PanzerWomble Posted January 31 Share Posted January 31 Awaiting parts for the frightening and doing some "completions"....everything bar the belts and some touching up and then zip it up . interior colour is toned down XF71 Cockpit Green from Tamiya, as it always seems very dark for the scale , although is not a bad match overall . I like the Yahu panel I bought a year ago , although so far inside it won't be seen . "Wiring" is 100% made up . 7 Link to comment Share on other sites More sharing options...
intheway Posted February 15 Share Posted February 15 Decals ongoing on the Hasegawa 1/32 Ju 87g Stuka Kanonenvogel. 5 Link to comment Share on other sites More sharing options...
ScottsGT Posted February 15 Share Posted February 15 56 minutes ago, intheway said: Decals ongoing on the Hasegawa 1/32 Ju 87g Stuka Kanonenvogel. Nice! Just picked this kit up myself and I think it might be next. 3 Link to comment Share on other sites More sharing options...
Bomber_County Posted February 15 Share Posted February 15 12 hours ago, intheway said: Decals ongoing on the Hasegawa 1/32 Ju 87g Stuka Kanonenvogel. Please, more pics……. 2 Link to comment Share on other sites More sharing options...
DocRob Posted February 15 Share Posted February 15 On 1/24/2024 at 7:38 PM, Martinnfb said: Years ago I collected parts from my scrap to build 109. It ended up being early G. The reason for this was to show to my friend a former member here Dale, how to use various techniques and pass him as much knowledge as I could. We were sitting in front of Skype for days and playing with plastic, becoming close friends. He’s not with us anymore and I miss him and going to finish this. Would be a great tribute to Dale to finish that bird, Martin. He was a great guy and I can imagine some intense skyping with him. Cheers Rob 2 2 Link to comment Share on other sites More sharing options...
intheway Posted February 16 Share Posted February 16 12 hours ago, Bomber_County said: Please, more pics……. Here's a few more. 10 Link to comment Share on other sites More sharing options...
AlanG Posted March 2 Share Posted March 2 Finally getting back to my Me262 build after an age away from it. Lost mojo, intense work things and life issues to resolve. Started painting the rear section of the engine and now painted the pipework i scratch built. Just a few more things to paint then it's time to glue all together and get on with the wheel bay build 9 Link to comment Share on other sites More sharing options...
DRUMS01 Posted March 2 Share Posted March 2 Just starting to break the box open on this one. Also got the Quinta Studios cockpit and pilot figures. I'm not positive if it will be otherwise OOB or if it's going to be converted to an Erickson fire fighting crane. There is a file available for a 3d printer and decals, but I would have to find somebody with a printer as I do not have one. The civilian colors really make this thing stand out in a major way. Ben 7 Link to comment Share on other sites More sharing options...
KevinM Posted March 2 Share Posted March 2 Sharnhorst 9 Link to comment Share on other sites More sharing options...
Peterpools Posted March 6 Share Posted March 6 Kev Looking mighty good. patience of a saint for such detail work 4 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 7 Share Posted March 7 Great progress on your big Sharnhorst, Kevin! 3 1 Link to comment Share on other sites More sharing options...
KevinM Posted March 7 Share Posted March 7 3 hours ago, Peterpools said: Kev Looking mighty good. patience of a saint for such detail work Thanks Peter working over some motor launches ATTM how far do I detail? 39 minutes ago, belugawhaleman said: Great progress on your big Sharnhorst, Kevin! Yeah Paul about to pull out the Paduka wood tonight and start the base. 4 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 12 Share Posted March 12 Been working on Takom's SMK...... Got the hull and wheels mostly done. Only problem was the grab handles on the hatches didn't fit.....the location holes had to be drilled out larger. 8 Link to comment Share on other sites More sharing options...
FullArmor Posted March 13 Share Posted March 13 8 hours ago, belugawhaleman said: Been working on Takom's SMK...... Got the hull and wheels mostly done. Only problem was the grab handles on the hatches didn't fit.....the location holes had to be drilled out larger. Looking great! Is this multiturret tank? Please share item number. 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 13 Share Posted March 13 7 hours ago, FullArmor said: Looking great! Is this multiturret tank? Please share item number. Yes, it's a twin turret tank. Takom #2112 https://www.scalemates.com/kits/takom-2112-smk--1140874 1 1 Link to comment Share on other sites More sharing options...
