Administrators Clunkmeister Posted January 16, 2023 Administrators Share Posted January 16, 2023 As my SB2C-4 Helldiver build is drawing to a close, I will enter our GB with a genuine seaplane, a WW1 German patrol plane. I picked this kit up from my fellow intrepid Administrator Fran, who swapped me a GWH Flying Tigers Hawk. So building it is a foregone conclusion. I’m itching for some wood and wire, so this should be a nice break from short run IM. Short run resin… whoop whoop! My build will be one of these two schemes. CDL and wood. Rigging is simple enough, as usual, I’ll use mono line and 1/48 turnbuckles, with EZ Line for control lines. It’ll be a moment or two till I start, as I need to wrap up my Helldiver. The engine and many of the smaller parts are 3D printed, the main components are wire reinforced resin. My heart tells me it needs to be a Polish aircraft, but my head says black crosses, and as no Polish markings are included in this kit, black crosses it is. 12 2 Link to comment Share on other sites More sharing options...
Jeff Posted January 16, 2023 Share Posted January 16, 2023 I'm in 2 Link to comment Share on other sites More sharing options...
GazzaS Posted January 16, 2023 Share Posted January 16, 2023 Cool! 3 Link to comment Share on other sites More sharing options...
Landlubber Mike Posted January 16, 2023 Share Posted January 16, 2023 Oooh nice one! I saw one on eBay not too long ago and was very tempted. Looking forward to seeing this one come along and for your thoughts on the kit. 4 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 16, 2023 Author Administrators Share Posted January 16, 2023 Lukgraph are extremely high end resin kits, and are actually an offshoot of the old Silver Wings brand. As Silver Wings went more into WW2, a couple hardcore rag wing guys broke off to stay true to the original vision, and Lukgraph was born. Much of the kit is the typical super high quality resin with taped together fuselage halves, wire reinforced wings, struts, and landing gear. But here’s where it get’s interesting: no more 200 gazillion little resin parts to assemble an inline 6 cylinder German aircraft engine, instead, Lukgraph now gives you a stunning one piece, fully 3D printed exquisitely detailed engine, with an equally exquisite separate exhaust system. These are simply gorgeous! Just cut free, clean, prime, paint, and add plug wires. 10 Link to comment Share on other sites More sharing options...
GazzaS Posted January 16, 2023 Share Posted January 16, 2023 Go the 3d printing! 4 Link to comment Share on other sites More sharing options...
Peterpools Posted January 16, 2023 Share Posted January 16, 2023 Ernie OMG, fantastic choice for the GB - will be following with a front row seat all the way. 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted January 16, 2023 Share Posted January 16, 2023 Nice choice Ernie, right up your street a biplane, resin and rigging. What’s not to like…….looking forward to it…… 4 Link to comment Share on other sites More sharing options...
DocRob Posted January 16, 2023 Share Posted January 16, 2023 Fantastic choice, I nearly bought one of these. The Polish version is painted grey, if I remember correct, so for me a German wood and linen one would have been the way to go, too. The engine looks great, but painting of the one piece thing could be tempting (reason, why I haven't bought some for my WNW kits). Maybe I change my mind about that, when I see yours painted up. I built one of Lukgraph's 3D printed radials for my Fokker D.VIII and it was extremely nicely done. Cheers Rob 4 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 16, 2023 Author Administrators Share Posted January 16, 2023 13 minutes ago, DocRob said: Fantastic choice, I nearly bought one of these. The Polish version is painted grey, if I remember correct, so for me a German wood and linen one would have been the way to go, too. The engine looks great, but painting of the one piece thing could be tempting (reason, why I haven't bought some for my WNW kits). Maybe I change my mind about that, when I see yours painted up. I built one of Lukgraph's 3D printed radials for my Fokker D.VIII and it was extremely nicely done. Cheers Rob Thanks Rob. I’m not sure, but my eyes may be telling me that those pushrods are waaay overscale, so they may need to go in favor of some fine wire. That alone may help access for painting. 3 Link to comment Share on other sites More sharing options...
