Jump to content
Playing in the Sandbox Group Build Sept 1, 2024 - Jn 1, 2025

HPH Cutaway Catalina


Recommended Posts

31F2DF84-2E83-4A4F-AE00-4C4DC1C32D37.jpeg.0ca1deb7076387c8b5c71910a9472c34.jpeg

I finally started on my cutaway Catalina from hph, it will be a real challenge, but I think this is a fantastic kit, and the Catalina is one of the most

beautiful aircraft ever build.

I won't bother by showing the parts in the kit because there are a number of reviews on this subject, so I will go on with the build,

The manual of this kit is on cd, so I printed it, and I downloaded it on my I-pad, (very handy when you want to enlarge some build stages to see how the parts have to be placed)

First started to put numbers on the resin sheets that hold the parts so they correspond with the numbers in the manual. I soon found out that there are a lot of numbers that just don't exist or have the wrong number, and a lot of parts just don't have a number. So you regularly are searching for parts that you need, and there 

are lot's of parts!

I first started on the bulkheads ......

A7D46FA8-8F86-4C24-8C9E-AFF47AFF61EE.jpeg.8287a246f5e0f6ef42bfd32b73a9080f.jpeg12B893B3-0B8B-4E41-AB26-6864E7176C52.jpeg.5ba2d2149d12cac4c782705eb61513c7.jpeg

E89B9A76-B168-45D7-ACEC-26FD0B2A0C88.jpeg.d0cb7f296fddcca9ff8aecd14e6dbed7.jpeg

52EB3D0D-2F8A-40AA-B36A-878EC69768CA.jpeg.1972a99ca466162bdd010e042244b868.jpeg

You really have to look and dry fit the parts a number of times before you actually glue them together, the bulkhead that you see now must line up with the landing gear housing, and it's really tricky to get that right. I painted the parts in interior green before placing them in the fuselage, because later on it will be very difficult 

C6CBF5B0-C32D-4281-8BC8-DD663028B383.jpeg.6573af2f8c2d1bdf8376f711132865f4.jpeg

A4BC09FB-786E-4268-97E3-C0681ECBB4C3.jpeg.deb45ae3978dd2461c0d599c4e5213a6.jpeg

0260FF7E-3EC0-409F-9FD2-EF97EAEA7F04.jpeg.4f01a1b1f316c24f572826f617abcd30.jpeg

Started by placing the ribs in place, and dry fit the forward bulkhead

0A83B7DB-D4DC-491A-8EB0-2AF36C682324.jpeg.611b713b716f77244b7b93b30bf5bf12.jpeg

The center section and the ribs in pace on the center pylon, dry fit of the bulkhead 

6537F3E4-1416-49A2-9A5F-577D4EC8D1D4.jpeg.24966dd60f2afb92c3720fa987211b27.jpeg

Dry fitting the ribs in the rear section, and the rear bulkhead

BC154501-6F35-4540-B517-FB8692EBC6CA.jpeg.c207600e110831ada7473368d952aade.jpeg

line up of the various bulkheads, (endless fitting, sanding, fitting, sanding etc)

2EE922FE-AAF2-4FBE-B923-07449345E199.jpeg.9f0f43596c1777f49e5a0ea1e6d59f81.jpeg

Placed all the ribs in the tail section

66A3B561-7CEA-496F-BCA1-8A18FF325415.jpeg.a46b9d575977c5e15c32636b566d9c15.jpeg

D20C1348-0E35-41F9-B23B-F2056B223C76.jpeg.70c8eaa464ae872356696f5a80f26717.jpeg

43305FAF-7166-4BD0-A54A-4399E3A1114C.jpeg.a3dead911e596c6def8a3ad82c8df7a7.jpeg

A2E3CEF2-188C-498A-AC1E-142819A32FCA.jpeg.838e8dc6ceb7a4143a2687a59de47c1f.jpeg

9164C414-1ADD-4A95-8529-ACD05F9053EF.jpeg.6f3981874894abd35611da9f227a6ffc.jpeg

Tail section almost complete

F64AF23A-A1DA-4104-A4D8-7D1CF04F6843.jpeg.f9003bd41448d28762b1c63abb9c9536.jpeg

The detail in this kit is insane

92045CF6-EAA1-49CC-9F42-8C4B8ED48AF1.jpeg.21734ed4ee2113f6ab7913afda8ec715.jpeg

That's it for now, I will soon have  more pictures, sometimes I am working another part of this kit, I am now working on the wing and the engine,

