DocRob

Great output and a place to put them, nice. Cheers Rob

Here you can see, how the engines build up. On the left side is the CSM offer, on the right Lukgraph, which includes steel wire for the pushrods. Both kits don't have the spark plug wiring included. The Lukgraph parts after a simple cleanup session. The 3D-printed material is not as brittle as resin, it doesn't break that easy (These are my first printed parts) Cheers Rob

I compared my engine options, without showing the kit one. It's a little bit better detailed, than other plastic parts of the kit, but I only plan to use it in parts as a dummy for the right attachment. Lukgraph Le Rhone type J engine, 3D printed, with great detail and relatively easy clean up and construction. Copper State Models Oberursel UR.II engine in resin and PE, also very nice, but needs a little bit more work Comparison of the engine cases I think I will use the Lukgraph engine and use the CSM in my Roden DR.I. There are some differences between the two, but I read somewhere, that some captured Le Rhone engines were used in German Fokker E.V / D.VIII. Cheers Rob

Nice variety for a German only builder and quite some masterpieces among them. Looks like you had a great 2020 model wise. Cheers Rob

Great output and nicely done, congrats. Cheers Rob

Nice, I made on myself, when I was young. It was the first complex construction, everybody in my company had to build, while getting the education as an engineer. The final quality verdict was, how low you could go with the air pressure and the machine was still working (We used air instead of steam for the tests). It was great fun. Cheers Rob

I like the FT, well done Harv. Cheers Rob

Better a good one than hundreds of mediocre builds . The PZL looks great. Cheers Rob

Nice collection with wide variation, great builds. Like Jeff, I like the Zero best. Cheers Rob

If I was hijacking your thread, I apologize, it was without intent. I interpreted the title as an open thread, showing the individual 2020 output. Now that I see lots of different threads started by other members here, I got the feeling, I did wrong. On the other hand, I would have liked an 2020 works thread for everyone and not individual, because that's what LSM is about . Cheers Rob

Whatever a 'D' is, it seems, that you are not very fond of your build and I don't understand why. I like the paintjob a lot and the way, the figures interact, make the scene believable and interesting. Cheers Rob

My 2020 output was not bad quantity wise. I'm usually not a fast builder and to me it was a year full of distractions. Beside the finished models, I spent lots of time on other long term projects, which had some progress to show for and maybe some RFI to follow soon. I learned many new techniques this year, throwing me purposely into projects, which needed to adapt lots of new stuff and broadened my modelling skills more than other years. You will notice, that I'm biased a little towards WWI planes in the moment, but I like the variety in my output this year. Not all the builds were LS and quality wise you will be the judge... Cheers Rob T-90 from Meng Pfalz D.III Wingnut Wings Nautilus in 1/144 from Pegasus My Eduard SSW twins in 1/48 AMK Mig-31 in 1/48 Hansa Brandenburg W.12 Wingnut Wings Lada Niva 1/35 from Balaton Models

Quality builds all around, but I have to say, I like the Mig best, which had a wird painting phase, hen I remember it right. Nice output in a crazy year. Cheers Rob

Thank you Gaz, that's priceless, I never heard about this method before. Our dental care will be in jeopardy now, I know about this . Your method seems easier controllable, than to work with grinding bits on a micro drill, where it is so easy to ruin the surrounding areas and I always found it hard to work with, without having a melting effect on the plastic, even with the lowest rpm setting. Cheers Rob

An interesting and different looking plane. The psychedelic cowling is an eye catcher and the relaxed fellow leaning on it adds to the atmosphere of the scene. Cheers Rob

The engine looks great, love the exhaust colour and the wires. Cheers Rob

Nice work. It's a sweet little kit and I like, what you have done with it. To me the best thing on the kit itself is the resin figure. I will try some new painting techniques on this big scale guy. Cheers Rob

Nice engineering on the Würger, I mean your work, not the plastic . I have to build one in the near future, I have only a TA-152 to show for, which is partly untrue, because I gave it to a friend. Could you enlighten us, how your electric toothbrush sanding device works, as a tool nerd, I really like to know. Cheers Rob

Nice progress with the pit Harv. Cheers Rob

Are you sure about the dark colour of the bombs. I haven't done any research, but found some pics of a Gotha G.V in night Lozenge with a light colour (looks like grey) for the bombs. Cheers Rob

Merry Christmas Amigos, we were surfing yesterday in brutal storm waves. Not much fun, but very exhausting and gave the right appetite for a BIG fondue. Cheers Rob

Nice and sandy look, well done, sometimes there is a lot of fun in these little projects. Cheers Rob

Thanks Gaz, Albion has the so called slide-fit sets, with three tubes of different diameter included, that's a good way to start, as you don't need a lot of tube for some wheelstruts. I took the measurements from the plastic. The larger struts are 2,00 mm wide in plastic, which equals to a 1,5 mm tube flattened. Thanks Kai? I think the struts on a DR.I are way stronger and shorter in plastic and there is no real need to replicate these in brass. If I remember it right, the DR.I struts have a curved conture, where they connect to the wing. This will be hard to replicate. Thanks, definitely a kit, which needs some extra work here and there . Cheers Rob

Oh, I found a small box with intriguing box art in my stash. It's a 2020 release and has to be mentioned here, albeit it is in 1/72 It's the Grumman FM-2 Wildcat from Arma Hobby, a well designed kit, with masks and PE in the box, amongst several decal variants. Cheers Rob

Wow, looking great, like Harv, I especially like the worn look of the leather on the seat. Cheers Rob