DocRob Posted January 16, 2023 Share Posted January 16, 2023 31 minutes ago, Clunkmeister said: Thanks Rob. I’m not sure, but my eyes may be telling me that those pushrods are waaay overscale, so they may need to go in favor of some fine wire. That alone may help access for painting. That's true, I used 0,3mm or 0,5mm nickel tube to enhance my WNW Hansa Brandenburg build. Looked right and no painting needed. Cheers Rob 3 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 16, 2023 Author Administrators Share Posted January 16, 2023 27 minutes ago, DocRob said: That's true, I used 0,3mm or 0,5mm nickel tube to enhance my WNW Hansa Brandenburg build. Looked right and no painting needed. Cheers Rob One thing about 3D printed parts though. You need to be VERY careful how you decide to cut them because they definitely have a grain, and can literally peel, or even shatter if you don’t use a VERY sharp tool and an extremely delicate hand. 5 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 22, 2023 Author Administrators Share Posted January 22, 2023 A bit of work on this today. Some washing of parts, cleaning of the bench, and painting components. This looks like it will be a very nice build. Not too many parts, and like most WW1 models, half the work needed is in the cockpit. 11 Link to comment Share on other sites More sharing options...
Bomber_County Posted January 22, 2023 Share Posted January 22, 2023 I reckon Ernie has caught the speed virus from John………. 2 2 Link to comment Share on other sites More sharing options...
Peterpools Posted January 22, 2023 Share Posted January 22, 2023 Ernie I'm right with Phil and so glad your GB build is now underway. Didn't recognize your bench - it looks so clean, neat and organized. of course, how long it stays that way, is the real question.😉 4 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 22, 2023 Author Administrators Share Posted January 22, 2023 This is more up my alley, so we’ll proceed with happiness and grace 😁 2 2 Link to comment Share on other sites More sharing options...
CANicoll Posted January 22, 2023 Share Posted January 22, 2023 Looking at Ernie's bench, I see that I really need to organize all of the extra bits I have so I know what I have, where. Hmmm. I THINK I know where to put the bins... One of the cool things about this GB is seeing builds of subjects I never knew existed like the Friedrischafen, or knew about, but never saw built, like the Schnellboats. Among the other builds. Not to mention manufactures such as Lukgraph which I knew very little about. VERY cool! Extremely interesting build, Ernie! Can't wait to see how it all comes together but the 3D parts really adds great detail and simplicity as you pointed out. Chris 3 1 Link to comment Share on other sites More sharing options...
HubertB Posted January 23, 2023 Share Posted January 23, 2023 On 1/22/2023 at 2:23 PM, Clunkmeister said: This is more up my alley, so we’ll proceed with happiness and grace 😁 Exclusive : Ernie « proceeding with happiness and grace » on his Friedrichshafen’s build … Hubert 3 2 Link to comment Share on other sites More sharing options...
DocRob Posted January 23, 2023 Share Posted January 23, 2023 Do your magic on the Friedrichshafen Ernie, what a great plane with the wood and cloth finish to replicate. I'm waiting my last wanted kit from WNW to materialize, the Albatros B.II, with a vague similar appearance sans floats. Cheers Rob 5 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 24, 2023 Author Administrators Share Posted January 24, 2023 On 1/22/2023 at 4:53 PM, CANicoll said: Looking at Ernie's bench, I see that I really need to organize all of the extra bits I have so I know what I have, where. Hmmm. I THINK I know where to put the bins... One of the cool things about this GB is seeing builds of subjects I never knew existed like the Friedrischafen, or knew about, but never saw built, like the Schnellboats. Among the other builds. Not to mention manufactures such as Lukgraph which I knew very little about. VERY cool! Extremely interesting build, Ernie! Can't wait to see how it all comes together but the 3D parts really adds great detail and simplicity as you pointed out. Chris Chris, Lukgraph is an outgrowth of Silver Wings, a company we’re all familiar with. Silver Wings went into WW2 stuff, and one of their guys wanted to stay with biplanes, so he started Lukgraph. They have a VERY cool website and, like Silver Wings, are a Polish company. Check it out and check out the esoteric aircraft they give us in 1/32 and 1/48. Here is Lukgraph’s website…. https://lukgraph.pl 3 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 24, 2023 Author Administrators Share Posted January 24, 2023 First we start with a basic cage. Pretty normal stuff for those who build WW1 kits. 8 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 24, 2023 Author Administrators Share Posted January 24, 2023 So far, very thing fits as it should. Which isn’t surprising as Lukgraph has been doing this for years. 7 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 24, 2023 Author Administrators Share Posted January 24, 2023 Check for internal clearances. So far, it all looks really nice. Tonight, we’ll use a bit of oil paint to give it all some grain. 7 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted January 24, 2023 Author Administrators Share Posted January 24, 2023 We’ll give it a day or 10 to dry, and start prepping the engine, the wings, and floats. 10 Link to comment Share on other sites More sharing options...
Peterpools Posted January 24, 2023 Share Posted January 24, 2023 Ernie Nice progress and thanks for posting the photogs on how you are addressing the leather collar fit - looking mighty good. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now