Jump to content
Status Updates

JeroenPeters

Administrators
 View Profile  See their activity

  • Posts

    4,672

  • Joined

  • Last visited

Everything posted by JeroenPeters

  1. JeroenPeters
    Pit as good as done. One thing missing from the Quinta set is the oxy regulator on the right sidewall. I took that of the Kitsworld set.
  2. JeroenPeters
    After some matt varnish. Perfect for some additional washes and scratches. Getting close to closing the fuselage.
  3. JeroenPeters
    Busy with the HGW harnesses. This usually takes me three evenings. Almost done. Just need to drape and glue the straps into position. And then seal it all in with matt varnish, followed by a wash. The drawing shows an early Sutton harness and how it was attached. No Whirlwind but probably quite similar.
  4. JeroenPeters
    Working on the Seat going by reference material. You can see how the early sutton harness is attached to the seat. I love using the AK weathering pencils to get a worn look. The leather will get some more lighter areas along the edges.
  5. JeroenPeters
    Slowly getting there. Next up: HGW seatbelts
  6. JeroenPeters
    Everywhere and nowhere. Just scored some Whirlwind crash parts. Need to verify their authenticity if possible. Got those from Ebay.
  7. JeroenPeters
    Just got this amazing book. A real must have!
  8. JeroenPeters
    This is my favorite part. Adding life to the pit. Still a long way to go.
  9. JeroenPeters
    Slowly bringing life to the cockpit.
  10. JeroenPeters
    Started adding the Quinta decals and some washes. Lot’s more work to be done!
  11. JeroenPeters
    Started to put it all together and add wiring.
  12. JeroenPeters
    Alclad white aliminium with a bit of chrome is on.
  13. JeroenPeters
    Primed the inside of the fuselage. Check out the Kitsworld detail set. I havent touched it but it’s starting to fall apart. Really poor quality. I would recommend the Quinta Studio set.
  14. JeroenPeters
    Love it!
  15. JeroenPeters
    Pretty happy with my new radio print
  16. JeroenPeters
    First cockpit green.
  17. JeroenPeters
    Reprinted the radio. Perfect now. Also started painting the cockpit with some black pre shade.
  18. JeroenPeters
    It all seems to fit. might reprint the radio, since some supports ruined some details.
  19. JeroenPeters
    All fitted. A real pain but hopefully worth the effort. I’ll now scratch the panel and face the same dilemma the whirlwind fighter project faces: what was printed on the information panel inside the hatch?
  20. JeroenPeters
    Managed to find a rare fuel gauge from a Hawker Tempest. The Tempest had two. The upper one showing the nose tank contents and the bottom one (with two dials) showing the wing tanks contents.
  21. JeroenPeters
    Installing the frame (which needed trimming…) and stringers.
  22. JeroenPeters
    I reprinted the frame 1mm bigger to make it fit the fuselage better. I’ll make the wiring with lead wire and stringers with thin rod.
  23. JeroenPeters
    First test print. Looks ok. We’ll see after UV curing.
  24. JeroenPeters
    If you think the engine is one solid chunk of resin. Think again…
  25. JeroenPeters
    Quinta instrument panel. It only offers you an early version blind flying panel, but it makes up in quality over the Kitsworld version by miles.
×
×
  • Create New...