-
Posts
5,791 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Bomber_County
-
-
That’s great news Scott, she will now be back on your case as far as deliveries. But seriously wonderful news…….
- 4
-
Well recommend the Dspiae bits, this is my setup. The bit holders fit all their 3.175 shanked tools. The chuck assembly is magnetic plus a collet. The assembly is plastic but I prefer the small size for one hand operation. The bits themselves having amazing chip removal qualities and can also be purchased separately.
- 6
-
19 hours ago, DocRob said:
Today my third Model Factory Hiro kit arrived, a 1968 Ferrari 312. I decided against the same car with wings, because I like the undisturbed view at the beautiful 12 cylinder engine. Before I received the kit, I thought about riveting the whole body with tiny resin rivets, but after inspecting the resin part, decided against, as there are so many so close to each other, I would fear for the stability of the body.
I think, this will be my first MFH building venture, to get a grip for the materials, specially white metal.
I try to get a magnetic tumbler polisher to my place at the world, but until now without success.
Also my Proxxon drill stand arrived, which will be a nice ´third´ hand for metal polishing and of course drilling with my trusted old Proxxon drilling machine.
Cheers Rob
Good catch. Please post a WIP, I’m intrigued on how these go together. My only whitemetal modelling was with 4mm railway kits. I never soldered but with the right solder, flux and iron it is very successful…….looking forward to the build…….
- 5
-
11 hours ago, shark64 said:
Incredible modeling going here .
Thank you so much, much appreciated , I’m nowhere near your standard of modelling, hopefully one day………
- 1
-
Good news Peter…..
- 4
-
- 3
- 2
-
Interesting views, I have only ever done one jet so still a virgin……the jury still out, the F18 comes with Canadian markings………the F4J was a ZM so doing a Kinetic is I think be a learning curve…..
- 2
-
Jeff, absolutely stunning, your weathering is perfect. Congratulations on stunning build………
- 2
-
1 hour ago, DocRob said:
Looking really good Phil. Like Peter mentioned, these ZM kits have their annoyances. I found some on their TA-152, but somehow got her finished. Yor P-51 is a beauty and I will reference to your build, when I dig out my RAF/late boxing.
AAAAAAAnd, bring on the figures .Cheers Rob
Thanks Rob, I do like ZM’s approach and the tooling and engineering is very good. I thought you might want to see the figures, remember they are my first attempt………pics to come…..
- 3
-
13 hours ago, Peterpools said:
Phil
Looking forward to your finished build photos and I'm sure they will be mighty good.
Peter, I’ll try……😬
- 2
-
16 hours ago, Jeff said:
Geez, Phil, this is beautiful.... outstanding job... I love this ! Take a bow!
Jeff
Jeff, you are to kind but much appreciated……
- 2
-
14 minutes ago, CANicoll said:
Beautiful job!! Putting your build thread away for future reference. Thanks!
Thanks Chris, I’ll get some more pics soon. When I bought this off eBay it did come with a bit of AM, might an idea to think about adding a little bit…..
- 3
-
5 hours ago, Peterpools said:
Phil
Your ZM P-51 looks terrific and what an accomplishment, as I've seen quite a few started and your build is the only one to cross the line. When I tackled the ZM 109, I found the kit frustrating and even confusing at points and can fully appreciate the work and effort into put into the kit. A beauty for sure.
Looking forward to the vignette with ZM figures. 🏆🏆🏆
Thanks Peter much appreciated. The build was enjoyable it was the painting that did me. The only criticism would be the engine mounts to the fire wall and the alignment of the engine. My centreline is very very slightly off. I hope my photos are good enough…..
- 2
-
-
On 4/6/2024 at 11:30 PM, RalphSarc said:
Thanks Jeff. The kit comes with a decal sheet plus I have an additional CAF decal sheet.
Any updates…..
- 1
-
3 hours ago, Spitfire said:
Nice one, I have the RAF version and this build thread will come in mighty handy in the future.
Cheers
Denis
Thanks Dennis, I also have the RAF ZM in the stash, let me know if there anything specific you need to know……
- 1
-
Stunning, one day when I’m older I might get close but I doubt it………
- 2
- 1
-
So again as with the Mossie, I’m calling this pony finished. It came with some ZM figures so I’m going to have a go at adding them to the final vignette. Here is a taster before again I attempt to photograph it, I’m still working on the figures so maybe another week before I can get the finished pictures……..As my second ZM it was enjoyable and an education with their philosophy of making the kit as close to the real plane. Would still recommend highly…….
- 9
- 1
-
Seems all my builds are coming to an end. This is now ready for the spray booth. Halftracks are notoriously difficult to spray as a completed unit. So next weekend (back to the workstation) booth and fun to be had………the kit came with the 20mm trailer so I am scratch building that into an ammunition trailer………..the metallic finish on the flak unit is so I can blow German grey over it and weather back to metal, I hope…….
- 3
-
1 hour ago, Peterpools said:
Phil
WOW, brilliant build and I completely agree that the Tamyia Mossie was a incredible build and truly worth every penny.
Take your time with the photographs as we'll all be patiently waiting.
🏆
Thanks Peter, I’m so glad I didn’t jump into it when I bought it back in 2017 as I didn’t have enough experience to do it justice. Saying that, if you are methodical it’s a breeze to build, so perhaps I wouldn’t have screwed it up. I did build another in a minute but I’ll wait a little. Hope everything goes well tomorrow 🤞
- 3
-
2 hours ago, BlrwestSiR said:
Looks good there Phil. Nice to see it cross the line.
The big reason I found mine to be a Mojo killer was building it at the same time as the HK Mossie.
Thanks Carl, it’s there are a couple items I’m not quite happy about but they are minor, overall wonderful kit to build……
- 2
-
-
Thinking of you both.
- 4
-
Ben / Jarrod, you guys are storming along on this one, stunning ..looking forward to next stage…..
- 2
JetMads 1/32 Viggen
in LSM 1/35 and Larger Work In Progress
Posted
Absolutely stunning Gus, I tried to touch up the Mosquito after stencils etc with a brush……hmmmmmm, I reverted back to temporary masking and blowing a coat for the touch up…….