Jeff Posted March 17 Share Posted March 17 19 hours ago, BlrwestSiR said: Peter, I picked up some PE guides a few years ago. They're to mark the centre of a tube precisely for drilling them out. Let me see if I can find them. I haven't used them so can't say how easy they would be to use. Carl, like Peter, I too would be interested in having a look at these too. My usual way is like Rob’s , I out a nee blade in my knife and under a good light try to locate the center with the old Mark 1 eyeball. ‘Most’ of the time I’m successful enough to be passable. But if there is a fool proof way out there , it bears some investigation. Thanks buddy Jeff 4 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 17 Author Share Posted March 17 Jeff, Peter I'll try to find them and let you know who made them. If I recall, they're a Japanese company but a quick search around my bench and I can't find them. I did find B-25 parts, Tse Tse Mossie parts and Kingfisher parts though. 2 3 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 17 Author Share Posted March 17 Meantime, the Me 262 is getting closer to finished. I started on the decals and that went sideways. The stencils started to curl up and the silvering was absolutely nasty. So I ended up removing most of the them. I had to do some paint touch-ups as a result. I'm probably going to just leave it at this point. I may look at the 1 Man Army stencils if I decide to revisit this. I also added the landing gear doors and the drop tanks. Lastly, I removed the masking and fitted the canopies. Well, test fitted them anyways. They're going to be in the open position. 9 Link to comment Share on other sites More sharing options...
DocRob Posted March 17 Share Posted March 17 Your 262 looks fantastic Carl. Bummer with the decals, were these the original Revell ones. I wonder, because I thought they were of relatively good quality. 1ManArmy masks on German planes are a lot of work, because of the many used colors and walkways, which I experienced with my Arado 234. When I build my 262, I will give the HGW wet transfers a (last?) shot. Cheers Rob 6 Link to comment Share on other sites More sharing options...
Spitfire Posted March 17 Share Posted March 17 That is most impressive mottle work, looks great. Cheers Dennis 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 17 Author Share Posted March 17 Rob, they were the kit decals which are by Cartograf. Not sure if I got a bad sheet but I'm going to use some artistic license and leave it as is. I was also getting a reaction with the decal softener in that the paint was melting. That was a first for me. So rather than risking things I'm calling the decals done. 6 Link to comment Share on other sites More sharing options...
DocRob Posted March 18 Share Posted March 18 Thanks Carl, I got another question considering the gun barrels, I never saw them protruding on a 262 like with yours, secret weapon? sniper version? Cheers Rob 4 1 Link to comment Share on other sites More sharing options...
Peterpools Posted March 18 Share Posted March 18 Carl Looking so good and having to deal with decal issues right at the end of the build. Agreed, just leave the decals now as is, and bring her across the line. 4 Link to comment Share on other sites More sharing options...
Martinnfb Posted March 18 Share Posted March 18 Carl with his date, exploring the possibility of the long blast tube installation. 1 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 18 Author Share Posted March 18 6 hours ago, DocRob said: Thanks Carl, I got another question considering the gun barrels, I never saw them protruding on a 262 like with yours, secret weapon? sniper version? Cheers Rob Rob, this particular aircraft had the lower Mk108 cannon replaced with a pair of Mk103s. The Mk103 has a much longer barrel so they stuck out. I can't find any reason why they did it but I thought it looked different enough to do. 6 Link to comment Share on other sites More sharing options...
JohnB Posted March 18 Share Posted March 18 Nice work Carl!!! Your '262 is really looking good! 3 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted March 24 Share Posted March 24 To the top 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 29 Author Share Posted March 29 Small bit of progress. Almost tossed the model but finally got the canopies in place. Then the fun part, adding the antennae. Somehow this went easier than the canopies. Go figure. 8 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted March 30 Share Posted March 30 Corsair is landing a helping hand, or wing 3 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 30 Author Share Posted March 30 1 hour ago, Martinnfb said: Corsair is landing a helping hand, or wing Actually both outer wings are off, one with a broken spar which I'll need to fix which is why she's stalled. 1 4 Link to comment Share on other sites More sharing options...
Peterpools Posted March 31 Share Posted March 31 Carl Nice progress for sure. I would have also guessed the antenna would have been harder to install then the canopy ... go figure. In either case, they look superb. 3 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 31 Author Share Posted March 31 7 hours ago, Peterpools said: Carl Nice progress for sure. I would have also guessed the antenna would have been harder to install then the canopy ... go figure. In either case, they look superb. Peter, I know. Who would have thought. The antennae were a single drop of Tamiya Extra Thin on the arm, then stuck the antenna on and a quick alignment and done. The canopies couldn't decide if they wanted to attach to the coaming or the edge of the fuselage plus then I had to hold them while the CA set and they kept moving around. Either way they're all on and I've only got a few small bits left. 5 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted April 12 Author Share Posted April 12 Time to finally call this one done. I added the last few parts to the 262 which was mostly the antenna and that was it. The bench is still a work in progress so I'll try to take some better pics soon. Maybe on the weekend. 8 2 Link to comment Share on other sites More sharing options...
DocRob Posted April 12 Share Posted April 12 A true beauty, Carl. The mottling came out great and the markings blend in beautifully. The long barrels and the lack of two tone camo on the wing make her look positively different. Makes me want to start mine, but this is for later. Cheers Rob 3 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted April 12 Share Posted April 12 Lovely work Carl, clean and smooth. Cheers Martin 2 1 Link to comment Share on other sites More sharing options...
Landlubber Mike Posted April 12 Share Posted April 12 Wow Carl, that came out great! Your paint work is fantastic, really well done! 3 1 Link to comment Share on other sites More sharing options...
Jeff Posted April 12 Share Posted April 12 Outstanding as always , Carl. Looks perfect Jeff 2 1 Link to comment Share on other sites More sharing options...
Peterpools Posted April 13 Share Posted April 13 Carl WOW, what a beauty; clean, crisp, nicely detailed - especially the antennas; a brilliant build.🏆 1 1 Link to comment Share on other sites More sharing options...
ScottsGT Posted April 14 Share Posted April 14 Love it Carl! I picked up a set of the red 10 decals for my kit. 1 1 Link to comment Share on other sites More sharing options...
Spitfire Posted April 14 Share Posted April 14 Impressive Cheers Dennis 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now