Jump to content
The Great LSM Twins Group Build ends July 3, 2024 ×

1:32 Fifie – The Scottish Motor Fishing Vessel


James H

Recommended Posts

  • Administrators

1:32 Fifie – The Scottish Motor Fishing Vessel
Amati

Catalogue # 1300/09
Available from Amati for €220.00

 

box.jpg

 

 

The Fifie is a design of sailing boat developed on the east coast of Scotland. It was a traditional fishing boat used by Scottish fishermen from the 1850s until well into the 20th century. These boats were mainly used to fish for herring using drift nets, and along with other designs of boat were known as herring drifters. While the boats varied in design, they can be categorised by their vertical stem and stern, their long straight keel and wide beam. These attributes made the Fifies very stable in the water and allowed them to carry a very large set of sails. The long keel, however, made them difficult to manoeuvre in small harbours. Sailing Fifies had two masts with the standard rig consisting of a main dipping lug sail and a mizzen standing lug sail. The masts were positioned far forward and aft on the boat to give the maximum clear working space amidships. A large Fifie could reach just over 20 metres in length. Because of their large sail area, they were very fast sailing boats.

 

 

Fifies built after 1860 were all decked and from the 1870s onwards the bigger boats were built with carvel planking, i.e. the planks were laid edge to edge instead of the overlapping clinker style of previous boats. The introduction of steam powered capstans in the 1890s, to help raising the lugs sails, allowed the size of these vessels to increase from 30 foot to over 70 foot in length. From about 1905 onwards sailing Fifies were gradually fitted with engines and converted to motorised vessels. There are few surviving examples of this type of fishing boat still in existence. The Scottish Fisheries Museum based in Anstruther, Fife, has restored and still sails a classic example of this type of vessel named the Reaper. The Swan Trust in Lerwick, Shetland have restored and maintain another Fifie, The Swan, as a sail training vessel. She now takes over 1000 trainees each year and has taken trainees to participate in the Cutty Sark Tall Ships Races to ports in France, Denmark, the Netherlands, Ireland as well as around the UK.

Extract from Wikipedia

 

The kit
Fifie is packed into a large, heavy box that certainly hints that there’s a good quantity of material included to build this historic fishing vessel in all its glorious 1:32 scale. I do admit to particularly liking this scale, having built plastic models for many years and indeed for magazine publication. It’s definitely something I can relate to when eyeing up the various dimensions and features. Amati’s presentation is flawless and certainly stands out, with its large, glossy lid that captures an attractive view of the Fifie. It has to be noted here that the hull is usually fully painted, with green being common above the waterline, but this model was finished to show off the beauty of the walnut timber supplied in the kit. And why not! For those that don’t know, this kit, under the Victory Models label, was designed by Chris Watton. Many of you should be familiar with that name and his design pedigree. At 1:32, this kit is no shrinking violet in terms of size. Fifie is 700mm long, 470mm wide and with a height of 230mm (sans masts).

 

Screenshot 2019-01-11 at 13.48.42.jpg

f2.jpg

f3.jpg

f4.jpg

f5.jpg

f6.jpg 

 

Lifting the lid does indeed show a box crammed with materials. Inside, we have several bundles of timber, plus a packet of timber dowel/strip/metal rod/tube, a thick packet containing numerous laser-cut sheets, another packet with plans and photo etch, and underneath the main timber, we have sail cloth and fittings packs. Thick foam is included to stop the main materials from banging around in the box.

 

Strip wood
Fifie has a double-planked hull, with the first layer being constructed from 1.5mm x 7mm lime strips. These, like many of the other bundles, are 600mm long, and very cleanly cut with no fuzzy edges Sixty-five of these are supplied. The same quality goes for the second planking layer, which is supplied as 90 strips of 1mm x 6mm walnut which is some of the best I’ve seen in a kit. There is little colour variation in these, and they look pleasantly uniform. I’ve always found Amati’s timber quality to be exceptional and this is no different. As well as elastic to hold the bundles some labels are also included to help identity the material.

 

DSC00961.jpg

DSC00962.jpg

DSC00963.jpg

DSC00964.jpg

DSC00965.jpg

Other strip wood is included (beech and walnut) for such things as deck planking, caulking (yes, caulk plank!), lining the various deck hatches, sheathing the deckhouse structures, rubbing strakes etc. These bundles are both taped and bound with elastic, with the deck planking having an identifying label also. Cutting is clean and precise.

