belugawhaleman Posted June 30, 2022 Share Posted June 30, 2022 Well, part of my recent order from Tower Hobbies came today. Some aftermarket for A kit I ordered from them. Usually, their shipments come the next day....but not this Time. The kit is Tamiya's recent Hummel, and it's being sent from their Ontario, California warehouse..... Not a good omen because we're talking FedEx here! Last time it took 2 weeks. Anyway, the aftermarket came! It's Tamiya's own replacement barrel for their Hummel, ( bumble bee in German). Their #12688 1/35 Scale German Hummel Metal Gun Barrel. It looks good, made of aluminum, with rifling it will make building the kit easier. A download of the instructions for the Kit shows a two-piece plastic barrel and eliminating the task of sanding and filling the two seams will add minutes to my existence ! 5 Link to comment Share on other sites More sharing options...
GusMac Posted June 30, 2022 Share Posted June 30, 2022 22 hours ago, GazzaS said: mmm.... Velveeta! WTF? Looks like plastic but I suppose you also put it in spray cans! 1 1 Link to comment Share on other sites More sharing options...
GazzaS Posted June 30, 2022 Share Posted June 30, 2022 22 minutes ago, GusMac said: WTF? Looks like plastic but I suppose you also put it in spray cans! It's handy for cheese sauces. Melts nice and easy... and works in sandwiches too. I haven't had any in over 25 years. 5 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted June 30, 2022 Share Posted June 30, 2022 1 hour ago, GazzaS said: It's handy for cheese sauces. Melts nice and easy... and works in sandwiches too. I haven't had any in over 25 years. When I was working as a stand-up comedian.... I used to put a slice inside of each of My shoes....... So that when I was onstage, I'd "feel funny". Oh, but that was A lifetime ago as they say. 7 Link to comment Share on other sites More sharing options...
DocRob Posted June 30, 2022 Share Posted June 30, 2022 1 hour ago, GazzaS said: It's handy for cheese sauces. Melts nice and easy... and works in sandwiches too. I haven't had any in over 25 years. And I thought you were talking filler or putty, You can't eat that stuff, or am I wrong? Cheers Rob 1 4 Link to comment Share on other sites More sharing options...
belugawhaleman Posted June 30, 2022 Share Posted June 30, 2022 7 minutes ago, DocRob said: And I thought you were talking filler or putty, You can't eat that stuff, or am I wrong? Cheers Rob Filler or putty?.....I've had my share....it ain't bad, but Velveta, haven't eaten it in years! Not since childhood in fact. 2 Link to comment Share on other sites More sharing options...
GazzaS Posted July 1, 2022 Share Posted July 1, 2022 9 hours ago, belugawhaleman said: Filler or putty?.....I've had my share....it ain't bad, but Velveta, haven't eaten it in years! Not since childhood in fact. Have you ever eaten at a Chilis? If you have had their Queso.... then you have had Velveeta. I worked at a Chilis for a short time after my time in the USMC. 3 Link to comment Share on other sites More sharing options...
GazzaS Posted July 1, 2022 Share Posted July 1, 2022 9 hours ago, DocRob said: You can't eat that stuff, or am I wrong? Cheers Rob Nothing wrong with it. Tastes like cheese. 2 3 Link to comment Share on other sites More sharing options...
DocRob Posted July 1, 2022 Share Posted July 1, 2022 Today my Proxxon mini mill arrived and it is MINI, I dare say it's a cute little thingy. You have only to mount the table with four screws and you are ready to go, if you purchased the milling cutters, which are not included. I did that with the help of a engineers square, because I don't own a dial test indicator. The first look and feel is promising, the clearance seems ok. Now I have to wait for my dividing apparatus and my mini vice to arrive and then I will continue with the Duchess of Kingstons masts, which will be milled and turned. As an immediate action, I cut a 3 cm thick wood panel with 500 x 500 mm size and added some rubber feet and screwed the mill and the woodworking lathe onto it. Cheers Rob 7 1 Link to comment Share on other sites More sharing options...
