Administrators JeroenPeters Posted February 20 Author Administrators Posted February 20 Small satisfying steps 5
Administrators JeroenPeters Posted February 21 Author Administrators Posted February 21 The T-bar at the rear cockpit deck came broken in the Sprue. Made a new one from thin rod and sprayed the lot. 8
Administrators JeroenPeters Posted March 5 Author Administrators Posted March 5 Cracked on with the nose. 3D printed Bombsight installed. Polished the nose glass one last time. It doesn’t get better than this. 8
Administrators JeroenPeters Posted March 23 Author Administrators Posted March 23 I know it looks like no progress, i prepped all the slats, ailerons, gear, ready for paint. Also adding the Eduard exterior set which makes a difference. 9
Administrators JeroenPeters Posted March 27 Author Administrators Posted March 27 Prepping all the parts. Adding brake lines, PE details, etc. 7
Administrators JeroenPeters Posted March 29 Author Administrators Posted March 29 Here are the resin Radu Brinzan Wikingerschiffe. 6
Administrators JeroenPeters Posted April 9 Author Administrators Posted April 9 Another evening of marbling. 6 1
Administrators JeroenPeters Posted April 14 Author Administrators Posted April 14 Finally found chrome that looks kike chrome for the gear. This comes from a pen. Ordered from Alixpress. And first Alclad colours to the engine. 6 2
FullArmor Posted April 15 Posted April 15 7 hours ago, JeroenPeters said: Finally found chrome that looks kike chrome for the gear. This comes from a pen. Ordered from Alixpress. And first Alclad colours to the engine. interesting. can you share the link to the product. 2
Administrators JeroenPeters Posted April 15 Author Administrators Posted April 15 Made a long session spraying rlm76. Now to figure out the exact scheme of rlm80 and 81. 7
Administrators JeroenPeters Posted April 15 Author Administrators Posted April 15 15 hours ago, FullArmor said: interesting. can you share the link to the product. It was on Amazon: https://www.amazon.nl/gp/aw/d/B09LY1KS7D?psc=1&ref=ppx_pop_mob_b_asin_title 1 1
Administrators JeroenPeters Posted April 17 Author Administrators Posted April 17 Starting the Rlm81 and Rlm82 mottling. 6
Administrators JeroenPeters Posted Saturday at 05:21 PM Author Administrators Posted Saturday at 05:21 PM Very slowly building up the colours. This weekend i’ll start cutting my own masks. For the smaller stencils i have 1manarmy. 6
Administrators JeroenPeters Posted Saturday at 07:47 PM Author Administrators Posted Saturday at 07:47 PM Creeping along… 6
Martinnfb Posted Saturday at 09:51 PM Posted Saturday at 09:51 PM An intricate paint job indeed. I just noticed something. ...There is some kind of instrument in the rear of the canopy, under the last canopy segment. Looks like a radio receiver. Reminds me about recording equipment that Avia use to use during the tests of S-92. 2
Administrators JeroenPeters Posted Sunday at 07:17 PM Author Administrators Posted Sunday at 07:17 PM 21 hours ago, Martinnfb said: I intricate paint job indeed. just noticed something. ...There is some kind of instrument in the rear of the canopy, under the last canopy segment. Looks like a radio receiver. Reminds me about recording equipment that Avia use to use during the tests of S-92. Interesting! Hadnt caught that! I think i’ll draw it up in 3d and print it so it will slide right in. Not too late! Thnx a lot. 5
Administrators JeroenPeters Posted Sunday at 07:18 PM Author Administrators Posted Sunday at 07:18 PM More camo done. I’ll add some more distressed variation later. 7
Administrators JeroenPeters Posted Monday at 02:04 PM Author Administrators Posted Monday at 02:04 PM I traced the MDC / Brinzan decals in Illustrator in order to cut these with my Circuit Maker 3. If the numerals are too small, I might try to laser cut them. We'll see! 5
Administrators JeroenPeters Posted Monday at 07:44 PM Author Administrators Posted Monday at 07:44 PM So... started work on the 'device'. Thank you very much Martin! It's a frame that passes under the rod that runs along the rear deck. The two devices hang from elastic wire in the frame to keep vibrations to a minimum I guess. I'll see if I can find some more pics or even the name of this device. 5
Administrators JeroenPeters Posted Tuesday at 07:41 PM Author Administrators Posted Tuesday at 07:41 PM Oops 3
Administrators JeroenPeters Posted Tuesday at 08:52 PM Author Administrators Posted Tuesday at 08:52 PM no luck finding any info online on the two devices, but the reference photo gives me some idea. 5
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now