BlrwestSiR Posted March 7, 2019 Posted March 7, 2019 Ernie, it's not just the traffic but the drivers too. They're all "me first!" in their mentality behind the wheel. It's not fun at all to drive in the GTA anymore. One other reason she's thinking of Barrie is there's a commuter train that goes downtown and then she's a 3 minute subway ride from the station to her office. So she could read or knit on the train ride at least. If she had to drive, it wouldn't be on the table. I remember when I'd drive 50,000 Kms in a year, never mind miles. I also remember the leasing company looking at me and telling me the mileage penalty was more than the buyout. So we sold the car privately and they gave us the difference. 4
harv Posted March 8, 2019 Posted March 8, 2019 He is a dead beat every day ! Oh, th we're other thing.......harv 5
NigelR32 Posted March 8, 2019 Posted March 8, 2019 On 3/5/2019 at 7:35 PM, Clunkmeister said: Ron I think the curvature of the fuselage is all different The blanking panel is in the kit. It's part U1. There are also spare antennae in the kit on sprue P. 5
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 18 minutes ago, NigelR32 said: The blanking panel is in the kit. It's part U1. There are also spare antennae in the kit on sprue P. Nige, you just made my Millenium! 4
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 So here’s what I’ve been doing. I’m bored, so I let the knife start carving away just to see what could happen. Just for kicks and giggles, I took 1/2”off the height of the floor. Hey, I already buggered the seat into an unrecognizable lump, so let’s go for broke on the rest of the model. My goal is to get the top of the main seat frame just about level with the edge of the sidewall. At first, I thought THIS might work. 3/8”. But that was not it. And then, this machine..... But that was not it...... hmmm. I need more time. More thought...... 4
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 Eureka, I think I got it!!! I’ll use this...... And one one of these! And it looks close enough to where I could sell it to the Air Ministry. 7
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 But it seems to have developed a side effect of bare sidewall syndrome. 6
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 Happy happy happy! 5
smitty44 Posted March 8, 2019 Posted March 8, 2019 On 3/6/2019 at 7:37 PM, Clunkmeister said: Just working with kit parts, ha king, glueing, hacking some more... Comfy pillow is just sitting there You can really see what I was talking about here Ernie. While chopping the seat get's it sit low enough in the cockpit there is just no depth to the seat pan of the tweaked seat. I will wait for Roberts seat and just not glue down my canopy glass. 5
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 5 minutes ago, smitty44 said: You can really see what I was talking about here Ernie. While chopping the seat get's it sit low enough in the cockpit there is just no depth to the seat pan of the tweaked seat. I will wait for Roberts seat and just not glue down my canopy glass. Exactly. Or use a comfy pillow. Smitty, one thing I noticed in the panorama of Just Jane was that the truss that supports the pilots seat pedestal is surrounded by some kind of a sheet metal thingy upon which various pipes, hoses, pouched etc are attached to. You can’t see the truss at all, so just lowering the floor should be plenty enough for me. I like to build what I’ll see, the rest I leave to the imagination. There’s a bit of busying up we can do in the cockpit as well, wire bundles, etc, running along the sidewalls, and like Mige showed, a few pipes on the seat itself as well. Not excessive, but there’s a few of them. Im trying not to turn this into a ‘Make Work Project’, so I’m being selective on what we build here. 3
smitty44 Posted March 8, 2019 Posted March 8, 2019 1 minute ago, Clunkmeister said: Exactly. Or use a comfy pillow. Didn't they sit on their chutes, no seat cushion? 3
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 7 minutes ago, smitty44 said: Didn't they sit on their chutes, no seat cushion? In wartime yes, but not sure about the 60s birds... 3
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 9 minutes ago, smitty44 said: October 2019 Ugh, too late for my plans 4
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 16 minutes ago, smitty44 said: You can really see what I was talking about here Ernie. While chopping the seat get's it sit low enough in the cockpit there is just no depth to the seat pan of the tweaked seat. I will wait for Roberts seat and just not glue down my canopy glass. Maybe if I add styrene rod along the length it’ll deepen the look a bit as well. And I haven’t added the front sheet metal yet, so that’ll help some. I’ll try it and see. 4
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 But if you cut the floor down 1/2” it seems about bang on the money. It’ll get you close, anyway. 4
smitty44 Posted March 8, 2019 Posted March 8, 2019 2 minutes ago, Clunkmeister said: But if you cut the floor down 1/2” it seems about bang on the money. It’ll get you close, anyway. Gonna raise mine, and put an Aces II ejection seat in there 5
Administrators Clunkmeister Posted March 8, 2019 Author Administrators Posted March 8, 2019 5 minutes ago, smitty44 said: Gonna raise mine, and put an Aces II ejection seat in there Thought about that, but then I’d have to paint it grey. K-36 might fit better though 4
Jeff Posted March 8, 2019 Posted March 8, 2019 The seat of VRA..... as it was a rescue bird, I would say the seat cushion would be highly appropriate for any post war Lanc..... as the crews used to use a 'seat pack' during war ops, and not needed for post war rescue stuff, I know I'd sure like a cushion..................... I'd say you're on the right track Ernie... 6
Martinnfb Posted March 8, 2019 Posted March 8, 2019 How did this thread got to K-36 ? LOL I am really excited to see all the little changes you are implementing to this already beautiful kit Ernie. Fist cut is the scariest then everything goes red and...wait...what am I talking about? Cheers M. 4
Jeff Posted March 8, 2019 Posted March 8, 2019 Ok Ern , here is your confirmation on the seat cushion..... this is RCAF Lancaster FM 110 404 sqdn, and I'd say it most definitely has the seat cushion...... LAC Photo. 5
Jeff Posted March 8, 2019 Posted March 8, 2019 Same aircraft with the radio altimeter equipment LAC Photo MIKAN No. 3584855 If you look at the top of the pic, it looks like the mid upper turret cover..... doesn't it? 3 1
Jeff Posted March 8, 2019 Posted March 8, 2019 (Library and Archives Canada Photo, MIKAN No. 3584318) Avro Lancaster Shoran equipment. 4
Jeff Posted March 8, 2019 Posted March 8, 2019 (Library and Archives Canada Photo, MIKAN No. 3584029) Avro Lancaster installation and equipment. 3
Jeff Posted March 8, 2019 Posted March 8, 2019 On 3/6/2019 at 7:40 PM, Clunkmeister said: So, I had a gentleman remind me that one of the big differences of a Mk.X is the 1 piece engine side covers. Brit planes had the two piece side covers, so, I feel that this panel line needs to go away. Time to check my crystal ball. Edit: these lines stay. um.................. you sure? I'm not arguing, I'm just wondering..... 4
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now