Greetz,

Frank

 

 

86A4FB72-F86B-4857-83B1-C1FE398E16A5.jpeg

87E9B939-E29E-42E7-B0BB-063C68BC6123.jpeg

6F784A0D-11AC-40AF-8D2A-23F5E0B2B250.jpeg

9F74F249-E5C9-48E9-98A7-471CBF93C6E3.jpeg

C2CEC331-A6DF-4B44-A5F8-2627446D809A.jpeg

543D397C-EE55-4F06-BC02-F0A12D3B7CA1.jpeg

  • Like 18
  • Thanks 2
Link to comment
Share on other sites

34 minutes ago, Trigger said:

31F2DF84-2E83-4A4F-AE00-4C4DC1C32D37.jpeg.0ca1deb7076387c8b5c71910a9472c34.jpeg

I finally started on my cutaway Catalina from hph, it will be a real challenge, but I think this is a fantastic kit, and the Catalina is one of the most

beautiful aircraft ever build.

I won't bother by showing the parts in the kit because there are a number of reviews on this subject, so I will go on with the build,

The manual of this kit is on cd, so I printed it, and I downloaded it on my I-pad, (very handy when you want to enlarge some build stages to see how the parts have to be placed)

First started to put numbers on the resin sheets that hold the parts so they correspond with the numbers in the manual. I soon found out that there are a lot of numbers that just don't exist or have the wrong number, and a lot of parts just don't have a number. So you regularly are searching for parts that you need, and there 

are lot's of parts!

I first started on the bulkheads ......

A7D46FA8-8F86-4C24-8C9E-AFF47AFF61EE.jpeg.8287a246f5e0f6ef42bfd32b73a9080f.jpeg12B893B3-0B8B-4E41-AB26-6864E7176C52.jpeg.5ba2d2149d12cac4c782705eb61513c7.jpeg

E89B9A76-B168-45D7-ACEC-26FD0B2A0C88.jpeg.d0cb7f296fddcca9ff8aecd14e6dbed7.jpeg

52EB3D0D-2F8A-40AA-B36A-878EC69768CA.jpeg.1972a99ca466162bdd010e042244b868.jpeg

You really have to look and dry fit the parts a number of times before you actually glue them together, the bulkhead that you see now must line up with the landing gear housing, and it's really tricky to get that right. I painted the parts in interior green before placing them in the fuselage, because later on it will be very difficult 

C6CBF5B0-C32D-4281-8BC8-DD663028B383.jpeg.6573af2f8c2d1bdf8376f711132865f4.jpeg

A4BC09FB-786E-4268-97E3-C0681ECBB4C3.jpeg.deb45ae3978dd2461c0d599c4e5213a6.jpeg

0260FF7E-3EC0-409F-9FD2-EF97EAEA7F04.jpeg.4f01a1b1f316c24f572826f617abcd30.jpeg

Started by placing the ribs in place, and dry fit the forward bulkhead

0A83B7DB-D4DC-491A-8EB0-2AF36C682324.jpeg.611b713b716f77244b7b93b30bf5bf12.jpeg

The center section and the ribs in pace on the center pylon, dry fit of the bulkhead 

6537F3E4-1416-49A2-9A5F-577D4EC8D1D4.jpeg.24966dd60f2afb92c3720fa987211b27.jpeg

Dry fitting the ribs in the rear section, and the rear bulkhead

BC154501-6F35-4540-B517-FB8692EBC6CA.jpeg.c207600e110831ada7473368d952aade.jpeg

line up of the various bulkheads, (endless fitting, sanding, fitting, sanding etc)