 

DSC00966.jpg

DSC00967.jpg

DSC00968.jpg

DSC00969.jpg

 

Dowel and tube/rod

DSC00970.jpg

Various lengths of dowel is included for masting, false keel strengthening pins etc. and thicker strip wood for the timberheads. All is supplied in a nice uniform walnut colour….no nasty walnut dyes/stains in this kit! These latter lengths are also packaged into a thick clear sleeve, unlike the others. Note also various lengths of brass and copper wire, as timberheads well as some copper tube for the propeller shaft, which can of course be an integral part of building Fifie as an RC model, should you wish. Some mounting parts are included for RC conversion, but you will need to purchase other items to complete the model for radio.

DSC00971.jpg

 

 

MDF sheet items

DSC00973.jpg

Again, Amati has made extensive use of 4mm MDF for the hull false keel and bulkheads, and all are laser-cut, as are all individual wooden items in this kit. Cutting looks very precise with very little in the way of scorching, apart from very localised discolouration. I know many don’t like MDF as a material for our models, but MDF sands easily and is also warp-free, lending itself to a nice, true hull. You won’t see any of this when you start to lay planks. There are FOUR sheets of this material, and you’ll notice that there aren’t any parts numbers engraved on here. You will need to refer to the first two sheets of plans which contain the parts references.

DSC00978.jpg

DSC00979.jpg

DSC00982.jpg

DSC00983.jpg

DSC00984.jpg

DSC00985.jpg

A single sheet of 2mm MDF contains parts such as the four-piece deck, cleats, and the bulkheads and keel for Fifie’s single launch vessel.

DSC00980.jpg

DSC00981.jpg

There is also a single 6mm sheet of MDF (sheet 2698-B) which contains the four parts needed for the cradle. I’ve seen numerous sites which now sell this model claim that no stand is included with this model. Well, this sort of proves that statement incorrect. This is the same cradle shown on the box lid images. Of course, you’ll need a suitable MDF primer for this, and some nice coats of gloss lacquer to get the best from this.

DSC00972.jpg

 

Ply sheet parts

DSC00974.jpg

SIX sheets of thin ply are included for just about every other timber construction elements of Fifie, including the deckhouse, deck superstructures, keel sheathing, and bulwark capping strip. Again, all parts are laser-cut and will require minimal effort to remove any edge char.

DSC00975.jpg

DSC00976.jpg

DSC00977.jpg

 

 

Fittings

DSC00986.jpg

Two boxes of fittings are included in the very bottom of the Fifie kit box. Some of the weight bearing down has caused a small crack in the two vac-form fittings boxes, as you can see, but all parts within are absolutely fine. The first box contains the cast metal propeller, deck buckets, ship’s wheel, rigging blocks, life preserver rings and a whole load of beautifully smooth wooden balls for making the many buoys which sit on Fifie’s deck. These are perfectly circular, yet the ones on the box image are slightly shaped. Instructions show these as the balls, and you could perhaps opt to use a little putty to add some shape to these.

DSC00987.jpg

DSC00988.jpg

DSC00989.jpg

DSC00990.jpg

DSC00991.jpg

The second fitting box contains seven spools of rigging cord in both black and natural colours, nails, various cast fittings such as bollards, plus rudder pintles, anchors etc. Copper eyelets, chain and ferrules etc. make up the set.

DSC00992.jpg

DSC00993.jpg

DSC00994.jpg

DSC00995.jpg

DSC00996.jpg

 

 

Sail cloth
Should you wish to add sails, then enough material is supplied for you, in bleached white cloth.

DSC00997.jpg

 

Photo-etch

DSC00998.jpg

Very few kits come without photo-etch parts these days, and this is no exception, with TWO sheets of 0.7mm brass with a very high number of included parts. A quick scan around the sheets will easily identify parts for the mast bases, steam winch, engine skylight, capstan, deck hand pump, wheel assembly, herring shovel, tabernacle, mast rings, etc.

DSC00999.jpg

DSC01000.jpg

DSC01001.jpg

DSC01002.jpg

 

Acetate and card

DSC01003.jpg

I have to say I’m not entirely sure what the card/cartridge paper is for except for maybe general use, but the thin acetate is obviously for the cabin windows.

