BlrwestSiR Posted June 10, 2023 Share Posted June 10, 2023 Thanks Scott! That confirms what I saw in the film. 1 Link to comment Share on other sites More sharing options...
Bomber_County Posted June 10, 2023 Share Posted June 10, 2023 Scott, looking very nice indeed. I’m concerned with my build for the GB that I’m going to be rushed to complete. I think you’re perfectly on target……. 2 Link to comment Share on other sites More sharing options...
ScottsGT Posted June 10, 2023 Author Share Posted June 10, 2023 19 minutes ago, Bomber_County said: Scott, looking very nice indeed. I’m concerned with my build for the GB that I’m going to be rushed to complete. I think you’re perfectly on target……. I’m not doing this in the group build. Already put two in there and I just didn’t want to be rushed this time of the year. Spring time is my busy time of the year around the home trying to get yearly maintenance issues done before the “Welcome to Hell” heat and humidity kicks in. Thankfully I’ve been very productive and only have 2 projects to go before I’m done with my list. Gotta change the power steering pump and lines on my old truck and soft wash the exterior of the house. Hopefully, all done next week, weather permitting. But nothing like sitting at my bench in 70 degree temps looking out across the lake knowing it miserable outside. 🤪. Eventually I’ll wind up floating in the lake consuming beers on my wife’s days off. 4 Link to comment Share on other sites More sharing options...
ScottsGT Posted June 17, 2023 Author Share Posted June 17, 2023 Ok, I think I’ve just experienced a Bob Ross “Happy little accident”. I was doing some touch ups on the top finish and then laid down a wet coat of leveling thinner to blend new pain with existing. I then thinned my clear and started laying down some wet coats. Thinned it a little more and went back over it once again for a second clear prior to decals and weathering. Suddenly I noticed my panel lines were getting darker. Apparently I put in enough thinner for the paint down in the panel lines to float up and out of them. Looks like I won’t have to apply a wash to the panel lines! Update: Well, looks like I do have some touch ups to do. Got some puddling of color that just looks wrong. A little more airbrush work is in order. 4 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 2, 2023 Author Share Posted July 2, 2023 Corroguard LE’s done! And a couple coats of black Mr. Color down so far. 1 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 2, 2023 Author Share Posted July 2, 2023 Oh, and I forgot to follow up with the Revell/Tamiya landing gear I cobbled together. She stands on her own legs now! Wait, a Tomcat is a male cat. So should I refer to its gender identity as a she? Oh man, my pronouns are a mess here. 🤪 1 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 2, 2023 Share Posted July 2, 2023 Nice progress Scott and interesting happy accident there with the panel lines. If you could even call it an accident. Not sure on the gender thingy but I've got two of them on the bench and they may have gotten busy while I was away from the bench. Take a look at what's behind the nose section... 3 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 4, 2023 Author Share Posted July 4, 2023 Anyone want a good laugh at my expense? You ain’t gonna believe this shit…. And I cannot believe no one pointed it out during my build. My wings are upside down and on the wrong side. 🤪 Don’t have any idea how to fix this mess now. 1 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 4, 2023 Author Share Posted July 4, 2023 And FWIW, it almost took flight across the room. I stopped myself and walked away for now to go jump in the lake. 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 4, 2023 Share Posted July 4, 2023 1 hour ago, ScottsGT said: Anyone want a good laugh at my expense? You ain’t gonna believe this shit…. And I cannot believe no one pointed it out during my build. My wings are upside down and on the wrong side. 🤪 Don’t have any idea how to fix this mess now. Wait, what??? I hadn't noticed. I'm going to have to look closer. Link to comment Share on other sites More sharing options...
HubertB Posted July 4, 2023 Share Posted July 4, 2023 3 hours ago, ScottsGT said: Anyone want a good laugh at my expense? You ain’t gonna believe this shit…. And I cannot believe no one pointed it out during my build. My wings are upside down and on the wrong side. 🤪 Don’t have any idea how to fix this mess now. I had not noticed it either. Now that you mention it, it’s obvious. And it’s going to be a bear to correct, agreed Hubert Link to comment Share on other sites More sharing options...
GusMac Posted July 4, 2023 Share Posted July 4, 2023 4 hours ago, ScottsGT said: Anyone want a good laugh at my expense? You ain’t gonna believe this shit…. And I cannot believe no one pointed it out during my build. My wings are upside down and on the wrong side. 🤪 Don’t have any idea how to fix this mess now. Nightmare Scott. If it's any consolation I did the same thing on my 1/48 build for the group build but at least with that one you just slide the wings on over the guide so it was easy to get them off and fix it. As Hubert says that'll be a bit harder on this one. Link to comment Share on other sites More sharing options...
