), if Stuka had a radial engine I would definitely build one Guns I had to cut the gun covers in order to recreate the gaps between them. It looks rather pathetic, but we will overcome ,,,, that big cutout is waiting for canvas that was preventing reflections n the glass from the instruments and harness. 5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now