Landlubber Mike

That Frank Drebin line always cracks me up!

Looks really sharp John! Well done!!

Thanks Peter! I was going to build just the plane and not include it in a diorama, but after coming across that picture, I don't think I can pass up the opportunity. It tells a cool story, and has just enough details in the picture to make it interesting - at least to me! I'm itching to start working on it, but I really need to make some progress on the Walrus and Albatross to make the GB deadline. This time of year for me is usually pretty busy and modelling time is sparse 😬

Agree with Rob - at a minimum, go for upgraded brass barrels. If your kit doesn't come with PE railings, I'd get some of those as well. If it were me, I'd probably also look into adding pre-cut wooden decks and maybe some additional PE aftermarket like I used in my Shimakaze build (linked in my signature) or you see on Rob's current build. PE (and now resin) aftermarket sets make a huge difference (and is almost a must for 1/700 in my opinion), but it all depends on what you want to get out of your build. The PE set for my Shimakaze build added at least double, and probably triple, the build time when you factor in adding all the details to guns, torpedo launchers, deck items, platforms, the bridge, etc. You can get comprehensive sets that have almost all of the upgraded detail you need, or you can add aftermarket a la carte as you need it. But, ship PE takes a certain level of discipline/masochism

You can never have too much aftermarket...just saying!

Nice! Looking forward to seeing this one come alive. You probably went a little too light on the aftermarket though 😉

Looking really great Rob. Your work with the PE is pristine and it shows. On Eduard's new decals, I heard of people having issues with them. Not exactly sure if people figured out a foolproof way to remove the carrier film.

Thanks Martin! Good to know on the wings. For the undercarriage, I believe I used CA - glued the pieces in, let it set, then flooded the non-visible area with more CA for added strength. The attachment points are a bit weak, at least they were on the 1/48 kit. Come to think of it, I might have also used some epoxy for the LG, but can't recall.

Oh I saw that one - looks like a sweet kit!

Can you tell my wife that? 🤔

Thanks Ernie - as if there should be any debate!

Neil, just remembered that our resident experts @Clunkmeister and @Martinnfb are building our kits. Ernie and Martin, did you guys do anything special to attach the wings on your Buffalos? Neil and I are getting close to that stage on our builds and are a bit disappointed in the kits' lack of anchor points for the wings.

There is only one logical way to hang the TP roll!

Thanks Hubert, that's very helpful to know. Maybe I'll skip the Vector and look elsewhere then. When looking for alternative R-1820s, I found the one you ordered: Also found this one from PrintScale which looks promising: The PrintScale one looks closer to the R-1820-G5 that my B-239 had (round ignition ring versus the more horseshoe-shaped one), though it looks like they have the ignition wiring opposite - the wire on the left side of the cylinder is wired into the front of the cylinder according to the picture below (from Naval Fighters Number 104), while PrintScale has the wire coming from the right side. Ugh, never easy is it? Maybe I'll take a look at the Vector one and see what is going on with it.