 

Instructions and plans

DSC01012.jpg

Without a doubt, Amati produce some of the very best instruction manuals to come with any model kit. For reference, check out my Orient Express Sleeping Car review and that of Revenge. Fifie is no different with a luxurious and fully-pictorial, 64-page publication. Whilst this isn’t perfect-bound as with the previous reviews, it is in full colour and produced to a standard that’s still far higher than many contemporary manufacturers, with each stage being shown under construction so you get a perfect idea about what is required at that point in construction. Text is also in English, or at least in the sample I have been sent. The rear of the manual contains a complete components list. 

DSC01013.jpg

DSC01014.jpg

DSC01015.jpg

DSC01016.jpg

DSC01017.jpg

DSC01018.jpg

DSC01019.jpg

DSC01020.jpg

DSC01021.jpg

DSC01022.jpg

Backing up this publication is a set of seven plan sheets. The first two of these are for identifying the various timber and PE parts. The others show general profile and detail imagery, as well as masting and rig drawings. Remember that the hull itself is built entirely from the photographic sequences so everything you see on these drawings is for external details.

DSC01004.jpg

DSC01005.jpg

DSC01006.jpg

DSC01007.jpg

DSC01008.jpg

DSC01009.jpg

DSC01010.jpg

DSC01011.jpg

 

Conclusion
I have to say that you get a lot of kit for your money with Fifie, and when I first asked Amati what they envisaged the RRP to be, I was quite surprised at this. Everything about Fifie is quality, from the packaging and presentation, to the beautiful, photographic manual, fittings, sheet and strip timber, all the way to the superbly drawn plans. I’m very surprised that the gestation period has taken so long for them to bring this excellent kit to market. It’s also a Chris Watton thoroughbred. If you’ve seen his previous designs, then you’ll be familiar with the format of Fifie, which was quite the different vessel for Chris to tackle, when everyone seemed to think he would only design fighting vessels, armed to the teeth with cannon. I must admit that Fifie did take me quite by surprise too. The very shape of this iconic and historic vessel is so homely and welcoming and for me, invokes images of those times when fishing communities were happy and thriving. Whether you’re a fan of Chris’s work or not, Fifie is most certainly a kit that you should consider dropping into your virtual shopping cart next time you visit your favourite online model ship/boat retailer, and of course, if RC is your thing, then this kit will also suit your genre!

 

VERY highly recommended!

 

My sincere thanks to Amatifor sending out the sample kit you see reviewed here. To purchase directly click the link at the top of the article to take you to Amati’s online shop or check out your country’s local distributor. Plans are also available from Amati, for €21.00

 

side1.jpg

side2.jpg

 

 

logo.jpg.eb0c2e20a95f6e7488a127746159de43.jpg.ee2a18ddb6632115d317e0bf4c046144.jpg


  • Like 3
Link to comment
Share on other sites

Love it, great review, thanks for that, I might consider to build one of those. twenty years ago, I built a fisherman from Billing Boats and liked the kit a lot. The Fifie though has a really elegant shape for a fishing tug.

Cheers Rob

  • Like 2
Link to comment
Share on other sites

Great review and a beautiful looking kit. Never had an interest in boat kits but I might pick one of these up due to so many local connections. My late father-in-law also ran a pleasure boat out of Anstruther in the 70s.

Unfortunately, the Reaper from Anstruther that James mentions was quite badly damaged in an unfotrtunate accident at a local fish festival in Johnshaven last year. She was tied up under sail in the inner harbour to allow the public on and a freak gust of wind tipped her on her side and threw a few folk into the harbour. Luckily no-one was hurt but quite a bit of damage was done.

  • Like 2
Link to comment
Share on other sites

I've built a few of the Midwest wooden boat kits, and have a couple of the Latina kits in the stash.  Nothing that looks as nice as this kit though.  The only thing holding me back from buying one of these is the price.  Not saying it's not worth the asking price, just have to wait until more modeling funds are available!

Link to comment
Share on other sites

  • 10 months later...

The planking strips are 60 cm long and the model is 70 cm long.

Big mistake. This model can NOT be planked using a single strip in length as shown in instructions.

All planking strips have to be spliced. Much more work and not as nice looking especially on the outside rows.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...