CANicoll Posted January 21, 2023 Share Posted January 21, 2023 Carl, Wow, Bold heads. I'm just blown away - The visual appeal is AMAZING and those tubes look fantastic. The level of detail you have here is really impressive. Wow! 5 1 Link to comment Share on other sites More sharing options...
KevinM Posted January 21, 2023 Share Posted January 21, 2023 And when you start to thrash them Carl will be even better. 5 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 4, 2023 Author Share Posted February 4, 2023 It's been a while but I finally got some more work done on the Vosper. It's a bit random as I'm sort of jumping around. On the cabin walls, I started removing some of the moulded on details. Then I added the PE replacement bits. There's a bunch more to add to this, that's just the foundation. On the rear cabin wall, it's more of the same. There's a bunch of interior detail to add too. There are several conduit boxes and you have to add rings to the openings for the cables. Then I jumped to the torpedo cradles. Here's the bits that make them up. Partway through putting them together. I have the say, the engineering really impresses me on these subassemblies. If you've folded them together correctly, they hold together with just a slight bit of pressure which allows for easier CA application. One assembled cradle. 11 1 Link to comment Share on other sites More sharing options...
Peterpools Posted February 4, 2023 Share Posted February 4, 2023 Carl Glad to see you back working on the Vosper. The PE details look fantastic and some mighty fine work on the PE torpedo cradles; you absolutely have the touch. 3 1 Link to comment Share on other sites More sharing options...
DocRob Posted February 4, 2023 Share Posted February 4, 2023 Nice PE work, Carl, we are sitting in the same boat, literally . Cheers Rob 2 1 3 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 4, 2023 Author Share Posted February 4, 2023 6 hours ago, Peterpools said: Carl Glad to see you back working on the Vosper. The PE details look fantastic and some mighty fine work on the PE torpedo cradles; you absolutely have the touch. Thanks Peter. The PE really is going together much better than I thought it would. 6 hours ago, DocRob said: Nice PE work, Carl, we are sitting in the same boat, literally . Cheers Rob Rob, you've got the bigger challenge with the Arizona as the base kit is a lot cruder than what I'm dealing with. 6 Link to comment Share on other sites More sharing options...
KevinM Posted February 5, 2023 Share Posted February 5, 2023 Carl after I got through my first four cradles a little change for the next four and they were a snap,yours are starting right off looking great! 5 1 Link to comment Share on other sites More sharing options...
Bomber_County Posted February 5, 2023 Share Posted February 5, 2023 Carl , looking great. So wish Griffon had done an update for the Elco. Having to scratch build everything…….update on the Elco later today…… 5 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 5, 2023 Author Share Posted February 5, 2023 (edited) I finally found some challenging bits to make on this kit. The deck hatches are a multi layer assembly. There's an outer edge and an inner one to each one. They then all require hinges to be made. Each one is three parts. You have to roll the hinge around a piece of copper wire and then if you've done it right, it'll work. One done, 7 to go. Still can't believe I got it done, it's so tiny. Last bit for now is an overhead thingy and the conduit. Edited February 5, 2023 by BlrwestSiR Fix typo 10 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 6, 2023 Author Share Posted February 6, 2023 I got the second hinge made so I installed it on the deck. I then added the hatch cover. Success! It even opens which is a bonus. 10 1 1 Link to comment Share on other sites More sharing options...
Peterpools Posted February 6, 2023 Share Posted February 6, 2023 Carl BRILLIANT! Awesome work on the PE hinges - looks fantastic and they even work - some mighty fine work. 2 1 Link to comment Share on other sites More sharing options...
RockieYarwood Posted February 7, 2023 Share Posted February 7, 2023 Awesome work on the photo etch Carl! 3 1 Link to comment Share on other sites More sharing options...
GazzaS Posted February 8, 2023 Share Posted February 8, 2023 Nice hatches! 3 1 Link to comment Share on other sites More sharing options...
CANicoll Posted February 10, 2023 Share Posted February 10, 2023 Carl, I'm sorry, this whole thing just blows my mind. The level of detail and the minute-ness is something my head just cannot comprehend. Wow. HATCHES THAT WORK??? Those boxes with the cable rings??? Next you are going to say the bloody thing floats and the guns fire! 2 1 5 Link to comment Share on other sites More sharing options...
Peterpools Posted February 10, 2023 Share Posted February 10, 2023 Chris Carl surely has the gift of working with PE as Rob does. Just way too difficult for me at this stage of the game. 1 2 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 12, 2023 Author Share Posted February 12, 2023 Thanks guys! There's more in the PE stuff than there is with the plastic in this kit. Some of the working stuff is just silliness like those hatch hinges. Here's another example. Working cabinet drawers. 6 1 Link to comment Share on other sites More sharing options...
KevinM Posted February 12, 2023 Share Posted February 12, 2023 Carl do you ever solder?I P/U up a small torch from work like the crackheads probably use in case I need to do mast or some bigger stuff.I have to say though making working hinges 🤪 4 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 13, 2023 Author Share Posted February 13, 2023 Kevin, I used to solder stuff all the time in my late teens and early twenties when I was big into RC cars. Got really good at it but then stopped. Since then, every time I try now it's a blobby mess if stuff even sticks together. I have a couple small irons I could try and see if anything works. 3 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted February 13, 2023 Share Posted February 13, 2023 This is some serious metal work Carl. Absolutely fascinating, to see it all come together with an ease. 2 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 13, 2023 Author Share Posted February 13, 2023 I finally started adding the PE bits to the cabin walls. Painting it is going to be fun too but at least I've figured a colour out now. 7 Link to comment Share on other sites More sharing options...
GazzaS Posted February 13, 2023 Share Posted February 13, 2023 Wow! Very sharp! 3 1 Link to comment Share on other sites More sharing options...
DocRob Posted February 13, 2023 Share Posted February 13, 2023 Do you get brass blindness like me sometimes Carl? When I work for hours on PE with the magnifier under good lighting, I got caught by the permanent glare and have difficulties to focus . Time for a beer then and some music on the turntable. Cheers Rob 3 1 Link to comment Share on other sites More sharing options...
Peterpools Posted February 13, 2023 Share Posted February 13, 2023 Carl Amazing PE work and now operating draws. Too bad they are so small, as they would be a good place for the secret stash. Can't wait to see all of these assemblies painted - going to look tremendous. 2 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 14, 2023 Author Share Posted February 14, 2023 16 hours ago, DocRob said: Do you get brass blindness like me sometimes Carl? When I work for hours on PE with the magnifier under good lighting, I got caught by the permanent glare and have difficulties to focus . Time for a beer then and some music on the turntable. Cheers Rob Rob, I do sometimes get some eye strain from working too long. Mostly I find it happening when I'm painting lots of white the glare gets bad. 3 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted February 14, 2023 Author Share Posted February 14, 2023 11 hours ago, Peterpools said: Carl Amazing PE work and now operating draws. Too bad they are so small, as they would be a good place for the secret stash. Can't wait to see all of these assemblies painted - going to look tremendous. Thanks Peter. I'm still amazed that it goes together so well. And yes, they'd need to be bigger to hide my stash in. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now