After some noodling, I think I'm going to try to recreate this picture in a model diorama: Sorry for using this log to record my thoughts, but I think I've worked through some of the trickier parts, which are: 1. Representing the BW-378 - fortunately, the kit includes decals for BW-378 (Camo C). The picture above suggests that the plane was re-painted/painted over in a winter camo scheme that looks very similar to the kit's scheme in Camo A, so I'll use A as the model with C's markings. Super lucky here, as not having the numbers would have probably made me scrap this whole crazy idea. The one thing I'm not sure about is whether in adding white for winter camo, the tail would have been repainted from white to blue - my guess is not since it seems like typical practice was to apply white paint over existing paint - here the olive and black areas of the plane - rather than repaint sections like the tail. Too bad though, as I think the blue tail looks pretty sharp. 2. Engine - with the panels open, I'll need to have a more detailed engine than the kit engine. The B-239 used a 950HP Wright R-1820-G5 Cyclone. Looking around, there are a few mid-late R-1820 aftermarket engines out there. Fortunately I already have a Vector engine (32-005) that looks like it might fit the bill. I had bought it for the Dauntless kit I won in the Christmas raffle here on LSM a few years ago, so I might try and use that one and see if it fits. 3. Cowl interior parts - on my 1/48 kit, I had opened similar panels using a CMK engine set which included the engine mounting pieces. For this 1/32 kit, it looks like things will be much simpler. I won't have to cut the access panels from the fuselage halves (as in step 1 on the 1/48 build) because the halves end in the right place since the 1/32 kit includes separate parts for the access panels. Plus, I believe that the 'curved-in' shape of the ends of the fuselage halves, together with the engine mounting pieces in the kit, get you PUR9 and PP1 and PP2 from the 1/48 kit (see instructions below). So, I think that all I will need to do is modify the kits access panels to show the one on the ground and the one held by the mechanic on top of the nose of the plane (which incudes the air vent, which should be fairly easy to replicate). Lucked out here (I hope) as replicating PUR9 wouldn't be easy. 4. Figures. Ultimately, these might be the trickiest parts of the diorama. I'll probably find figures that most closely match the poses of the three in the picture, and Frankenstein them with other parts like "winter heads with hats", gloves, and boots, and probably add or modify details using Milliput or similar materials. 5. Other diorama items. The ladder and wheel chocks should be fairly easy to replicate. The tarps will be tricky - I might use something like Modelspan, which I think I would be able to wet, fold and drape. If anyone has any other suggestions, I'd love to hear them. There are a few products to replicate snow, so hopefully that won't be an issue. I'd really like to replicate that birch tree in the background if I can - it adds a nice touch to the scene! All in all, I think this might be a lot easier to accomplish than I first feared. Thanks for bearing with me on my little build treatise!

Wow PW!! Beautiful work!

Well that sucks - was hoping that the rear canopy issue was only on the 1/48 kits. It wasn't quite as noticeable to me on the last kit until I started looking at fitting the canopy. Sorry also about the fuselage halves. The back half seems to fit fairly well, so what I might do is start by gluing the back half and maybe the bottom on the front halves, then work out what to do on the top of the front half. I'm worried that if I try to force the top half, I might have seams popping elsewhere as it looks like I could have a 2-3mm gap. Might be a better idea for me to close the gap with a piece of styrene. I might put this one to the side for a bit, as I think I might attempt to do a diorama recreating one of the pictures I posted earlier (see my next post below), and I really need to get moving on my Walrus/Albatross group build project. So, you might end up passing me pretty quickly. I'm always happy to take a look at things if you have any questions and want to bounce things off someone.

Thanks Rob - I think that will show a bit more interesting details if I go that way, rather than show it as fully buttoned up and ready to launch off the catapult (kinda boring).

I just looked at the wings and fuselage halves and you're totally right. Ugh. I didn't read anyone having a problem. Here are four logs I have bookmarked that I check along the way: https://www.britmodeller.com/forums/index.php?/topic/235066413-‘taivaan-helmi’-brewster-buffalo-132-special-hobby/& https://modelingmadness.com/review/allies/us/usn/reybuff.htm https://www.britmodeller.com/forums/index.php?/topic/235002982-special-hobby-132-buffalo-mk-1/ https://www.modelforum.cz/viewtopic.php?f=57&t=125858&hilit=Brewster+buffalo The last one of the four took an approach that I probably will do - scuff up the mating surfaces, and insert a small rod or two, epoxy, and hope for the best. See page 2 of his log. Though, he might have broken the wings off which is why the mating surfaces look scuffed - a little hard to understand even with the translation.

Hey Neil, I hadn't looked at the wings until I saw your post. Arghhh!!! 🤬 Why would they do the wings that way?? In the minute I've had to think about it, I'll probably epoxy brass rod to help give a little more stability to the bond. I tend to be a lap modeler, and drop or bang into things all the time. I'd be really concerned with just gluing with cement or CA. Ugh, ruined my afternoon, thanks! 😆 Oh, one thing while I'm thinking about the wings. On the 1/48 kit, they had a divot on the underside of each wing for lights. In the 339-23 that I built in 1/48, only one wing should have had a light so I filled the other in. I believe that my current instructions say to fill one of them, but in case yours doesn't, you might want to look into it if you're into accuracy.

