Spitfire Posted October 14, 2022 Share Posted October 14, 2022 25 minutes ago, nmayhew said: Sorry for your decal woes but… masks or HGW wet transfers for main markings; HGW will also cover you for wet transfer stencils i would only consider decals when there is absolutely no alternative I'm with you on that one, painted on markings and HGW wet decals for me, even though they both can go wrong at times. Cheers Dennis 1 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 14, 2022 Author Share Posted October 14, 2022 12 hours ago, GazzaS said: Honestly... I hate Trumpeter. I can't even see a blemish on your last pic. Thanks Gaz, only trouble is once you know it’s there …….I must admit this maybe my last Trumpeter as well, I tried their AFV and wasn’t impressed either…. 2 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 14, 2022 Author Share Posted October 14, 2022 12 hours ago, DocRob said: Sorry to hear about your decal probs Phil. Weathering might enhance the issue, setteling in the cracks. I believe, 1ManArmy has a set of masks for markings AND stencils in their portfolio. Cheers Rob Thanks Rob, I was thinking the same, any colour other than white will make it standout. I need to look into stencils…..thanks for the recommendation… 2 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 14, 2022 Author Share Posted October 14, 2022 4 hours ago, nmayhew said: Sorry for your decal woes but… masks or HGW wet transfers for main markings; HGW will also cover you for wet transfer stencils i would only consider decals when there is absolutely no alternative Thanks, I definitely going to look into stencils, as for this Wildcat, I’m going to live with the blemishes and finish it up………it’s either that or the SOD and I have two 32nd’s languishing there already……… 2 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 14, 2022 Author Share Posted October 14, 2022 3 hours ago, Spitfire said: I'm with you on that one, painted on markings and HGW wet decals for me, even though they both can go wrong at times. Cheers Dennis Thanks Dennis, definitely looking into your suggestions, this part of the build does tend to bite me to many times……. 1 Link to comment Share on other sites More sharing options...
KevinM Posted October 18, 2022 Share Posted October 18, 2022 On 10/13/2022 at 12:21 PM, Bomber_County said: Thanks Peter, there are a lot of curves for it adhere to…….this is the outcome, this is the worst one…….the other side even though it was in three parts has aligned almost perfectly……..not sure what to do now, perhaps something weathering may hit it back….. Phil it looks good to me but I am mostly mediocre on most of my builds quantity over quality I guess 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 18, 2022 Author Share Posted October 18, 2022 Thanks Kevin, having an engineering background I do get hung up on the smallest of quality issues which increases the build time ……..this one I will live though……..still bugs me…………. 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 19, 2022 Author Share Posted October 19, 2022 So during the working week I average about 20 minutes benchtime each evening, therefore the Wildcat is creeping towards the finish line, slowly…….. 5 2 Link to comment Share on other sites More sharing options...
harv Posted October 19, 2022 Share Posted October 19, 2022 Looks great !....harv 1 Link to comment Share on other sites More sharing options...
nmayhew Posted October 19, 2022 Share Posted October 19, 2022 11 minutes ago, Bomber_County said: So during the working week I average about 20 minutes benchtime each evening, therefore the Wildcat is creeping towards the finish line, slowly…….. I take 20mins just to remember where I left off lol 4 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 19, 2022 Author Share Posted October 19, 2022 3 hours ago, harv said: Looks great !....harv Thanks Harv, much appreciated…… 2 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 19, 2022 Author Share Posted October 19, 2022 3 hours ago, nmayhew said: I take 20mins just to remember where I left off lol You and me both, I have a made some howlers when trying to squeeze in some bench time…… 3 Link to comment Share on other sites More sharing options...
Peterpools Posted October 20, 2022 Share Posted October 20, 2022 Phil Looking so good and even short work sessions are better then known. MY problem is not knowing where I left off from the previous work session but where I just put down the part, I'm working on ... loads of senior moments 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 20, 2022 Author Share Posted October 20, 2022 40 minutes ago, Peterpools said: Phil Looking so good and even short work sessions are better then known. MY problem is not knowing where I left off from the previous work session but where I just put down the part, I'm working on ... loads of senior moments Thanks Peter, much appreciated, I try and make sure the bench is tidy and any parts being worked on are placed in glass / plastic trays when finishing up a session …..try is the idea…….as I’ve said I have made some real howlers when grabbing brief time……. 1 Link to comment Share on other sites More sharing options...
Peterpools Posted October 22, 2022 Share Posted October 22, 2022 Phil I'm with you and spend time at the end of each session cleaning and straightening up. I just feel better when it's time to hit the bench running, that almost everything is neat, clean and in its place. My big 'wall' is putting a part down and then in the next minute or so, I can't find it - loads of senior moments these days. 1 Link to comment Share on other sites More sharing options...
GazzaS Posted October 22, 2022 Share Posted October 22, 2022 Phil, That looks great! All of those micro sessions pay off. On my workdays, I'm usually too tired to even think about models. 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 22, 2022 Author Share Posted October 22, 2022 1 hour ago, GazzaS said: Phil, That looks great! All of those micro sessions pay off. On my workdays, I'm usually too tired to even think about models. Thanks Gaz, it can be frustrating though, so have plan building with one eye on the clock…….. 2 Link to comment Share on other sites More sharing options...
Irishman1 Posted October 22, 2022 Share Posted October 22, 2022 Looks great!! Any work beats no work 1 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 23, 2022 Author Share Posted October 23, 2022 12 hours ago, Irishman1 said: Looks great!! Any work beats no work Thanks Mike, it’s getting close to finishing….. 2 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 23, 2022 Author Share Posted October 23, 2022 It’s DONE……..pictures to follow later….. 2 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now