Jump to content
Playing in the Sandbox Group Build Sept 1, 2024 - Jn 1, 2025

'Skeletal' Fokker D.VII


Recommended Posts

Hi all,
I thought you might like to see my 18th 1:32 scale build - the German Fokker D.VII fighter.  The major airframe components are 3D printed from the ‘Shapeways’ web site. The airframe structural components were designed by ‘Aviattic’ and engine parts by ‘Bob Monroe’. Other components for the model were ‘donated’ from the ‘Wingnut Wing’ kit of the Fokker D.VII (OAW built) (Kit No: 32030).

This model, with associated figures, will eventually be part of a dual Fokker D.VII display. 

I know I don't often reply to your generous comments, but rest assured they are very much appreciated, 

Mike 

 

The basic list of modifications and additions to the model are as follows: 

‘Taurus Models’ engine intake manifold lock rings (3211),
‘Taurus Models’ engine fuel priming cups (3219),
‘Taurus Models’ engine complete timing gear - conical valve springs (3209),
‘Eduard’ Swordfish hinge and panel set (32204),
‘RB Productions’ British wire terminals (RB-P32013).
Spark plugs.
Cylinder fuel primers.
Valve springs.
Ignition lead support tubes.
Gun synchronization mechanism.
Ignition leads.
Oil reservoir sight glass.
Hydraulic pipes.
Intake manifold lock rings.
Sump oil tube.
‘Flugzeugwerke’ (Bob Monroe) (printed by ‘Shapeways’)
            Mercedes D.III Oil Pump,
            Mercedes D.IIIa Cylinders (hollow),
            Mercedes D.IIIa Crankcase and engine block,
            German Aircraft Magnetos,
            Mercedes Cylinder clamps,
‘Aviattic’ (printed by ‘Shapeways’)
            Rear fuselage frame.
            Tail plane.
            Rudder.
            Elevator.
            Ailerons.
            Fin.
            Upper wing (3 sections) (scratch bracing tapes, leading edge ‘saw tooth’ fairings).
            Lower wing (two sections) (scratch bracing tapes, leading edge ‘saw tooth’ fairings).
            Tail skid (with scratch made suspension cables and springs).
Wings leading edge ‘stacking pads’.
Rear fuselage decking panel.
Cockpit padded surround.
‘Aviattic’ Fokker seat.
Undercarriage assembly – scratch built including brass struts.
Fuel, oil and coolant pipes,
Engine controls – throttle, magneto, alternator, spark advance, hand throttle.
‘REXx exhaust.
‘Proper Plane’ Heine propeller (wood).
‘GasPatch’ Spandau machine guns.
Gun installations.
Cockpit control cables – rudder, ailerons and elevator.
Cockpit cross bracing lines.
Gun firing cables.
Gun synchronization mechanism.
Engine controls.
Instrument leads/cables.
Fuel pressure pump pipe.
Seat harness.
Rigging points.
External flight control lines.
‘Steve Robson’ handmade wheels and tyres.
Photo-etch radiator.
Radiator shutter and control cable/pulley.
All internal cross bracing cables.
Aileron control cables with associated pulleys.


As usual I've created a downloadable build log in Adobe PDF format, for those who might want to refer to it for reference or build details. It contains full step by step descriptions of the model build, its modifications/changes and is also supported with illustrations and photographs. If viewed in Adobe Reader, each build log has book marked chapters/headings for easier navigation through the log.

My model website has the gallery page, so to view any model, go to the gallery and select it.  If it has a PDF build log, it will be available to download using the 'PDF' icon on that models photo's page. For any photograph, just click the photo to enlarge or reduce the viewing size.


http://igavh2.xara.hosting
 

3D1.jpg

3D2.jpg

3D3.jpg 

3D4.jpg 

3D5.jpg 

3D6.jpg 

3D7.jpg 

3D8.jpg 

3D9.jpg 

3D10.jpg 

3D11.jpg 

3D12.jpg 

3D13.jpg 

3D14.jpg 

3D15.jpg 

3D16.jpg 

3D17.jpg 

3D18.jpg 

3D19.jpg 

3D20.jpg

 

  • Like 7
Link to comment
Share on other sites

Stunning work Mike, your Fokker is a piece of art and it was a pleasure to follow. The depth of detail is breathtaking and there are lots of points for the eyes to discover. By all that detail work you at least skipped working with Lozenge decals a lot ;).

Cheers Rob

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...