Wingco57 Posted December 27, 2020 Author Share Posted December 27, 2020 Well the chequers turned out well, not perfect as there were some runners underneath the tape, my fault. But the roundels will cover these. The greatest hurdle has been overcome. After this I hope to do a stick and dip project. 5 Link to comment Share on other sites More sharing options...
ThomasProbert Posted December 27, 2020 Share Posted December 27, 2020 Looks great from where I’m sitting! 2 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted December 27, 2020 Share Posted December 27, 2020 Love the scheme you chose, that's going to look mighty impressive in that scheme. Makes me think my grey one might be a bit dull. You will have earned a shake n bake kit build after this my friend, wonderful indeed and I have learned a lot from your build for mine. Thank you 2 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted December 28, 2020 Share Posted December 28, 2020 Looks really nice to me too. Can't wait to see the next installment. 2 Link to comment Share on other sites More sharing options...
Wingco57 Posted December 28, 2020 Author Share Posted December 28, 2020 Well, here it is. i must say the aftermarket decals I had to source fight me all the way. The roundels are from Extradecal but are thick and prone to chipping. I have had bad experiences with Tamiya decals in the past but in this case they work very well. I hope the side roundels do conform eventually. Fingers crossed. 6 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted December 28, 2020 Share Posted December 28, 2020 My word that looks good! I am sure the decals will settle down. I have not generally had too much issue with them in the past. I am rapidly falling in love with the camouflaged Toom right now! Cheers Anthony 1 Link to comment Share on other sites More sharing options...
Wingco57 Posted December 28, 2020 Author Share Posted December 28, 2020 A camo toom wins handsdown from a dreary grey toom. 1 Link to comment Share on other sites More sharing options...
Kaireckstadt Posted December 29, 2020 Share Posted December 29, 2020 15 hours ago, Wingco57 said: Well, here it is. i must say the aftermarket decals I had to source fight me all the way. The roundels are from Extradecal but are thick and prone to chipping. I have had bad experiences with Tamiya decals in the past but in this case they work very well. I hope the side roundels do conform eventually. Fingers crossed. The camo looks exceptional! I love these 2-tone-liveries! Your conversion is really amazing! Lots of work that pays off! Link to comment Share on other sites More sharing options...
Wingco57 Posted December 30, 2020 Author Share Posted December 30, 2020 Thanks, but using two kits gives a lot if problems. At the moment I am in the “fighting you all the way” phase. And I keep struggling to maintain my motivation. The tailplanes have been fitted so that classic look finally emerges. And the Tamiya nosewheelassembly was easy, just screwing it doen. The Revell main undercarriage wasn’t. 8 1 Link to comment Share on other sites More sharing options...
harv Posted December 30, 2020 Share Posted December 30, 2020 Your doing great ! Looks awesome....harv 3 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted December 30, 2020 Share Posted December 30, 2020 Well from where I am sitting it looks pretty darn awesome....errrrr I mean, no it doesn't. Give in and send it to me... Seriously though mate, we dont see your struggles, only the results of your struggles. She really looks the part now with the tailplanes and decals on. You are nailing it buddy. Dont give in just yet, wait until the clearcoat is on and it's on your shelf...then give in! Or send it to me...either way is a good outcome 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted December 31, 2020 Share Posted December 31, 2020 She looks fantastic. It wouldn't know it two different kits cut and blended together. Carl 3 Link to comment Share on other sites More sharing options...
Wingco57 Posted January 2, 2021 Author Share Posted January 2, 2021 Flaps are on, have to do something to keep motivated. 8 Link to comment Share on other sites More sharing options...
ThomasProbert Posted January 2, 2021 Share Posted January 2, 2021 Every little detail helps move a project along... there can’t be that much more to go now..? 2 Link to comment Share on other sites More sharing options...