2EE922FE-AAF2-4FBE-B923-07449345E199.jpeg.9f0f43596c1777f49e5a0ea1e6d59f81.jpeg

Placed all the ribs in the tail section

66A3B561-7CEA-496F-BCA1-8A18FF325415.jpeg.a46b9d575977c5e15c32636b566d9c15.jpeg

D20C1348-0E35-41F9-B23B-F2056B223C76.jpeg.70c8eaa464ae872356696f5a80f26717.jpeg

43305FAF-7166-4BD0-A54A-4399E3A1114C.jpeg.a3dead911e596c6def8a3ad82c8df7a7.jpeg

A2E3CEF2-188C-498A-AC1E-142819A32FCA.jpeg.838e8dc6ceb7a4143a2687a59de47c1f.jpeg

9164C414-1ADD-4A95-8529-ACD05F9053EF.jpeg.6f3981874894abd35611da9f227a6ffc.jpeg

Tail section almost complete

F64AF23A-A1DA-4104-A4D8-7D1CF04F6843.jpeg.f9003bd41448d28762b1c63abb9c9536.jpeg

The detail in this kit is insane

92045CF6-EAA1-49CC-9F42-8C4B8ED48AF1.jpeg.21734ed4ee2113f6ab7913afda8ec715.jpeg

That's it for now, I will soon have  more pictures, sometimes I am working another part of this kit, I am now working on the wing and the engine,

Greetz,

Frank

 

 

86A4FB72-F86B-4857-83B1-C1FE398E16A5.jpeg

87E9B939-E29E-42E7-B0BB-063C68BC6123.jpeg

6F784A0D-11AC-40AF-8D2A-23F5E0B2B250.jpeg

9F74F249-E5C9-48E9-98A7-471CBF93C6E3.jpeg

C2CEC331-A6DF-4B44-A5F8-2627446D809A.jpeg

543D397C-EE55-4F06-BC02-F0A12D3B7CA1.jpeg

This is a real challenge and you made a perfect start! Looks really awsome.

How bid is this beauty? 

  • Like 5
Link to comment
Share on other sites

8 hours ago, HubertB said:

Here’s a brave man tackling a great subject :popcorn:

Hubert

Thanks Hubert, it indeed is a daunting subject with lot's of interior detail, I hope I can persist to the end, I trie to be as careful as possible, because the parts are very fragile, and just by touching some of the finer parts you can ruin the details

  • Like 5
Link to comment
Share on other sites

8 hours ago, Kaireckstadt said:

This is a real challenge and you made a perfect start! Looks really awsome.

How bid is this beauty? 

it is almost 61 cm long so it is a real handful to move around, constantly worrying not to knock of any detail while handling

  • Like 5
Link to comment
Share on other sites

7 hours ago, DocRob said:

I've not seen too many builds of the cut away Cat. I was tempted often, but, it's to much for me. Keep up the great work.
I'm sure you know about the one exhibited in NASM Pensacola Florida.

Cheers Rob

PBY1.thumb.jpg.05367660d0e0e3fb1d9ea5984a35bf5b.jpg

PBY2.thumb.jpg.9a66166f3e89c8c27ea6dfe343665c9a.jpg

PBY3.thumb.jpg.5b9d24e2e8122d54d17cc0a98dd13ab9.jpg

 

 

I did see it on the internet and have used it a number of times to get good references for my build, the hph manual doesn't cover all the details so you need to do a lot of research to get thing right, thanks for the pics

  • Like 5
Link to comment
Share on other sites

5 hours ago, BlrwestSiR said:

Fantastic start on a very complex model. 

It certainly is complex, you have to think two steps ahead before assembling parts, you kind of have to make your own way of the sequence in constructing the various parts

 

  • Like 4
Link to comment
Share on other sites

I started on the engine a sa sort of sub build and to be doing something else than placing ribs in the fuselage, after a while your eyes won't cooperate

any more, si it's good to be doing something else. the engine itself is a fantastic piece of kit with awesome details, have a look for yourself.....

