airscale Posted September 29, 2018 Share Posted September 29, 2018 very, very nice wish I could get back & finish mine - it's the kit that got me back into modelling after a 20 year break you are making a superb job of this one Peter 4 Link to comment Share on other sites More sharing options...
JohnB Posted September 29, 2018 Share Posted September 29, 2018 Outstanding! Some really nice work! 1 Link to comment Share on other sites More sharing options...
PeteF Posted October 1, 2018 Author Share Posted October 1, 2018 More cockpit work including a frustrating but eventually successful attempt at little toggle switches. Eventually made a panel of thin styrene, marked and punched dents for position and cut small bits of lead wire and CA glued them in place. Then used side cutters to cut them to the right length. The airfix panel and tubes on the starboard cockpit were pretty good otherwise. Needed a couple of more wires from my reference. Added the oxygen hose I made a while back and some more fiddly detail t the port side. Hose isn’t attached here. 10 Link to comment Share on other sites More sharing options...
harv Posted October 1, 2018 Share Posted October 1, 2018 Wowzers that's good !..... Harv 3 Link to comment Share on other sites More sharing options...
Administrators Clunkmeister Posted October 1, 2018 Administrators Share Posted October 1, 2018 Wow Pete! This is amazing. It looks real. That’s all I can say, man. 3 Link to comment Share on other sites More sharing options...
Wingco57 Posted October 1, 2018 Share Posted October 1, 2018 I believe those spar strenghteners are a post war mod and not used during wartime. Cees 3 Link to comment Share on other sites More sharing options...
PeteF Posted October 1, 2018 Author Share Posted October 1, 2018 4 hours ago, Wingco57 said: I believe those spar strenghteners are a post war mod and not used during wartime. Cees Ah, good to know before I get the new wing. Pity though, the wing lacks detail. 3 Link to comment Share on other sites More sharing options...
PeteF Posted October 1, 2018 Author Share Posted October 1, 2018 On 9/29/2018 at 2:26 PM, airscale said: very, very nice wish I could get back & finish mine - it's the kit that got me back into modelling after a 20 year break you are making a superb job of this one Peter Interesting that it was the same kit that got me back into modeling...though hardly at the same level as you sir! 5 Link to comment Share on other sites More sharing options...
Wingco57 Posted October 1, 2018 Share Posted October 1, 2018 1 hour ago, PeteF said: Ah, good to know before I get the new wing. Pity though, the wing lacks detail. That's the Mossie for you, as smooth as silk. A wonderful airframe with impressive performance but a boring model to paint 6 Link to comment Share on other sites More sharing options...
PeteF Posted October 1, 2018 Author Share Posted October 1, 2018 5 hours ago, Wingco57 said: That's the Mossie for you, as smooth as silk. A wonderful airframe with impressive performance but a boring model to paint I'll probably still make a hint of it by masking it, building some primer up and removing the mask so I have a line to add some weathering to 5 Link to comment Share on other sites More sharing options...
williamj Posted October 1, 2018 Share Posted October 1, 2018 Climb right in.....nice. 3 Link to comment Share on other sites More sharing options...
PeteF Posted October 2, 2018 Author Share Posted October 2, 2018 Hey! Some recognizable plane parts! 5 Link to comment Share on other sites More sharing options...
Uncarina Posted October 2, 2018 Share Posted October 2, 2018 Excellent work on tha cockpit. You are bringing this kit to life! Cheers, Tom 1 Link to comment Share on other sites More sharing options...
Jeff Posted October 3, 2018 Share Posted October 3, 2018 Some REAL plane parts.... 4 Link to comment Share on other sites More sharing options...
PeteF Posted October 3, 2018 Author Share Posted October 3, 2018 2 hours ago, Jeff said: Some REAL plane parts.... So are the flaps wood or metal? I read conflicting things. 4 Link to comment Share on other sites More sharing options...
Jeff Posted October 3, 2018 Share Posted October 3, 2018 Those flaps would be wood for sure.... 3 Link to comment Share on other sites More sharing options...
Jeff Posted October 3, 2018 Share Posted October 3, 2018 4 Link to comment Share on other sites More sharing options...
PeteF Posted October 3, 2018 Author Share Posted October 3, 2018 Thanks, viewing this on an iPad with a shattered screen, it would probably have been more obvious on a better screen! 2 Link to comment Share on other sites More sharing options...
PeteF Posted October 3, 2018 Author Share Posted October 3, 2018 An old 1/48 scale Monogram Spitfire vs the tail of this kit. 4 Link to comment Share on other sites More sharing options...
PeteF Posted October 3, 2018 Author Share Posted October 3, 2018 Sprucing up and adding some access panels by printing them out, spray mounting them to the back of aluminum tape, gently punching them from the back and sticking them on. 7 Link to comment Share on other sites More sharing options...
Wingco57 Posted October 4, 2018 Share Posted October 4, 2018 What a clever idea. Aluminium tape has many uses. Also very handy doing canopy frames. 2 Link to comment Share on other sites More sharing options...
PeteF Posted October 4, 2018 Author Share Posted October 4, 2018 8 hours ago, Wingco57 said: What a clever idea. Aluminium tape has many uses. Also very handy doing canopy frames. Thanks, the only problem is the Vallejo primer and paint don’t adhere well at all so the paint easily lifts from these parts and they could never be touched with masking tape, 3 Link to comment Share on other sites More sharing options...
DocRob Posted October 4, 2018 Share Posted October 4, 2018 1 hour ago, PeteF said: Thanks, the only problem is the Vallejo primer and paint don’t adhere well at all so the paint easily lifts from these parts and they could never be touched with masking tape, Cool idea with the aluminum tape, I will store that on my 'in brain hard drive' After playing around with different acrylic based primers, I went back to my tustworthy Tamiya rattle can pimer, especially while using different materials like PE-metal and resin with the plastic. Live is to short to stay in constant fear of ruining a paintjob, because you peeled everything off with some piece of masking tape. I don't use that formula for paints, but for a primer my saying is if it stinks terrible it's the right stuff . Cheers Rob 6 Link to comment Share on other sites More sharing options...
PeteF Posted October 4, 2018 Author Share Posted October 4, 2018 Weathered the nacelles. Found many pics of oil pouring out of the cowling at that center seam. I believe in "additive" weathering. From my experiences with an oily plane, the dirt, grime, grease and oil is always stuck onto the plane. I have seen the trend towards "under" shading but I thought I'd experiment with pigments...it was easier to get a really grimy plane quickly than restrain it to the level I wanted so I had to do some over-painting to tone it down. I used gloss varnish over the oil to make that shiny. I also found that stippling a damp brush with pigment on it did a nicer job of exhaust soot than airbrushing did. But there's still plenty of airbrushing here. 5 Link to comment Share on other sites More sharing options...
Bomber_County Posted October 4, 2018 Share Posted October 4, 2018 Absolutely stunning Pete, this turning into a masterclass...... 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now