Martinnfb Posted July 1, 2022 Share Posted July 1, 2022 19 hours ago, GazzaS said: It's handy for cheese sauces. Melts nice and easy... and works in sandwiches too. I haven't had any in over 25 years. and that's why you're still alive 5 Link to comment Share on other sites More sharing options...
belugawhaleman Posted July 1, 2022 Share Posted July 1, 2022 1 hour ago, DocRob said: Today my Proxxon mini mill arrived and it is MINI, I dare say it's a cute little thingy. You have only to mount the table with four screws and you are ready to go, if you purchased the milling cutters, which are not included. I did that with the help of a engineers square, because I don't own a dial test indicator. The first look and feel is promising, the clearance seems ok. Now I have to wait for my dividing apparatus and my mini vice to arrive and then I will continue with the Duchess of Kingstons masts, which will be milled and turned. As an immediate action, I cut a 3 cm thick wood panel with 500 x 500 mm size and added some rubber feet and screwed the mill and the woodworking lathe onto it. Cheers Rob Cool! I've had a couple of the Chinese mini lathes over the years and I used them to make parts and fittings for my live steam hobby. My most recent lathe has sat unused at my mother's house for a few years.... I haven't had a chance to do the work needed To tune the lathe to get it to work its best. Usually I work on the compound and cross slide to get them working smoothly. Never got the chance to do that. Maybe I'll do that This week. I'm dying to get back to that kind of work. The last work I did was to make a replacement chimney for an Empire b 30 steam engine I have. On the Empire engines, the chimney unscrews to fill the boiler and it also houses the safety valve. 4 1 Link to comment Share on other sites More sharing options...
belugawhaleman Posted July 1, 2022 Share Posted July 1, 2022 10 hours ago, GazzaS said: Have you ever eaten at a Chilis? If you have had their Queso.... then you have had Velveeta. I worked at a Chilis for a short time after my time in the USMC. Yes, as seen on tv. 2 Link to comment Share on other sites More sharing options...
GazzaS Posted July 2, 2022 Share Posted July 2, 2022 Another club meeting and two more great acquisitions for less than half of retail. 4 1 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 3, 2022 Share Posted July 3, 2022 On 6/25/2022 at 7:28 PM, Martinnfb said: And then this arrived. Something to help if you do the digital camo: https://www.greathobbies.com/productinfo/?prod_id=BDRBD0041 1 2 Link to comment Share on other sites More sharing options...
mark31 Posted July 4, 2022 Share Posted July 4, 2022 Just recievd from the mail woman 7 1 Link to comment Share on other sites More sharing options...
harv Posted July 4, 2022 Share Posted July 4, 2022 Nice !!.....harv 2 Link to comment Share on other sites More sharing options...
BlrwestSiR Posted July 4, 2022 Share Posted July 4, 2022 35 minutes ago, mark31 said: Just recievd from the mail woman Mark, did yours come with instructions? I didn't get any with my D conversion. Carl 3 Link to comment Share on other sites More sharing options...
mark31 Posted July 4, 2022 Share Posted July 4, 2022 19 minutes ago, BlrwestSiR said: Mark, did yours come with instructions? I didn't get any with my D conversion. Carl Recievd them by mail Iff you whant i can sent them to you Pm inbound Mark 2 Link to comment Share on other sites More sharing options...
GusMac Posted July 4, 2022 Share Posted July 4, 2022 2 hours ago, BlrwestSiR said: Mark, did yours come with instructions? I didn't get any with my D conversion. Carl Hi Carl, I got mine emailed to me by John, so try popping him an email. 1 Link to comment Share on other sites More sharing options...
GusMac Posted July 4, 2022 Share Posted July 4, 2022 3 hours ago, mark31 said: Just recievd from the mail woman Hi Mark, you'll enjoy those, the E that I did was a pleasure and the resin parts fitted far better than most of the base Mirage III kit! 2 Link to comment Share on other sites More sharing options...
Martinnfb Posted July 4, 2022 Share Posted July 4, 2022 Happy birthday to me 7 1 Link to comment Share on other sites More sharing options...
GazzaS Posted July 4, 2022 Share Posted July 4, 2022 6 minutes ago, Martinnfb said: Happy birthday to me Yakity Yak.... Don't talk back! 1 7 Link to comment Share on other sites More sharing options...
Martinnfb Posted July 5, 2022 Share Posted July 5, 2022 6 Link to comment Share on other sites More sharing options...
GazzaS Posted July 5, 2022 Share Posted July 5, 2022 4 hours ago, Martinnfb said: Yuk, indeed. 4 Link to comment Share on other sites More sharing options...
Martinnfb Posted July 5, 2022 Share Posted July 5, 2022 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now