DocRob

Muchas gracias amigos, I'm also very glad to see some paint on the Arado finally and I hope working without pre-shading, what I normally do, will turn out good enough in the end without looking boring. During masking, I realized, that for a long time, maybe forever, I haven't painted a hard edge camo. Maybe I should have prepared better, but I want the Arado off the bench and I take, what I get, if it's not too disgusting . Cheers Rob

Time and motivation are a bit sparse in the moment, but I managed to apply some color onto the Arado. After re-spraying the gloss black of the canopy after sanding, the whole canopy section was masked. The underside of the plane received a coat of RLM 76, followed by a very long masking session, a job, I really don't like. This was followed by a coat of RLM 82 Dunkelgrün (dark green) I decided against pre shading, because of the double coating in the RLM 81 Braunviolett areas. All camo colors are from AK's Real Color range and spray very fine and smooth with the added Mr. Leveling thinner. After drying, I will apply the camo masks, which are pre-cut luckily. Cheers Rob

Hi Mike, I indeed meant the kit decals. With a bit of post shading and weathering they will blend in perfectly, Mike. Cheers Rob

Fantastic result Bill, your Kingfisher is a vivid beauty. I wish, I could lay my hand on that kit, but I may stay with my recently finished 1/350 Kingfishers on board of USS Arizona . Cheers Rob

I was a bit skeptical about your decal strip pre shading method, Mike, but your result is absolutely convincing, like Hubert said. The benefit is a much clearer image of the framework through the 'cloth'. The only area, which doesn't fit perfectly are the decals, which look naturally due to their opacity a bit to prominent . Cheers Rob

Wow Peter, some days off the forum and bang, here is another stunner. Your interior work looks fantastic and spotless clean like ever. Fascinating, how you and some of the guys know all nooks and crannies about the Tamiya Spitfires and Mustangs and I have never built one and have only ONE Tamiya P-51 in my stash. Yeah, I know, I'm an outcast . I wonder, how the Eduard decals work, specially if it's a set of the new ones. For my soon to come P-38J build, I shied away from Eduard and will use a Bombshell set. The luckily few decals, I used for my USS Arizona build had heavy silvering and when I tried to remove the carrier film, the ink got partly lifted. I guess a properly polished surface would have helped. Cheers Rob

Because it's so narrow, it looks more like a water column than a wave and I think that was your intent, Gary. So true, not a Teutonic archetype I am in some respects. I never thought about a German translation for surfer dude, maybe 'Wellenreiter-Kumpel' . Cheers Rob

Thank you Gary, I'm happy to pulled through with the USS Arizona build, but wished, I had the guts for a water base. Cheers Rob

On the back of the package they list the planes for, which the basic markings are supplied. They should at least show this information on their website, imho. Cheers Rob

You'll need a bigger bench, Carl . Cheers Rob

Sorry Gary, it's just me. As a surfer I'm biased, when I see a mounting column of water . Your idea is even cooler. Cheers Rob

For my ZM Horten, I bought a dedicated set of woodgrain decals from Uschi van der Rosten, which I may use for my build. Cheers Rob

There are many different wood stencils out there. I tried a few and had the same prob like Carl and you have to take care, the sprayed wood texture color isn't to thin, running under the template. I prefer the oil color method, you can use it everywhere and have absolut control over grain and color rendition. Cheers Rob

Cool Gary, somehow the old movie tittle of a crap film comes to mind. 'Surf Nazis must Die'. The guys on the bridge look astonishingly calm for the mayor wipeout to come. Definitely something else and your wave looks so real, I gonna pick my board up. Cheers Rob

The last days were full of distractions, but I filled, sanded and re scribed a lot of panel lines, where there was more work popping up after the first coat of primer. The model was then primed again and though it's not perfect (I suck with filling and scribing ), it has to do. Meanwhile the 1ManArmy masks arrived and I decided to give the Arado a camo of RLM 76 for the underside and RLM 81 and 82 for the camo scheme. I will use AK Real colors and have masks for the camouflage. Unfortunately my code letters are not on the sheet and I will use the decals for these, which are looking good. One downside with 1ManArmy is, that you don't see, what you buy. Sure there are the masterful fabricated stencils, but with the included generic markings, you don't know, what they give you. For that reason, I will show, what's in the package. The pic is horrible, but I tried my best to show everything with contrast enhancement, ... Cheers Rob

WNW is the cherry on the pie for sure, Mike. But there are others like Roden (mediocre) and foremost Copper State Model, which are nearly (if not) the same quality level as WNW. The manuals are even better to me, as they show the rigging much better and they are priced reasonably. A Fokker Triplane would be a good choice, equal which breed, because it has very simple rigging and that's what you should look for first thing. That qualifies German single seaters, because of the simple rigging and no flat wire was used. Another cheap German single seater would be Micro Mir Fokker D.VIII. The kit is not very good, but with some extra work it can be made a gem. There are also great 1/48 kits out there in high quality like the CSM offerings or some Eduard kits, especially the newer molds, not a bad starting point. Before starting you should think about a proper rigging method, as there are several with their pros and cons. Cheers Rob

Very nice result, your Spitfire looks fantastic and your log was mouth watering, as I now want one. Cheers Rob

Not as bad as Carl, but I lost the compete PE for my Fore Schnellboot along the metal barrels, clear parts and decals in November. We had a bad rain there and water was seeping in and mushed up the S-boat box. I evacuated the sprues and manual and put the PE onto another stashed box and forgot about it after the incident. Reshuffling my stash some days later, I put some other boxes onto the one and the PE was lost forever, or at least so long, that the USS Arizona was the substitute contribution to the GB. After Arizona was done and I was about to buy a new Schnellboot kit, I found the stuff. Cheers Rob

And that from the man, who sometimes is followed by LS U-boat kits. You are a strange fellow, Carl . Cheers Rob

That's good news, Kevin. The Tempest is coming together with no issues. I'm eager to build my MK. VI soon in BMF, so your build log will be a great template. Cheers Rob

Seems to be the crankcase, which is off, I guess it's separate from the cylinders. Are you sure, the sprues are identical? Cheers Rob

Impressive craftmanship and attention to detail. I envy your patience for going through all this, fantastic. Cheers Rob

This is clearly a winner, what a cool design, it must transport rocket fuel . Cheers Rob

I just had a peek into the box, and yes it's not a big plane, I would have thought, it must be the size of the 1/48 Caudron, being a two seater, but nope. Cheers Rob

Thanks Kevin, the Caudron is small in 1/48, but today I received the even tinier 1/72 Gee Bee shown above. It's only the color, which helps finding it in the display case . Cheers Rob