E3F2B8F9-4732-4F1E-AF19-34A950FD6F89.jpeg.809ffd49f25b7f09bac1252fcf294709.jpeg

A27B1D85-3841-4D51-848E-11914AFBFA6F.jpeg.913f65fe30f9122a7d827856d8e0b15d.jpeg

93FB15CF-4604-4F76-BDF2-134A82501772.jpeg.c9cfce3a6d15a0b0d16108fa295b3666.jpeg

565BF2E0-F8FA-4169-9D9F-D8E2C44D6290.jpeg.3e7b3f98cc80eed8d325c99d81c4ed45.jpeg

401857BD-6015-4CE7-86D5-9AE543BC4D42.jpeg.8435dd1791611093bf6a042bdeffc34b.jpeg

3B1629E0-FEFC-4037-A96B-1EF1BE459396.jpeg.c7a3f7a1605fb4ef4135a59c7a6bf065.jpeg

used some brass and glued the cilinder heads in place

3FC493C2-D77F-4F23-A05C-5D22C9E30BD6.jpeg.0bd391a92cafd0b59a25be1009f71cb1.jpeg

89F3AEF8-8AAD-4AD7-AA82-B1C14498FDB3.jpeg.1b9f10a455be3367c6dffa8cd1f4f609.jpeg

Put some paint on

690F3A44-EAF7-4D91-BE86-F6DFE0EEA443.jpeg.8650acb5a0bd6a2d68ce92650cd05e88.jpeg

AEBA9ABE-DB60-4F3C-A919-EF5AEC0C4660.jpeg.320e9db0f43caa7a7433b7acf2de3e1d.jpeg

Done some weathering with panel liner from Tamiya, makes the cooling ribs from the cilinders stand out a bit

C6CF5F4C-AB5C-44CC-AD9F-147961997D11.jpeg.35c20869b1beff47470571b6b2f098af.jpeg

placed the guid plates where the ignition wires will run through

C056C44F-6A82-4B3B-B238-4597E0201107.jpeg.68b4cee88de825467c4d58442e8ccbbb.jpeg

Just to show the size of the engine, it's quite a fiddly job

600D0996-5211-4612-AF1C-E886FEE01AD9.jpeg.8398597e3d1140db583fd45dbb2d9da5.jpeg

One ingnitio wire in place, bought those from Anyz, they produce braided wires that really makes the engine wires look real

That is it for now, I am now placing the ignition ring and wires in place, so more pics to follow soon,

 

Greetz

Frank

 

E3F2B8F9-4732-4F1E-AF19-34A950FD6F89.jpeg

4384C7B0-9525-4EC4-AB1E-2BB699669AFD.jpeg

42C1119D-F1CB-482B-A96B-E103557C3760.jpeg

0FADD068-892B-4270-86A8-9C946B194812.jpeg

CC9DE405-564F-43DD-A56C-8DC7F8FF06F2.jpeg

  • Like 8
  • Thanks 1
Link to comment
Share on other sites

1 hour ago, Trigger said:

I started on the engine a sa sort of sub build and to be doing something else than placing ribs in the fuselage, after a while your eyes won't cooperate

any more, si it's good to be doing something else. the engine itself is a fantastic piece of kit with awesome details, have a look for yourself.....

E3F2B8F9-4732-4F1E-AF19-34A950FD6F89.jpeg.809ffd49f25b7f09bac1252fcf294709.jpeg

A27B1D85-3841-4D51-848E-11914AFBFA6F.jpeg.913f65fe30f9122a7d827856d8e0b15d.jpeg

93FB15CF-4604-4F76-BDF2-134A82501772.jpeg.c9cfce3a6d15a0b0d16108fa295b3666.jpeg

565BF2E0-F8FA-4169-9D9F-D8E2C44D6290.jpeg.3e7b3f98cc80eed8d325c99d81c4ed45.jpeg

401857BD-6015-4CE7-86D5-9AE543BC4D42.jpeg.8435dd1791611093bf6a042bdeffc34b.jpeg

3B1629E0-FEFC-4037-A96B-1EF1BE459396.jpeg.c7a3f7a1605fb4ef4135a59c7a6bf065.jpeg

used some brass and glued the cilinder heads in place

3FC493C2-D77F-4F23-A05C-5D22C9E30BD6.jpeg.0bd391a92cafd0b59a25be1009f71cb1.jpeg

89F3AEF8-8AAD-4AD7-AA82-B1C14498FDB3.jpeg.1b9f10a455be3367c6dffa8cd1f4f609.jpeg

Put some paint on

690F3A44-EAF7-4D91-BE86-F6DFE0EEA443.jpeg.8650acb5a0bd6a2d68ce92650cd05e88.jpeg

AEBA9ABE-DB60-4F3C-A919-EF5AEC0C4660.jpeg.320e9db0f43caa7a7433b7acf2de3e1d.jpeg

Done some weathering with panel liner from Tamiya, makes the cooling ribs from the cilinders stand out a bit

C6CF5F4C-AB5C-44CC-AD9F-147961997D11.jpeg.35c20869b1beff47470571b6b2f098af.jpeg

placed the guid plates where the ignition wires will run through

C056C44F-6A82-4B3B-B238-4597E0201107.jpeg.68b4cee88de825467c4d58442e8ccbbb.jpeg

Just to show the size of the engine, it's quite a fiddly job

600D0996-5211-4612-AF1C-E886FEE01AD9.jpeg.8398597e3d1140db583fd45dbb2d9da5.jpeg

One ingnitio wire in place, bought those from Anyz, they produce braided wires that really makes the engine wires look real

