Administrators JeroenPeters Posted April 3 Author Administrators Posted April 3 Figuring out the composition 7
Administrators JeroenPeters Posted April 6 Author Administrators Posted April 6 Underside ready. Time for some camo. The grey will be Ocean grey with a little bit black mixed in. 8
Administrators JeroenPeters Posted April 7 Author Administrators Posted April 7 Started with the upper surfaces with a bit darkened Ocean grey. 9
Administrators JeroenPeters Posted April 8 Author Administrators Posted April 8 Bring on the dark green 11
Administrators JeroenPeters Posted April 9 Author Administrators Posted April 9 Getting her colours 10
Administrators JeroenPeters Posted April 9 Author Administrators Posted April 9 Cees Broere just pointed out an error in the camo which i should fix. Hopefully it won’t show afterwards 1
Administrators JeroenPeters Posted April 11 Author Administrators Posted April 11 Camo is down. Found out i need to get soms fresh Gunze Sky H74 for the codes and fuse band. Hopefully i’ll get around to getting some tomorrow 9
Administrators JeroenPeters Posted April 13 Author Administrators Posted April 13 Really happy i can have the masks lasercut for the ‘Bellows Uruguay’ beneath the canopy, 7
Administrators JeroenPeters Posted April 15 Author Administrators Posted April 15 The Gunze Sky arrived today, so couldn’t resist painting the fuselage band. 8
Administrators JeroenPeters Posted April 18 Author Administrators Posted April 18 Sprayed the upper roundels. 7
Administrators JeroenPeters Posted April 20 Author Administrators Posted April 20 The MH Models masks for the fuselage roundels, underside wing roundels and tail flash are designed for the earlier versions. Not the P7111 I am making. This means a different Thickness of the various elements. I will cut my masks myself on the Cricut Maker 3. 4 1 2
Administrators JeroenPeters Posted April 20 Author Administrators Posted April 20 Started drawing my own masks to cut them on my Cricut Maker 3. I'm cutting Tamiya masking paper. The blade cuts right through these, but with some masking tape I can keep it all together. 9
KevinM Posted April 21 Posted April 21 Lots of high tech in my world going into this build me I.......just build like Joe. 1
Administrators JeroenPeters Posted April 21 Author Administrators Posted April 21 Getting the masks in place. I love kabuki paper masks better than vinyl to start with. 5
Martinnfb Posted April 21 Posted April 21 I’m big fan of the Kabuki paper as a better option to vinyl, but to figure out the cutting depth and power adjustment could be a painful process. Looking good Jeroen. 3
BlrwestSiR Posted April 21 Posted April 21 Printing the masks on a grid must make it much easier to align things. 2
HubertB Posted Tuesday at 07:03 AM Posted Tuesday at 07:03 AM 7 hours ago, BlrwestSiR said: Printing the masks on a grid must make it much easier to align things. It does. Although I have found that Kabuki COULD stretch when lifted and repositioned many times … Hubert 3
Administrators JeroenPeters Posted Tuesday at 07:35 PM Author Administrators Posted Tuesday at 07:35 PM Fuse roundels done! 8
Administrators JeroenPeters Posted Wednesday at 07:17 PM Author Administrators Posted Wednesday at 07:17 PM More done. 7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now