JohnB Posted March 24, 2023 Author Share Posted March 24, 2023 Over engineered tail section. Geeze Louize!!!! 🤪 4 1 Link to comment Share on other sites More sharing options...
Peterpools Posted March 24, 2023 Share Posted March 24, 2023 John Neat, careful and precise work, as your test fitting shows. Nice new choice for the paint scheme - definitely a colorful alternative and different. Of course, right now, I'm still planning on Hartmann's scheme but who knows things always seem to change. Yup, way over engineered on the tail and exactly the same issues both Gaz and Carl had. Note to myself - go back and look at all the suggested fixes. Why ZM just could do the tail as everyone else is a mystery to me. 4 Link to comment Share on other sites More sharing options...
JohnB Posted March 24, 2023 Author Share Posted March 24, 2023 1 hour ago, Peterpools said: John Neat, careful and precise work, as your test fitting shows. Nice new choice for the paint scheme - definitely a colorful alternative and different. Of course, right now, I'm still planning on Hartmann's scheme but who knows things always seem to change. Yup, way over engineered on the tail and exactly the same issues both Gaz and Carl had. Note to myself - go back and look at all the suggested fixes. Why ZM just could do the tail as everyone else is a mystery to me. Thanks Peter. I just used some plastic putty on the tail and it looks "passable" I guess. 3 Link to comment Share on other sites More sharing options...
JohnB Posted March 24, 2023 Author Share Posted March 24, 2023 Can y'all believe it!!!! 😲 I managed to get the engine attached! Broke a couple of supports doing it but reinstalled them afterwards. Far from perfect but I'll take it! 7 Link to comment Share on other sites More sharing options...
Peterpools Posted March 24, 2023 Share Posted March 24, 2023 John The ZM 109 is surely turning into an adventure. Just glad you were able to fix the broken brackets and get the engine glued into place. 3 Link to comment Share on other sites More sharing options...
HubertB Posted March 24, 2023 Share Posted March 24, 2023 The fix to the tailplane looks convincing, John. Well done 👍! Hubert 3 Link to comment Share on other sites More sharing options...
JohnB Posted March 24, 2023 Author Share Posted March 24, 2023 14 minutes ago, HubertB said: The fox to the tailplane looks convincing, John. Well done 👍! Hubert Thank you Hubert. 3 Link to comment Share on other sites More sharing options...
GazzaS Posted March 24, 2023 Share Posted March 24, 2023 7 hours ago, JohnB said: After some consideration I have decided to model this a/c instead of Hartmann's. Good. I like diversity. 5 Link to comment Share on other sites More sharing options...
JohnB Posted March 24, 2023 Author Share Posted March 24, 2023 2 minutes ago, GazzaS said: Good. I like diversity. Me too Gaz. 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 25, 2023 Share Posted March 25, 2023 Nice work John. Even though it's a challenging kit, you're just ploughing through it. 3 Link to comment Share on other sites More sharing options...
JohnB Posted March 25, 2023 Author Share Posted March 25, 2023 18 minutes ago, BlrwestSiR said: Nice work John. Even though it's a challenging kit, you're just ploughing through it. The toughest part so far was the engine. Hopefully it will go well now. 🤞 4 Link to comment Share on other sites More sharing options...
JohnB Posted March 25, 2023 Author Share Posted March 25, 2023 Test fitting the wings. So far it looks like they will fit okay but we will see! 7 Link to comment Share on other sites More sharing options...
Peterpools Posted March 25, 2023 Share Posted March 25, 2023 John Might nice progress. Your 109 is coming along fantastically. I'm working on the front office on my 109 and it's going to take a while to work through everything. 4 Link to comment Share on other sites More sharing options...
JohnB Posted March 25, 2023 Author Share Posted March 25, 2023 47 minutes ago, Peterpools said: John Might nice progress. Your 109 is coming along fantastically. I'm working on the front office on my 109 and it's going to take a while to work through everything. Thank you Peter. 3 Link to comment Share on other sites More sharing options...
JohnB Posted March 27, 2023 Author Share Posted March 27, 2023 Wings are on. Next I'll begin assembling the flaps, etc. 6 Link to comment Share on other sites More sharing options...