That is it for now, I am now placing the ignition ring and wires in place, so more pics to follow soon,

 

Greetz

Frank

 

E3F2B8F9-4732-4F1E-AF19-34A950FD6F89.jpeg

4384C7B0-9525-4EC4-AB1E-2BB699669AFD.jpeg

42C1119D-F1CB-482B-A96B-E103557C3760.jpeg

0FADD068-892B-4270-86A8-9C946B194812.jpeg

CC9DE405-564F-43DD-A56C-8DC7F8FF06F2.jpeg

Wow,that’s simply wow! 
Your speed is really amazing! And the results are awesome. 
Thanks also for the tip with the ignition wires!

  • Like 2
Link to comment
Share on other sites

6 hours ago, mark31 said:

very nice work

will try to follow you i have the full kit over here for a few years now

one day i will start it

 

Mark

Hello Mark, I wanted to buy the full kit at first, but I thought it would be a waste to close up all the detail when you put the fuselage sides together, I have seen one build on Large scale planes of someone who built the entire kit and opened up the Portside of the fuselage on a number of places to show the details, that must have been a real challenge, thanks for the response,

Frank

  • Like 4
Link to comment
Share on other sites

2 hours ago, Peterpools said:

Mike

Will be following all the way - awesome start and easily will be the center of your display case when finished

Keep 'em comin

Peter

Thanks for the response, it certainly will be the center of my display case, I actually have to make a case for it because of the size, just making my way through the wing section, pic' s to follow.....

  • Like 3
Link to comment
Share on other sites

As promised here are some pictures of the construction of the wing section,

A083BA8B-E390-410A-8A41-BF54644C9084.jpeg.e898d2febf83fb62875f70d43dc7cbfa.jpeg

primed the insides that will be visible

03018873-A27C-463F-857A-A972C46F87F5.jpeg.c5967cb69541a6184eedf49f4d3d6549.jpeg

17671245-A0EE-41A6-AB45-FDCA89F2960F.jpeg.4ead45b0c13cbc410cd4290c59188077.jpeg

Wing halves glued together, needless to say there was a lot of fitting and sanding to be done, but this is the end  result

7DFDC4F8-ED94-49B7-8FC9-6166B70727EB.jpeg.658bb6d59b4c1d18f9a1421376583840.jpeg

20E98639-8AC2-4AE4-95AC-A689A82C4A96.jpeg.af2fc8ee5bb33914e075dadfb3e520d5.jpeg

C76323A1-0B4C-4D58-9FD9-09FE349FCA8E.jpeg.7f4dd8191c4e01efc465a209283cb73a.jpeg

the frames painted interior green, ready to be assembled, ( it was a complete nightmare to get those of their resin casting sheets, and the to clean them up without damaging, they are so fragile)

974AF1E6-B7AF-4DB9-9D1C-210020AB30E4.jpeg.f769db21317b3e0b07320ffdbd78d445.jpeg

put the wing as flat as possible as to get the frames glued in the right position/alignment. I only glued the top part of the frame, the bottom part of the frame will be done when I flip the wing over, constantly aware of the alignment, if this is not done properly I will ruin this build, so moving on very carefully

AE76F373-0259-44C2-9220-A55297A072E7.jpeg.13e2e906b15a33a29bd382f7025c9b82.jpeg

6714CE62-AD6A-4E8F-B598-20710A985470.jpeg.a2616c62e7d2d3fface0170aed63df2c.jpeg

Not bad at all, now I have to glue the bottom part of the frames without messing up the alignment, very nerve wrecking job, when this is done I have to glue an end piece to the rear of the frames, I have to cut a piece of the frames to make it fit

IMG_1406.jpg.e27e98e5ee0b88548c88420bdf2b0589.jpg

IMG_1405.jpg.e70fad00ef1f838e5b16590e758d4190.jpg

As you can see not all the frames have the same length, so I first have to line them up properly to make the end piece fit, that's for later on, more pictures to follow

Here are some pictures how I remove resin cast pieces from their casting sheets.... for this example I used one of the bunks of the aircraft,

IMG_1338.jpeg.114427cfdb860453263449b83681dbd7.jpeg

I usually take a very fine razor saw as thin as possible and with very fine teeth, I'll start in the corner of the piece because there the resin is the thickest , the casting are very well engineered by the way, only the corners and at some points there is a lot of resin to hold the part to the sheet.