ScottsGT Posted July 5, 2023 Author Share Posted July 5, 2023 I just removed both wings. Not the satisfaction of taking a sledge hammer to it, but slid my exacto blade along the LE forward of the folding wings, pried it up and popped them out. Sure, a little damage to touch up. But doable easy enough. I’ll repaint the wings first though. 4 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 5, 2023 Share Posted July 5, 2023 Sounds somewhat painless there Scott. On the Tamiya, the fuselage halves are screwed together with the screw heads very visible so mine are filled with epoxy putty. No way to take that one apart. 1 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 5, 2023 Author Share Posted July 5, 2023 Well, found the confusing part. I don’t feel too bad now. Each wing is labeled “Bottom Right” and “Bottom Left”. Problem is, it’s not the bottom, but rather the top. Right and left are correct. So I’ve just wet sanded them down and getting ready to re-spray before installing them. Oh, and add insult to injury? The wife set up the grandkids inflatable pool in the back yard. Had a hole in it. It deflated and she left it there two days. Looks like I get to have fun with sod next week. 😡 Everyone is like oh well, it will grow back. Obviously they are idiots about a yard. 1 1 2 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 5, 2023 Share Posted July 5, 2023 Talk about intentionally trying to screw things up for the builder. Makes me wonder if I made the same mistake when I built my Revell Tomcat all those years ago. As for the lawn, that's one reason we don't have grass. Just lots of dirt, I mean ground cover. At least it was ground cover before Jimmy. 2 2 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 5, 2023 Author Share Posted July 5, 2023 A friend just came over earlier. I got to vent with him over the lawn. My 84 yo FIL comes to visit and he brings a huge dog he has no business owning at his age. Huge dogs leave huge piles and he’s never cleaned up behind a dog in his life. It’s kind of satisfying watching my wife run around the yard with bags in hand picking up behind him. I hate to admit it, but as I get older, I’m better understanding the old guy in the neighborhood when I was a kid that was yelling at anyone that dared step foot on his grass. I have an M1 Garand and a classic Ford in the garage. I’m about to go Walt Kowalski around here. 4 Link to comment Share on other sites More sharing options...
KevinM Posted July 5, 2023 Share Posted July 5, 2023 6 hours ago, ScottsGT said: Obviously they are idiots about a yard Hey when you work that yard it's shows some of your pride in it. 2 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 6, 2023 Author Share Posted July 6, 2023 Making some progress here finally. Repaint on the wings might be done this evening. I did the tops first using the black base method. On the bottom, white primer and then some gray tones to bring out the marbling effect and panel lines. I think I’ve watched the dog fight scene in Carl’s thread 20 times already trying to pick up on weathering and colors. I did notice that the bottoms of the ailerons were left white during the transition while the rest of the bottom was FS17875 white. Just gotta let the white dry so I can tape it up now. 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 6, 2023 Share Posted July 6, 2023 Nice recovery there Scott. That really is a great scene in the film while the Tomcats play with the Zeros. Just like how a real cat plays with their prey. 2 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 6, 2023 Author Share Posted July 6, 2023 The prey is pretty safe around here. He spends all day lounging around and looking for belly rubs or setting a trap for some sucker to think he wants his belly rubbed! 5 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 6, 2023 Author Share Posted July 6, 2023 Bottoms done! Overnight dry, respray the silver LE and reinstall everything and start the repairs. 5 Link to comment Share on other sites More sharing options...
Peterpools Posted July 7, 2023 Share Posted July 7, 2023 Nice work on the wings - looking good. 1 Link to comment Share on other sites More sharing options...
ScottsGT Posted July 7, 2023 Author Share Posted July 7, 2023 Back together again! Amazing how much better it looks with correct wing droop and not rise. just a few inches of seams to fill and correct. I did discover a major color shade difference from the original paint work. Especially the bottom FS white. I didn’t put enough down the first time and I’m going to have to go back and lay down a bit more to get it right. 6 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 7, 2023 Share Posted July 7, 2023 Very nice recovery Scott. The seams don't look that bad. My Lanc fuselage looks the same as I had to saw it apart to fix some of the fuselage windows. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now