JeroenPeters

Oh man.... What a great instruction! And here I am.. happy when I get all the parts indicated in the instructions are added! Thanx again for sharing your ART with us!

Finally got the fuse together. Wings are not glued on yet. The fit is tricky! That's all I can say:

Hi George, If you use a permanent adhesive, it will bind and staf on. You can even rinse excess snow with water! Cheers, Jeroen

Thnx George, As said you can keep altering the look of the snow and build it up. It really adds texture as well:

Ok! So here goes. After doing my hair and managing to safe some for my model I filled the sieve. Be careful not to fill it to the brim. That way larger amounts of snow might fall over the edge: I think you can compare the substance with powder sugar. Very very fine. Only when you look up close, you'll notice it's glistening like... snow! And when you make it wet, i looks like... molten snow! Quite incredible stuff. I sprayed the model with the hair laquer (George, you paying attention?) and tapped the sieve above it. As it fell next to the model, I blew it against the model. That gave a really interesting effect: Also note that I wrapped the figure with wet tissue paper to protect it from the snow. I'm using different techniques on this model. In the end I'll make the effects uniform. The nice thing is that you can keep altering the effects by brushing excess snow off and putting it back on in a different style. I will continue playing with this model, but I think you'll get the idea. Have a look on the website for different techniques and effects. Conclusion: I have seen many winter diorama's at model shows and only a few that got the snow and ice look just right. I think that this product will make it a walk in the park. It takes some practice and time, but the results can be quite amazing. If you are an armour modeler this stuff is a need to have. The full kit as reviewed is available at 22 pounds. One refill bag is available at 8 pounds. Both can be bought here: http://precisioniceandsnow.myshopify.com Thanks to Precision Ice and Snow for the review sample (and the T-shirt!). Jeroen Peters

Next step: before sprinkling on the snow with your sieve, spray the area that needs to be covered with an adhesive. This can be Photo mount, spray mount, hair spray or something else. When using hair spray you might want to change the spray cap (if possible) to get a better spray. Some hair laquers tend to be a bit too misty. It's best to place a non sticky surface behind the model to catch the snow that doesn't land on the model. This way you can re-use this. The instructions indicate that the best control will be obtained when holding the model in one hand and sprinkling the snow with the other. Especially when you want the snow to have that 'wind blown' look from one side. This is what I use for larger chipping effects and will now also use as adhesive. It's in dutch, but I guess you can guess it says: Hair Laquer.

PRECISION ICE AND SNOW for the realistic depiction of snow and ice effect in all scale modelling. Introduction When this product was brought to my attention by fellow LSM staff member Doogs I thought: I know that stuff.You mix it with white glue and water and smear it on your model. I have used products like that in the past and was never happy with the results. Not natural. Too random and blobby. When trying to confirm my first thoughts I went to the website: www.precisioniceandsnow.com . The first photo of an english taxicab made me look a bit further than my nose (as we say in Holland). Browsing a bit further through their site I found it difficult to discern between real and unreal. The stuff I used to use has crystals that are way too large in size. This however looks like the real deal. So I volunteered for this review and met up with Steve and his wife at the Telford model show. Steve showed me examples of different applications of the snow and ice. Wet snow, light powder snow, snow blown by the wind from one side,… amazing… Steve proudly showing his product at Telford: The Box The product comes in a very sturdy black box. (I also got a T-shirt, but I guess that’s just one of the perks of reviewing for LSM:) After opening it up I found two pretty heavy bottles of Snow medium. A stainless steel sieve and two sheets of instructions. The product is chemically and biologically safe. Non toxic and non hazardous. That’s nice to know! My Model The model I took from my cabinet to test the snow on is a 1/35 Stürer Emil from Trumpeter. It has Friulmodel metal tracks and the full Voyager upgrade: Metal barrel, resin mantel, PE fenders, brackets and interior and masked stenciling. Just to prove how much confidence I have in this stuff! As you can see I have used a little bit of my 'old product' on this model some years ago. Time to do it right!! NOTE: No Precision Ice and Snow has been used on the model shown here. Yet! Stay tuned for the second part of this review: The application

Hi Jim, It's actually quite simple if you use the right materials. And cheap. I use a base of acrylic light brown. Let it dry well. Then make some small dots with brown (burnt sienna) artist oils. Good quality oils. And then start smearing a wide flat brush, slightly damp with rectified (non aggressive) terpentine until you reach the effect you're looking for. Just try it on a test piece. If something goes wrong, post it here and I'll see what's up! Cheers, Jeroen

Bertl! Wow! Thank you so much for sharing these techniques! They really add so much life and individuality to the WnW kits. Cheers, Jeroen

Really cool build. Your weathering technique is quite unique and striking. Keep them coming!

Here's whats visible through the hatch. Needs rivet detail.

Thnx Erik! This pic clearly shows the ribbing I was talking about on the inside gun bay. Going through the PE spares box to find something suitable.

Here's some progress on the gun bays. Jim brought it to my attention that there is an ugly seem on the outside gun bay wall. In reality there isn't and in reality there are reinforcement ribs. These will be added later. I cut small pieces of plastic card and am now trimming them to a good fit. I'm lazy, so I'm not making exact fittings over the total length. Only what can be seen. I also opened another hatch, which will reveal the air pressure reservoir that powers the gun. Number 2 in the diagram above. And I will off course add wiring. Then I added some Eduard PE to the skid. The Meng skid has a strange stack of cubes, which should look like Eduard crafted it. A hinge for the middle arm. Then I sanded the two 'arrows' from the bottom of the skid and replaced them with the more detailed Eduard ones'.

Hi Jim, I guess the easiest way is by Dry-brushing. Take a large old sof brush, put a little Testors (Model Master) Chrome on it and smear and wipe till practically nothing comes off. Really almost nothing. Spray a surface in the colour you want, let it dry and gently brush with the soft brush. I use Testors Chrome. I also like to spray a base of Alclad and the next day thinly spray the colour I want. But if you're starting out the first option works best. I love the Testors screw cap Chrome because it never really dries on your brush. instead it turns powdery which makes you use and re-use this brush without cleaning. Hope this helps. Cheers, Jeroen

No! Don't let me scare you off! This kit is actually quite easy. It fits very very well. There's just one small area to correct as you can see in my WIP. And that's the space between the ailerons and wing. This plane is cool and if you build it, I will help you where I can. Really happy you're drawn in! Cheers, Jeroen

That looks amazing... Very impressive. The PE must have been a nightmare! What did you use for pigments? Cheers, Jeroen

Hi Jim, These are also pretty cool: http://www.entertainmentearth.com/prodinfo.asp?number=DRZVE2061#.Uo3mi5Ho480

Call of Duty IV opening scene! Yeah! Nice.

That's a great technique! I have the same paints so I'm sure I should be able to do this

Really 'cool' Paul! This would be a perfect testbase for Precision Ice and Snow. I'm working on the review right now. Great work.

Nice one! Great Ninak in there...

Nice one Mike! Some great pics in there.

Very nice. I'll get some of that Mig wash too. Using HGW wash now, but am keen on trying this. And those pastels are a nice touch too.

Well it's impossible to get a good photo form this, but here are the cannons. First layer: Alclad steel. Second layer: Gunze clear coat Third layer: AK chipping agent. Fourth layer: Satin black / grey and brown Fifth layer: black areas Then some chipping. Then a wash with oils and next up a little dry brushing.

Preparing for the gun bays and figuring out where the wiring goes. At the back you can see the compressed air bottle that operates the cannon. Funny enough, in our own walk around it appears to be below the cannon.