3835A514-E04A-4046-B86B-DC7301E600D6.jpeg.5265640c8fb2059582bf4689f3956e3a.jpeg

Very fine razor saw

EA8F9FB7-C0B5-4869-BAF8-122BCCEB2A0C.jpeg.5ef81d0df4c737db603750c841c73a90.jpeg

The trick is to use as little force as possible and move the saw as gently as possible

33E933DF-C0F3-4DED-9B3A-1FB6C7305956.jpeg.5d820be824a2e1cabe76329e0b7bf399.jpeg

As you cab see, the part has very much resin in the corners, but not as much further to the middle, making it easier to saw

IMG_1342.jpeg.91871ede09afefbef8ba56ade1b079f7.jpeg

What's left is a lot of clean up , I use a combination of sanding and scraping with a very sharp exact blade, for me this works well

That's it for now, more to follow

 

Frank

 

  • Like 13
Link to comment
Share on other sites

Hi there,

Done some work on the Catalina, some work on the wing, some sub assemblies an for the most part cleaning up parts, priming them and put some paint 

on them, have a look,

IMG_1407.jpg.497d7a98d400db8321637eeba0e65abc.jpg

This is where I left of, lined the wing up on my cutting mat, fortunately this part of the wing is straight, so it was easy enough to line up the ribs on the cutting mat, and cut them to the right length,

 

IMG_1409.jpg.4bff4aa2f55c1e78baaf8b504475514c.jpg

IMG_1411.jpg.955f6ec3b5aaea6bcbe3d1a2973d1873.jpg

One of the ribs stuck out a little bit, I had to cut just a little piece of the base of this rib, and then glued it back together to make it fit.

IMG_1412.jpg.131ec3d410e951ff07f3244ef3e30e00.jpg

After that I could glue the end piece on the frames, one frame needed a little piece of plasticard, was cut just 0,10 th of a mm short, but it wasn't to difficult.

IMG_1414.jpg.689e90cc8b24b4d849d12f0e49d31020.jpg

Decided to put in the nose turret, it needed some trimming to fit properly in the fuselage, and then moved on to the turret itself,

IMG_1415.jpg.05da8c27b96b092d8aa75eb8ae6b6b14.jpg

IMG_1416.jpg.32b3c6e21379313c59794adade27a0b6.jpg

Test fitted it and masked the thing inside and outside so I could get some interior green on it,

IMG_1437.jpg.a7b11142ef7f83d1fabb0e4e61e8f224.jpg

after that it was time to get some interior green on the inside of the fuselage, before putting in the bulkheads, it now was easy to paint without the bulkheads in the way, the tail section was quite an exercise with all those little gaps between the ribs, see for yourself , made a temporary jig to put the fuselage in to be able to move it around.

IMG_1455.jpg.bf3567b390d064b936b3a2f5d76e386e.jpg

IMG_1456.jpg.cda3b07388ee1a28cab34ccb0c73d54e.jpg

IMG_1457.jpg.ed3dcd6e13810f6e019ba4e2a201af14.jpg

IMG_1458.jpg.023b65f20b9b8300f9f903875ff519c3.jpgIMG_1459.jpg.d95ec1ff2558513ac25bfaac2a5ea909.jpg

IMG_1460.jpg.6498f69c6ae0558b6a098309d4ff1944.jpg

Ashot from the other side, this thing is really big....

IMG_1461.jpg.b22c18883ac6d84c4f91e40e23f0a996.jpg

IMG_1462.jpg.c33a8d375fcdc8b177e8975670318119.jpgIMG_1463.jpg.40ed13ba4f87922ca96a1577fac24e16.jpg

IMG_1464.jpg.c54a02b1f138b6ee1492c1e57d67b09e.jpg

So now I can move forward getting the bulkheads in, painted a lot of the parts needed , and cleaned them up

IMG_1435.jpg.698eb014cd7805e034f5da960a628238.jpg

Well, that is pretty much how far the build is right now, I am now working on the cockpit and the pilot seats, but that's for the next time,

 

greetz,

Frank

 

IMG_1408.jpg

IMG_1410.jpg

IMG_1413.jpg

IMG_1441.jpg

  • Like 11
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...