Wingco57 Posted January 4, 2021 Author Share Posted January 4, 2021 Plenty of work to do in the cockpit, canopy and underwing stores. Not to mention the lack of suitable serial decals for the fuselage and underwing. I have most of them apart from the letter “V”. That is holding up progress. I wanted to fit the tailpipes but an earlier oversight came back to haunt me. Before I fitted the Revell tail I forgot to cut away the lower fuselage tabs. Although I had managed to trim them back with great difficulty through the tailpipe opening it was not enough to use the Tamiya pipes. What to do? In the end I improvised by rolling up pieces of black sandpaper and that did the trick. So there is an illusion of depth. They say modelling is f...u....n..... 7 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted January 4, 2021 Share Posted January 4, 2021 Looks like the "fun" bit was very much worth it. Carl 4 Link to comment Share on other sites More sharing options...
Kaireckstadt Posted January 4, 2021 Share Posted January 4, 2021 1 hour ago, BlrwestSiR said: Looks like the "fun" bit was very much worth it. Carl I can only underline that! Awesome build! 4 Link to comment Share on other sites More sharing options...
Administrators JeroenPeters Posted January 5, 2021 Administrators Share Posted January 5, 2021 I read the elbow grease is on sale at Kruidvat 2 4 Link to comment Share on other sites More sharing options...
Wingco57 Posted January 5, 2021 Author Share Posted January 5, 2021 Sold out after my last visit. Regarding the burnercans being slightly undersize on my build I did that intentionally but it is relatively easy to widen the openings. I decided not to go that extra mile after all the hacking and cutting and didn't want too much detail lost. 5 Link to comment Share on other sites More sharing options...
Wingco57 Posted January 5, 2021 Author Share Posted January 5, 2021 Fitted the divebrake actuators which still need to be painted. The undercarriage doors and actuators and the auxiliary doors. Some touching up here and there and next stage is finalizing the serial decals si the underwing stores can be fitted. The cockpit will be one of the last things to tackle as Tamiya chose the most difficult way by providing separate canopy and frame parts. Hiding the seams will be a challenge. One of many in this build 4 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted January 5, 2021 Share Posted January 5, 2021 2 hours ago, Wingco57 said: Hiding the seams will be a challenge. Cees, on my last couple Tamiya F-4 builds I hid the seam by painting a thin strip of tan along the clear parts. This reproduces the look of the sealant that's used on the 1/1 canopies. Carl 7 1 Link to comment Share on other sites More sharing options...
woody37 Posted January 6, 2021 Share Posted January 6, 2021 Last time I dropped in, there was no paint on so this has come along superbly Cees, it looks gorgeous. I'd say you are winning big time :) Cheers Neil 3 Link to comment Share on other sites More sharing options...
Kaireckstadt Posted January 6, 2021 Share Posted January 6, 2021 On 1/5/2021 at 7:46 PM, Wingco57 said: Fitted the divebrake actuators which still need to be painted. The undercarriage doors and actuators and the auxiliary doors. Some touching up here and there and next stage is finalizing the serial decals si the underwing stores can be fitted. The cockpit will be one of the last things to tackle as Tamiya chose the most difficult way by providing separate canopy and frame parts. Hiding the seams will be a challenge. One of many in this build Great job on the camo and the installed components! With all the problems you already solved during the build you will also solve the one with the canopies. Looking forward to seeing your progress! 5 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted January 7, 2021 Share Posted January 7, 2021 Yep, brilliant work there Cees..... there is nothing not to love with this build! I will be sad to see it finish as I get a lot from each update. I am sure you will be pleased though Great work buddy! 4 Link to comment Share on other sites More sharing options...
Wingco57 Posted January 8, 2021 Author Share Posted January 8, 2021 Thanks Anthony, More and more things are getting fitted and that is a lot of fun. I dread doing the walkways though as they are complicated with radiating red striping and the incomplete serials, yet. Ejection seats are also being worked on. Getting there in the end. But I have already started on a Tamiya P-51D Musting which will be finished in Dutch colours. Should not get distracted though 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now