GazzaS Posted August 2, 2022 Author Share Posted August 2, 2022 1 hour ago, mark31 said: Wonderfull foil work And yes i know the feeling of your atempts for the hard places to foil. But when it is going down right you can look at it and say thats a job wel done. Looking forward to the next update Mark Thank you! 2 Link to comment Share on other sites More sharing options...
GazzaS Posted August 2, 2022 Author Share Posted August 2, 2022 40 minutes ago, DocRob said: Hey Gary come on, at least you spared masking the canopy . Earnestly, I really like your results, foiling looks so very different from painting and thank you for explaining your method so thoroughly. It may help in the future, only if.... Cheers Rob I'm glad you like the results, Rob. The canopy is a whole other problem. See.... the glue is a PVA based glue. So in places where you use only a thin piece, adherence isn't guaranteed. Especially if your foil needs to wrap around an edge. So, I'm still working around the canopy issue. It would have been easier had i closed the canopy... but, I wanted it open. I may go to the LHS and buy some more BMF.... BMF has a rubber based glue. 4 Link to comment Share on other sites More sharing options...
DocRob Posted August 2, 2022 Share Posted August 2, 2022 I'm always astonished, how good PVA glue sticks, when dried properly and not only to wood. I will use it more in plastic modelling, for clear parts mainly. Isn't there a way to glue on the foil to the canopy framing and then cut it after using toothpicks to get the contour right? This way, you have at least no stress in the foil. Does oiling the blade really helps cutting foil? I only ask, because oil and glue don't go together well and with narrow parts, like framing, the oil could prevent the glue to adhere properly. Cheers Rob 4 Link to comment Share on other sites More sharing options...
Bomber_County Posted August 2, 2022 Share Posted August 2, 2022 Simply stunning Gaz, sounds like there is nothing simple about foil though…… 1 Link to comment Share on other sites More sharing options...
GazzaS Posted August 2, 2022 Author Share Posted August 2, 2022 14 hours ago, DocRob said: I'm always astonished, how good PVA glue sticks, when dried properly and not only to wood. I will use it more in plastic modelling, for clear parts mainly. Isn't there a way to glue on the foil to the canopy framing and then cut it after using toothpicks to get the contour right? This way, you have at least no stress in the foil. Does oiling the blade really helps cutting foil? I only ask, because oil and glue don't go together well and with narrow parts, like framing, the oil could prevent the glue to adhere properly. Cheers Rob Hi Rob. The oil doesn’t help to cut the foil. What it does is to prevent the blade from grabbing and tearing the foil. You really can’t do without it. You would almost certainly tear every panel you laid. Foiling uses a lot of blades. Dull blades will cut foil. But they will also tear foil. I will tell you from personal experience that there is nothing more vexing than ruining a perfect panel on this very last step. 4 Link to comment Share on other sites More sharing options...
GazzaS Posted August 3, 2022 Author Share Posted August 3, 2022 10 hours ago, Bomber_County said: Simply stunning Gaz, sounds like there is nothing simple about foil though…… Thank you, Phil. I don’t feel that foiling is complicated. Yes, there are a few things to learn. But it’s not difficult. It does take some patience. But I find it a lot easier for my brain to accept real metal than to accept the lie that tells me that paint, no matter how shiny, looks like a metal surface. There will be some painted parts on this bird. There are just some shapes that can’t be made without annealing the metal. 2 Link to comment Share on other sites More sharing options...
DocRob Posted August 3, 2022 Share Posted August 3, 2022 8 hours ago, GazzaS said: Foiling uses a lot of blades. Dull blades will cut foil. But they will also tear foil. I will tell you from personal experience that there is nothing more vexing than ruining a perfect panel on this very last step. I'm using my Japanese grindstone to re sharpen my blades. One side for grinding and one for honing. After that, the blades are sharper than factory fresh. Cheers Rob 4 Link to comment Share on other sites More sharing options...
GazzaS Posted August 7, 2022 Author Share Posted August 7, 2022 Hello friends. I finally got hold of some real thin foil. Thinner than I've ever used. But... I feel like I've lost my touch. These panels just don't work out as well as they did a few years ago when I did the last one. Tiny errors. More slips of the hand. My vision, not what it was. Here is the new bling... in the sun. Weathering.... Will tone it down a bit I reckon. 4 Link to comment Share on other sites More sharing options...
Peterpools Posted August 7, 2022 Share Posted August 7, 2022 Gaz Foiling on the Mig from my end looks awesome and so well done. Terrific work for sure 3 Link to comment Share on other sites More sharing options...
mark31 Posted August 7, 2022 Share Posted August 7, 2022 Just wonderfull Mark 3 Link to comment Share on other sites More sharing options...