FullArmor Posted March 13 Share Posted March 13 14 hours ago, belugawhaleman said: Been working on Takom's SMK...... Got the hull and wheels mostly done. Only problem was the grab handles on the hatches didn't fit.....the location holes had to be drilled out larger. Friul tracks on this one? This item screams friul tracks(exposed/create natural sag). 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 13 Share Posted March 13 1 hour ago, FullArmor said: Friul tracks on this one? This item screams friul tracks(exposed/create natural sag). Yes, i already bought some friul tracks for this kit, but the kits link & length tracks are very good. 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 19 Share Posted March 19 More work on the SMK Construction work mostly done.....painting in near future. Some minor putty needed in a few places, but otherwise went together well. Tiny transparent vision blocks a pain to put in place. I will not be using the kit tracks, but will instead be using Friulmodel tracks. A big, odd-looking, tank this one! . 4 Link to comment Share on other sites More sharing options...
Peterpools Posted March 20 Share Posted March 20 20 hours ago, belugawhaleman said: More work on the SMK Construction work mostly done.....painting in near future. Some minor putty needed in a few places, but otherwise went together well. Tiny transparent vision blocks a pain to put in place. I will not be using the kit tracks, but will instead be using Friulmodel tracks. A big, odd-looking, tank this one! . Very nice progress and looking mighty good. 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 20 Share Posted March 20 Well, disaster today.....on the SMK. While trying to glue on a part with ca. An entire capful of CA dropped On the model destroying the kit.....As I See it this kit can no longer be finished. I see no way to remove the CA spilled all over the back of this Model. Perhaps the undamaged parts, wheels, turrets etc can be used on a new kit.......Mad As Hell! Addendum: I just ordered another SMK kit from Scalehobbyist. Oh well....Hell.....Tomorrow is another day. By the way ScaleHobbyist has these for $46.00...A good price, I was lucky to find one. 3 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted March 21 Share Posted March 21 Paul, sorry to hear about the CA spill. Any chance you can use debonder to clean it up? The CA shouldn't have done any damage to the plastic unless it kicked off thermally. I had that happen once when I put a dropper full of CA accelerator into the CA bottle by accident. The bottle got really hot and smoked. Then it hardened into a solid lump. 1 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted March 21 Share Posted March 21 23 minutes ago, BlrwestSiR said: Paul, sorry to hear about the CA spill. Any chance you can use debonder to clean it up? The CA shouldn't have done any damage to the plastic unless it kicked off thermally. I had that happen once when I put a dropper full of CA accelerator into the CA bottle by accident. The bottle got really hot and smoked. Then it hardened into a solid lump. Thanks Carl. No, I don't think using debonder will be worth the effort. Plus, I did something perhaps really stupid by spraying it with accelerator after Trying to wipe the glue off.... It did seem to remove some glue at first before hardening into a real mess. Kind of serves me right as I was getting frustrated and irritable trying to glue the engine screen shown in my picture. I should have put the model aside....cooled down a bit. Instead I became careless, an invitation for accidents. Anyway, I ordered a new kit at a good price and I'll try again. Until then, I'll start a new kit. I'm looking at Takom's Little G13 Swiss Hetzer. 3 Link to comment Share on other sites More sharing options...
DocRob Posted March 21 Share Posted March 21 8 hours ago, belugawhaleman said: Well, disaster today.....on the SMK. Well, it doesn´t look too bad with the CA on, Paul. You might spray some primer on top, to see, how it looks afterwards. There are myriads of possibilities to hide the section later with a tarpaulin, figures, equipment, snow, camo netting, ... Cheers Rob 3 Link to comment Share on other sites More sharing options...
FullArmor Posted March 21 Share Posted March 21 2 hours ago, DocRob said: Well, it doesn´t look too bad with the CA on, Paul. You might spray some primer on top, to see, how it looks afterwards. There are myriads of possibilities to hide the section later with a tarpaulin, figures, equipment, snow, camo netting, ... Cheers Rob Or use this hull as diorama damaged part.🧐 3 Link to comment Share on other sites More sharing options...
mark31 Posted March 21 Share Posted March 21 On 3/2/2024 at 11:29 PM, DRUMS01 said: Just starting to break the box open on this one. Also got the Quinta Studios cockpit and pilot figures. I'm not positive if it will be otherwise OOB or if it's going to be converted to an Erickson fire fighting crane. There is a file available for a 3d printer and decals, but I would have to find somebody with a printer as I do not have one. The civilian colors really make this thing stand out in a major way. Ben Where didt you found the files for the conversion? Mark 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now