Administrators James H Posted December 27, 2014 Author Administrators Share Posted December 27, 2014 Thanks guys, Most paint is Gunze, including the RLM66. I use Vallejo for detail painting, and I also used Mr Paint for the struts (yet to be shown) and the interior of the nacelle (also to be shown). The only aftermarket stuff here are the HGW seat belts and some Airscale instrument and placard decals. I have used lead wire and other scraps here and there, but the rest is OOB. For rivets, I use the MDC rivet tool. This is a jewellers beading tool, meaning you apply one by one. These are mostly added with the photo-etch spacing guide you see. Where the curves make it difficult, I do them freehand. 1 Link to comment Share on other sites More sharing options...
rkranias Posted December 27, 2014 Share Posted December 27, 2014 PM inbound Link to comment Share on other sites More sharing options...
RalphSarc Posted December 27, 2014 Share Posted December 27, 2014 Since this is no doubt a limited release kit I’ll have to save my pennies fast and buy one! I’m getting ready to re-scribe and re-rivet the Typhoon after finishing the seams. I have a MDC rivet tool but this will be my first time doing either to a model so should be interesting!! Link to comment Share on other sites More sharing options...
One-Oh-Four Posted December 27, 2014 Share Posted December 27, 2014 Wow! That's serious progress,Jim! Looking good! You must have brain damage to tackle those rivets like that, though! I gave up after one P-47D stabilizer half... I have to pick up the pace on my model, now that I have brought order to my living room. No more stacks of kits, decals and paint on the ground floor! Link to comment Share on other sites More sharing options...
rkranias Posted December 28, 2014 Share Posted December 28, 2014 Wow! That's serious progress,Jim! Looking good! You must have brain damage to tackle those rivets like that, though! I gave up after one P-47D stabilizer half... I have to pick up the pace on my model, now that I have brought order to my living room. No more stacks of kits, decals and paint on the ground floor! I bet Mrs. B is very happy. 2 Link to comment Share on other sites More sharing options...
polsen Posted December 28, 2014 Share Posted December 28, 2014 Lookin' good James ! I was checking this kit out at telford but I didn't buy it. I'm now really kicking myself. Keep us posted, Cheers, Pete 1 Link to comment Share on other sites More sharing options...
Administrators James H Posted December 28, 2014 Author Administrators Share Posted December 28, 2014 Lookin' good James ! I was checking this kit out at telford but I didn't buy it. I'm now really kicking myself. Keep us posted, Cheers, Pete Order one direct from Fly. It's still a reasonably-priced kit even with shipping from mainland Europe. One word of caution.....marking the holes in the canopy, for those antenna masts, is a real bitch! Link to comment Share on other sites More sharing options...
Administrators James H Posted December 30, 2014 Author Administrators Share Posted December 30, 2014 The Arado is now assembled and I took advantage of the zero-wind weather today so that I could spray Tamiya Grey Fine Surface Primer over this one. Here is the result. It's not perfect. There are a few things to sort, but all minor. So glad that crappy tan coloured plastic is now history. Link to comment Share on other sites More sharing options...
Administrators JeroenPeters Posted December 30, 2014 Administrators Share Posted December 30, 2014 Furry nice... Nice and tight. Link to comment Share on other sites More sharing options...
airscale Posted December 30, 2014 Share Posted December 30, 2014 <<<<<<<<<<<<<<THUD>>>>>>>>>>>>>> that was my jaw hitting the floor (again...)... simply superb Jim, words fail me.. I love the cockpit especially - what punch set are you using? it looks far superior to my waldron set... thanks Peter Link to comment Share on other sites More sharing options...
Administrators James H Posted December 30, 2014 Author Administrators Share Posted December 30, 2014 Hi Peter, I use the RP Toolz punch set. It's pretty damn good. There is a small set which ranges from 0.5mm to 2mm , and a larger set for 2 - 4.5mm holes. They are consistent, sharp and accurate. Of course, you'll notice my choice of cockpit decals. This model will be finished in a week for Military Illustrated Modeller. Love promo'ing your stuff Link to comment Share on other sites More sharing options...
TeWika Posted December 31, 2014 Share Posted December 31, 2014 Hi James, I must ask the cockpit plackcards looks prima- is it artistic licences or accurat placing, I can't find any info? All the best Ted Link to comment Share on other sites More sharing options...
Administrators James H Posted December 31, 2014 Author Administrators Share Posted December 31, 2014 Hi James, I must ask the cockpit plackcards looks prima- is it artistic licences or accurat placing, I can't find any info? All the best Ted Many are there because the NASM machine shows them (or similar) in place. A small number are added because I reckon they would probably have been there. Link to comment Share on other sites More sharing options...
TeWika Posted December 31, 2014 Share Posted December 31, 2014 They look the part..I must get them! Again beautiful build James Happy new year All the best Ted Link to comment Share on other sites More sharing options...
Administrators James H Posted January 3, 2015 Author Administrators Share Posted January 3, 2015 FOUR hours of decaling. Yes.....F.O.U.R, on a model which still isn't as decaled as some are, but here she is. I've added a Klear coat here, and tomorrow I'll add the wash and install the Jumo 004 (ex-Trumpeter Me 262) to the nacelle. Hope you like her. 2 Link to comment Share on other sites More sharing options...
wackyracer Posted January 3, 2015 Share Posted January 3, 2015 Oh yes. Looking good. And the Horten appears I see? Link to comment Share on other sites More sharing options...
Administrators James H Posted January 3, 2015 Author Administrators Share Posted January 3, 2015 Oh yes. Looking good. And the Horten appears I see? ...you noticed Link to comment Share on other sites More sharing options...
hacker Posted January 3, 2015 Share Posted January 3, 2015 When MDC came out with RB Productions Arado l thought of if l eventually got one l would use a Trumpeter Jumo engine in it. 1 Link to comment Share on other sites More sharing options...
wackyracer Posted January 3, 2015 Share Posted January 3, 2015 ...you noticed Can't wait to see how you tackle it. One amazing kit + JH = Wow! 2 Link to comment Share on other sites More sharing options...
Administrators James H Posted January 11, 2015 Author Administrators Share Posted January 11, 2015 All finished folks! Check it out HERE! Link to comment Share on other sites More sharing options...
Alan Posted January 18, 2015 Share Posted January 18, 2015 Amazing build Jim!! I love the exposed engine!!! Cheers Alan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now