Martinnfb Posted August 7, 2022 Share Posted August 7, 2022 mega shine 2 Link to comment Share on other sites More sharing options...
GazzaS Posted August 7, 2022 Author Share Posted August 7, 2022 8 hours ago, Peterpools said: Gaz Foiling on the Mig from my end looks awesome and so well done. Terrific work for sure 5 hours ago, mark31 said: Just wonderfull Mark 5 hours ago, Martinnfb said: mega shine Thank you, fellas. 2 Link to comment Share on other sites More sharing options...
GazzaS Posted August 8, 2022 Author Share Posted August 8, 2022 So... anyway. Weathering the aluminum actually happens all through the process. And I didn't want my MiG to look like a patchwork quilt. So, to help it along, we polish the aluminum with aluminum polish(found at the local car parts and accessories store). After polishing we clean any residue off with acetone. After that I painted all of the non-foiled parts. I took some inside and outside photos to give you a better idea about it's current state. Now, it needs to dry for a bit. Pretty much over this kit for now. Gonna play with something else. Happy modelling! 5 Link to comment Share on other sites More sharing options...
mark31 Posted August 8, 2022 Share Posted August 8, 2022 Ooo boy i need sun glasses. Nice and shiny Mark 3 Link to comment Share on other sites More sharing options...
Peterpools Posted August 8, 2022 Share Posted August 8, 2022 Gaz Outstanding, simply a beautiful finish - the polished aluminum is surely the Real McCoy and I'm right with Mark - need my Ray Bans. Is this as far as you're going with the Mig? Fingers crossed you will take it to completion. 1 1 Link to comment Share on other sites More sharing options...
GazzaS Posted August 9, 2022 Author Share Posted August 9, 2022 16 hours ago, Peterpools said: Gaz Outstanding, simply a beautiful finish - the polished aluminum is surely the Real McCoy and I'm right with Mark - need my Ray Bans. Is this as far as you're going with the Mig? Fingers crossed you will take it to completion. Thank you Peter. It's nowhere near done. When finished it will be in a small dio hopefully looking like an operational machine. 2 Link to comment Share on other sites More sharing options...
GazzaS Posted August 10, 2022 Author Share Posted August 10, 2022 Comrades! Our intrepid pilot... He is from CZplusmodels. Pretty hard to find, actually. And... because every commie needs a comrade: He not only gets a comrade with a steering wheel... but a Tamiya Gaz 67 Jeep comes with it. I had to mill out the seat with my Dremel to make him sit in a closer-to-human-normal fashion. I wanted to get him situated before I added detail to the Gaz. And then I had an inspiration to mill out the seats a little and add some texture. I'll do more, later. The plastic fuzzies really obscure your idea of what you've actually done looks like. So I knock them down with a bit of Tamaiy extra thin. I love a glue that has more than one purpose! Now... I have to go research Soviet uniforms of the period. I know that in the 80's they had different colored shoulder boards for different types of units. I'm not so sure about the 50's, tho. Martin? 3 Link to comment Share on other sites More sharing options...
Martinnfb Posted August 10, 2022 Share Posted August 10, 2022 Kim aproves Uniform for pilot is basically the same as WW2 Aviation epaulets were in blue HERE 2 1 Link to comment Share on other sites More sharing options...
GazzaS Posted August 10, 2022 Author Share Posted August 10, 2022 3 minutes ago, Martinnfb said: Kim aproves Uniform for pilot is basically the same as WW2 Aviation epaulets were in blue HERE Spasiba, Tovarisch! 2 Link to comment Share on other sites More sharing options...
Martinnfb Posted August 10, 2022 Share Posted August 10, 2022 or else 2 2 Link to comment Share on other sites More sharing options...
GazzaS Posted August 10, 2022 Author Share Posted August 10, 2022 Nice! A little cheesecake for the VVS. 3 Link to comment Share on other sites More sharing options...
Martinnfb Posted August 10, 2022 Share Posted August 10, 2022 Serving motherland ! 2 Link to comment Share on other sites More sharing options...
DocRob Posted August 10, 2022 Share Posted August 10, 2022 Great finish on the foiled Mig, Gary, the shine is outstanding. Love to see, what you do with the figures, it's 48 scale, right... . Cheers Rob 3 Link to comment Share on other sites More sharing options...
Peterpools Posted August 10, 2022 Share Posted August 10, 2022 Gaz Awesome figures and imagine a Jeep being included as part of a steering wheel kit 😉 Looking forward to seeing the dio come together and leave it to Martin to come up with fantastic detail photographs 2 Link to comment Share on other sites More sharing options...
Martinnfb Posted August 10, 2022 Share Posted August 10, 2022 Korean stuff 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now