Jump to content
The Great LSM Twins Group Build ends July 3, 2024 ×

Hellenic A-7E


Recommended Posts

  • 4 weeks later...

Okay, quick update on progress.

Primed with Mr Surfacer 1500 and marble coat with a variety of colours. Hoping that this will give a good start to the weathered effects with a thin layer of the grey over it.

DSCF4463.thumb.JPG.4f2cf3896f8f373a7696faba04e2a645.JPG

DSCF4464.thumb.JPG.e9ba95fc657adb09210d1d1a38561aba.JPG

DSCF4465.thumb.JPG.f1c76c40f901d7f4b8e8d2310f4156ea.JPG

Last picture highlights a few issues I had with over-thinning and too high a pressure but hopefully will be fine after the top coat.

  • Like 9
Link to comment
Share on other sites

  • 2 weeks later...

Evenin' all, some more progress.

Got the top coat on the underside. 3 coats of highly thinned Ammo FS36622 Gray.

DSCF4466.thumb.JPG.d7f80d869d8da6f762a8f839a0fd9aad.JPG

DSCF4467.thumb.JPG.3cc9ee1d40235b67cd9ce33c4fb4ede6.JPG

DSCF4468.thumb.JPG.e784b2ca122f7d522c2268d7bcdbd5e6.JPG

I'm pretty happy with how the mottling in the myriad colours shows through. My gut was saying 'go another thin coat' but I stuck with my head which said 'stop now, once everything else is painted the contrast will settle out'. Glad I did as I think another coat may have lost too much of the mottling. 

Next job is masking this off and moving on to the upper colours. Will revisit this as I want to try and simulate some worn fibreglass effects on the rear gondola between the rear gear bays like I've seen in photos. However, I just want to get the bulk colours on first.

As ever, comments and critiques welcome.

Gus

  • Like 8
Link to comment
Share on other sites

Nice build Gus, great to see a Hellenic bird on the bench. For me they always share the same amount of interest as the russian planes in the wild opportunities you have for weathering.

Also, you have reminded me.. I have the Zacto full length intake, nose correction and canopy correction set somewhere??

  • Like 4
Link to comment
Share on other sites

Thanks guys.

Nige, keep hold of the Zacto stuff, it's like rocking horse poop now and the nose and canopy corrections are going for crazy money. I just couldn't convince myself it was worth it for a build where everyone likely to see it in the display case (other than me) wouldn't know a Corsair from a Vauxhall Corsa!

  • Like 3
Link to comment
Share on other sites

  • 4 weeks later...

Bit more of my intermittent progress.

Underside all masked off and the tan areas painted and also masked. Forgot to take pictures at that stage but got a bit carried away with the progress.

So current stage is base coat of the middle green on and thin layers of various faded and deepened versions will now be added over this.

2025408451_DSCF4469(2).thumb.JPG.8c33b54f39974cfc9806d2bba2bb6436.JPG

2063822894_DSCF4470(2).thumb.JPG.2a62f6ecc33ada66b600f5ef9260fbbc.JPG

579429896_DSCF4471(2).thumb.JPG.a3bbd820db885e59167e5223106298d6.JPG

 1916297083_DSCF4472(2).thumb.JPG.15af0da1d80a3a5ac9a353ee283e4567.JPG

The preshading layers of marbling look a bit too stark on the upper wings but will hopefully fade in with the additional layers over this.

  • Like 7
Link to comment
Share on other sites

  • 3 weeks later...

Okay, bit more progress. Base painting is basically done.

DSCF4473.thumb.JPG.369bc6c0214fa3000050806362013cfb.JPG

DSCF4474.thumb.JPG.acab3985ce891b2efae0f4810ee84c32.JPG

DSCF4476.thumb.JPG.ad3bd066ad5050f3594e83dfdc6b51b8.JPG

DSCF4477.thumb.JPG.786851cd52f50accb82b535f5ca49210.JPG

DSCF4478.thumb.JPG.ee87239ca637e09be8a39a9ae7c35fdb.JPG

Used various lightened shades of the Ammo medium green and tan in very thin layers. 

Used a mix of a couple of different sizes of the Maketar generic RAF roundels set to do the roundels and Tamiya tape to do the tail. Tried to get some modulation in the mix of French Blue I used for these but it's so subtle it's invisible!

Next step is to do the over-painting / repairs on the panel lines, etc which is so prevalent on these Greek birds. Problem is I'm not sure of the best approach, so I'm looking for some advice / thoughts here.

Option 1 is gloss coat the whole thing and use liquid mask to cover the panels and spray the areas needing coverage. I've seen this approach used for putty lines on whole airframes but I'm not sure if it's overkill for this which will be more localised.

Option 2 is just to brush paint the required areas using highly thinned paint.

Any advice guys?

 

  • Like 6
Link to comment
Share on other sites

Your paintjob looks great Gus, the colours look convincing. You should render your Corsair into Martins Pic. For getting the different looks onto the panels you  could try (scrap sheet first) to carefully work some matte areas in with a fiber pen. That would dull the paint a lot in these areas.

Cheers Rob 

  • Like 4
Link to comment
Share on other sites

Guest DannyVM

Love your way to tackle the color scheme on this Greek bird mate. Great work, i learn allot of your build.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...