Irishman1

I’m on Camano island, just north of Seattle both beautiful!! Less humidity here tho!!!

Where are you located? Kinda looks like my view!!!

It’s close to 1:95 I think… I tried to look at kits you can buy and decided they were out of scale with a lot of the details on them. I did need to buy some pieces that I couldn’t make like anchors and the maiden head, chain and dead head that I didn’t make, although I did end up making a lot of my dead heads out of doweling too. I traced the plans from the curry sark museum in England off my pc computer screen and they were about 1/95 or so. I know my masts ended up a little taller than they should be but no one will notice. It is 34-1/2 inches long and 25 inches high

Thanks, I cut the sails from Indian muslin and then found that thin thread glued to them looked great as sew lines around the edge’s and vertically to look like the reinforcement lines.

I have the same problem with my 1/24 scale aircraft builds too,, where to display them?? I have some hanging in my shop but they are covered with dust for sure😢

I have a small make up blush brush I stole from my wife to TRY to keep the dust off. As you can see though from the pictures it’s very difficult! I looked at buying or making a glass/plex case and it was very expensive. However when something takes several years to complete it might be worth spending the money

This is my cutty sark ship model I built a few years ago. My wife says a built it three times though. Not happy with the first thing, rebuild and learn from the second and finally get it right on the third! I would trace the real blueprints from the computer screen and then build the part as close to it as possible. I made all the pumps from washers and metal rods. I soldered the railings from my modeling brass and cut the sails from Indian cotton.the anti fouling copper is actually 2000 cut strips of copper snail repellent tape. I made the water keg’s from wood dowels. All raining and ratlines are hand tied. So much more

I forgot the airfix mosquito too!! Haven’t really finished it tho. I’ll pull it down and get cracking on weathering it plus some other details. Filled some seams on the hellcat and I’m moving on to the engine!

A few more

Hers a few more pics of progress on the hellcat… and a few pics of my other 1/24 scale airfix models, and one old Bandai 1/24 zero

A quick little note: I made a leather document/map pouch tucked next to the seat!

A little more progress on the instrument panel and cockpit . Made a hand held mike for the radio

Just a bit more! Test fitting seat belts and fixing the radio wiring

We’ll, I’ve built the airfix 1/24th p-51, fw190, bf109 and the mosquito. Now the big hellcat.. this seems like the best airfix 1/24 scale model they’ve made to date. I still have the car door typhoon under my bed yet to though so we’ll see!! Great forum.