Peterpools Posted February 24, 2021 Posted February 24, 2021 Set looks super - looking forward to a 'How to" Keep 'em comin Peter 3
AlanG Posted February 25, 2021 Posted February 25, 2021 19 hours ago, One-Oh-Four said: but if the Brassin pit is a hands-down winner and much better overall, I might reconsider... You've answered your own question there. Hands down winner imho. Same goes for the Brassin engine 5
Administrators JeroenPeters Posted February 27, 2021 Author Administrators Posted February 27, 2021 Small steps on the pit. It is a great improvement over the Revell pit. 12
Peterpools Posted February 28, 2021 Posted February 28, 2021 Jeroen Absolutely a vast improvement! Keep 'em comin Peter 3
Administrators JeroenPeters Posted February 28, 2021 Author Administrators Posted February 28, 2021 For some reason the HGW inside and outside masks are too small. So had to add some additional masking tape. Eduard cockpit combing added too. 9
Peterpools Posted March 1, 2021 Posted March 1, 2021 Jeroen What an eye for catching and correcting problems Keep 'em comin Peter 3
DocRob Posted March 1, 2021 Posted March 1, 2021 Nice work on the Focke, Jeroen. You are a brave man, adding PE to the canopy, a thing which always scares me. Do you glue it with Future or do you use CA? I will not use HGW vinyl type masks anymore, as they never fitted properly, when I used them. Cheers Rob 4
Administrators JeroenPeters Posted March 3, 2021 Author Administrators Posted March 3, 2021 First parts of the Brassin ammo and gunbay. Lovely stuff! 13
Kaireckstadt Posted March 3, 2021 Posted March 3, 2021 8 minutes ago, JeroenPeters said: First parts of the Brassin ammo and gunbay. Lovely stuff! Great start Jeroen and really nice brass-stuff! Looks really beautiful! 6
Administrators JeroenPeters Posted March 4, 2021 Author Administrators Posted March 4, 2021 Bought a few more sets today. Eduard flap set, master barrels and the HGW wet transfer decals. 7
Wingco57 Posted March 5, 2021 Posted March 5, 2021 Did you make an apointment with LHS to visit for a duration of ten minutes? Time for me to have a visit again, it's been too long. 3
Administrators JeroenPeters Posted March 5, 2021 Author Administrators Posted March 5, 2021 7 hours ago, Wingco57 said: Did you make an apointment with LHS to visit for a duration of ten minutes? Time for me to have a visit again, it's been too long. Nope. Collect at the door. Again. Managed to replace the kit Mg151 barrels with the Master ones’. The Eduard wheelbay upgrade is fiddly, but then again: so am i. 12
Martinnfb Posted March 5, 2021 Posted March 5, 2021 And here we go again, Jeroen's magic in action. Sweet! 6
Peterpools Posted March 6, 2021 Posted March 6, 2021 Jeroen Incredible PR work. Keep 'em comin Peter 3
BlrwestSiR Posted March 6, 2021 Posted March 6, 2021 That PE work is so neat and tidy. I usually have CA everywhere but where I need it. 3 2
GusMac Posted March 6, 2021 Posted March 6, 2021 8 hours ago, BlrwestSiR said: That PE work is so neat and tidy. I usually have CA everywhere but where I need it. Know the feeling Carl. Especially with PE belts, I usually end up with at least one part stuck to me. 1 2
DocRob Posted March 6, 2021 Posted March 6, 2021 19 minutes ago, GusMac said: Know the feeling Carl. Especially with PE belts, I usually end up with at least one part stuck to me. Don't build too many planes Gus, people will look irritated, when they meet you . I know the feeling, you can't live without PE, but it can be a pain. Jeroen however, seems to be non stick, seeing the quality of his PE work. Cheers Rob 2 1
Peterpools Posted March 7, 2021 Posted March 7, 2021 PE, no problems at all - most of the time I glue it onto my finger or applicator - gettingthe part on the kit - that’s a whole other story Keep ‘em comin Peter 3
Administrators JeroenPeters Posted March 7, 2021 Author Administrators Posted March 7, 2021 Thnx guys. Small steps. The wheelbay is tricky. Make sure to widen the holes for the mg151’s in the Eduard set a teeny bit. Otherwise the master barrels won’t fit through. You really need to plan the sequence here in subassemblies. In other news: my 285€ Iwata TR1 died on me last week. The screw thread of the nozzle in the brush somehow got damaged. This is not covered by the 5 year warranty. Needle and nozzle not covered. The airbrush store is trying to fix it. If not: i’ll buy a new one. 8
Peterpools Posted March 7, 2021 Posted March 7, 2021 Jeroen it’s always something that seems to go south when lest expected - especially now, when getting things fixed or replaced is a job in itself! Keep ‘em comin Peter 3
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now