Thanks Peter for sharing your techniques and consumables. I'll have to look into trying those. Really appreciate it! And really sweet Ford!! Love it! As an FYI, I saw that some people go with MCW Finishes for paints - they have lots that match specific car colors. I think they may be lacquers and enamels. https://mcwfinishes.com/

Since I'm on a roll, I wanted to share some B-239 pics I found online. I wasn't planning on putting this model in a diorama, but I think it would be pretty cool to diorama the first or third pictures below. Unfortunately I'm not having luck with finding appropriate figures and numbering could be tricky. BW-378 (March 17, 1942) - looks to have more white in camo scheme, likely because of winter camo due to date, similar to Camo A in kit: Another of the BW-378 (same plane as Camo C in kit which is dated late 1941): BW-383 (March 17, 1942): Interesting camo scheme: The famous Lt. Hans Wind (302 combat sorties, 75 confirmed kills, ranked second on Finnish aces list): Of course, if the model ends up looking like a piece of crap, I could go for BW-372 which was pulled from a Russian lake in 1998: https://www.warbirdforum.com/bw372.htm

Looks like a well made kit. Looking forward to this one!

Thanks Peter, appreciate the kind words! I'm still fairly new to plastic modeling and am still feeling my way around. I did a couple of car models and used Tamiya rattle cans and Vallejo Model Air paints. Those were fine, but Tamiya's line of colors is a bit limiting so I decided to branch out. A lot of car guys swear by Zero Paints and their 2K gloss coats, but those you definitely want to be wearing a respirator for. I tried them out on my Morgan 3-wheeler (old kit from Entex). Really nice coverage, but the solvents you recommended to clean out the airbrush afterwards are pretty harsh. I left a small bristle brush sitting in the solvent trying to clean out my nozzle and the bristles actually started melting. 😳 Not sure if I posted this before, but the British green paint job came out pretty nice (for the chrome parts, I used Vallejo Metal Color): On the plane side, I started with Tamiya and Vallejo. I quickly found Mr. Surfacer to be my absolute favorite primer though for everything - cars, planes, ships, etc. So, I tried using Mr. Color paints on my 1/48 Buffalo build and really liked them. I also have Alclad paints on the shelf that I tried once and liked. I need to figure out what to use for clears. I've liked Mr. Color (rattle can and airbrush) but I almost had a disaster with them on my Wildcat (likely sprayed too heavy). So I don't know what I want to do. It's been really nice like using Vallejo so far on the Walrus and Buffalo. For interiors, I'll stick with Vallejo as there is little need to tape usually. For exteriors, I'll probably stick with Mr. Surfacer primer and generally use a mix of Mr. Color and Vallejo for colors. I am going to try using Vallejo for the exterior on my Walrus. Of course, just after the paints arrived, I o saw a build log online where someone similarly used Vallejo which came up in sheets off the model - had to strip it down and re-paint 😳 Hopefully I have a better experience! For this build, I think I'm going to use Tamiya or Mr. Color for the yellow wing tips and fuselage band - those will go on first, and then I can tape and not really worry about the tape lifting (and the opacity and coverage is better than what I can get from Vallejo I think). Rest of the colors will probably be a combination of Mr. Color and Vallejo. For me, acrylics is mostly about the ease of use and cleanups. I am less concerned about the toxicity, but probably should be. I use a spray booth in my basement that vents to a half window - unfortunately I can't open the screen, so just have the vent pipe up against the screen and I leave the window open for an hour or more. Given the amount I spray, I think I should generally be ok with the filter, venting, etc., but probably should still try to switch over to acrylics as much as possible. Sorry for the long treatise!

I'm a little more used to those kind of fit issues after trying to shoehorn the Aires detail set into my Tamiya Wildcat build. That probably added 40 extra hours to the build (if not more), though probably would take a lot less time now that I've been through that exercise. I know what you mean though. It is a bit frustrating when things just don't fit and it's not from user error. You have to wonder if kits are test built before release. Maybe it's just my personality, but I wouldn't release anything that seemed to have clear fit issues. It's too bad though, as Special Hobby kits some really cool subjects. After this one, I have their Siebel 204D and Lloyd C.V ser. 46 kits, so maybe I have some masochistic tendencies.