Peterpools Posted March 27, 2023 Share Posted March 27, 2023 John Making terrific progress and I would say you are over the hump with the ZM 109 but I don't want to jinx you. I finally finished the main front office and spent a full day doing the seatbelts from a combination of AirScale and Eduard sets. Still swimming through a sea of parts that will never be seen - what a waste of time for sure. 3 Link to comment Share on other sites More sharing options...
JohnB Posted March 27, 2023 Author Share Posted March 27, 2023 13 minutes ago, Peterpools said: John Making terrific progress and I would say you are over the hump with the ZM 109 but I don't want to jinx you. I finally finished the main front office and spent a full day doing the seatbelts from a combination of AirScale and Eduard sets. Still swimming through a seal of parts that will never be seen - what a waste of time for sure. Waste of time and $$$$$$ Peter. 🤪 3 Link to comment Share on other sites More sharing options...
Peterpools Posted March 27, 2023 Share Posted March 27, 2023 Absolutely! Money and time on ZM's part could have been better spent on working on part fit, better instructions or even, now here is a shocker: a lower price! 3 Link to comment Share on other sites More sharing options...
JohnB Posted March 27, 2023 Author Share Posted March 27, 2023 If I ever decide I want to build another Bf-109 it won't be one by ZM. In my opinion the Hasegawa kits are quite satisfactory and don't suffer from poor instructions and poor fit (and high price!). We can always purchase after market items to "dress 'em up" (decals, resin detail sets, etc). 3 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted March 27, 2023 Share Posted March 27, 2023 Excellent progress John, everything seems to be going according the plan. I was hoping that ZM would release a simplified version of this kit, but still, you making it look easy. Good show! 👍 Cheers M. 4 Link to comment Share on other sites More sharing options...
JohnB Posted March 28, 2023 Author Share Posted March 28, 2023 1 hour ago, Martinnfb said: Excellent progress John, everything seems to be going according the plan. I was hoping that ZM would release a simplified version of this kit, but still, you making it look easy. Good show! 👍 Cheers M. Thank you Martin. It has had it's moments! LOL 2 Link to comment Share on other sites More sharing options...
GazzaS Posted March 28, 2023 Share Posted March 28, 2023 Looking good, John. There are some funny incongruities about the kit. They hyper-detailed engine and the detail-less Galland hood. The great fit of so many parts vs. that tail. Despite all of that, it's a better kit than anyone else has created. 5 Link to comment Share on other sites More sharing options...
Peterpools Posted March 28, 2023 Share Posted March 28, 2023 Gaz and John I'm in your camp John with my feeling on the kit. I've been working as carefully as I can and still struggled with some of the cockpit parts. I have my reservations on how well I did with the landing gear attachments parts at this stage - surely there has to be a better way of molding those two parts in place, so they are spot on the money and so key to the build. Mine look good (❓) but I won't know for sure how I did until later on in the build. Absolutely way over engineered with way too many never to be seen parts after assembly and while the instructions are very detailed, the isometric drawings are way more confusing then a help and even a good number of the plain drawings show way too much of unnecessary details for locating the parts being worked on. 2 Link to comment Share on other sites More sharing options...
JohnB Posted March 28, 2023 Author Share Posted March 28, 2023 44 minutes ago, Peterpools said: Gaz and John I'm in your camp John with my feeling on the kit. I've been working as carefully as I can and still struggled with some of the cockpit parts. I have my reservations on how well I did with the landing gear attachments parts at this stage - surely there has to be a better way of molding those two parts in place, so they are spot on the money and so key to the build. Mine look good (❓) but I won't know for sure how I did until later on in the build. Absolutely way over engineered with way too many never to be seen parts after assembly and while the instructions are very detailed, the isometric drawings are way more confusing then a help and even a good number of the plain drawings show way too much of unnecessary details for locating the parts being worked on. Agreed Peter. Way over engineered. I guess ZM hasn't heard of KISS method. 🙄 1 Link to comment Share on other sites More sharing options...
JohnB Posted March 28, 2023 Author Share Posted March 28, 2023 8 hours ago, GazzaS said: Looking good, John. There are some funny incongruities about the kit. They hyper-detailed engine and the detail-less Galland hood. The great fit of so many parts vs. that tail. Despite all of that, it's a better kit than anyone else has created. Thanks Gaz! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now