BlrwestSiR Posted March 29, 2019 Posted March 29, 2019 On 3/26/2019 at 7:54 PM, Clunkmeister said: Carl, I have a Tamiya Spitty in my stash, so I'll check. Actually, I have one of each of the three versions, so hopefully I'll be good for three of the four engines. I'll let you know, sir. Expand Sounds good Ernie. I have 8 sets here so enough for both of us. 3
Administrators Clunkmeister Posted March 29, 2019 Author Administrators Posted March 29, 2019 Well, a quick look found nothing really even close to being suitable. A pill bottle was to wide, so,.... let’s cast a cylinder in a pill bottle, use Pam to keep it from sticking (het, it works with my pancakes and vomlets, then get out the Drexel and start carving 3
Administrators Clunkmeister Posted March 29, 2019 Author Administrators Posted March 29, 2019 Well, I certainly ain’t Paul Fisher, but it came out in one piece. 5
Administrators Clunkmeister Posted March 29, 2019 Author Administrators Posted March 29, 2019 Let it harden overnight, then we’l see If we can carve it to look like this 5
Administrators Clunkmeister Posted March 29, 2019 Author Administrators Posted March 29, 2019 Might be a touch wide, but we’ll slim it down a bit. 3
harv Posted March 29, 2019 Posted March 29, 2019 On 3/29/2019 at 2:22 AM, Clunkmeister said: Well, I certainly ain’t Paul Fisher, but it came out in one piece. Expand .........harv 3
Administrators Clunkmeister Posted March 29, 2019 Author Administrators Posted March 29, 2019 On 3/29/2019 at 2:26 AM, harv said: .........harv Expand Yea yeah yeah, go ahead and laugh there, maestro. I’ll chuck it in my drill and turn it into a decent radome. 4
harv Posted March 29, 2019 Posted March 29, 2019 I know you will buddy. And it will come out great !.........(ha, Paul fisher ,ha).....harv 4
FME erk Posted March 29, 2019 Posted March 29, 2019 Innovation is what modelling is all about . . . great effort and I'm sure it will end up looking as its supposed to do In progress 5
Administrators Clunkmeister Posted March 30, 2019 Author Administrators Posted March 30, 2019 It’s got more holes and divots in it than a Trumpeter kit 5
Administrators Clunkmeister Posted March 30, 2019 Author Administrators Posted March 30, 2019 Fargging eyesore! Those lousy cork-soakers! Quote from “Johnny Dangerously” 4
Administrators Clunkmeister Posted March 31, 2019 Author Administrators Posted March 31, 2019 Well, a bit more information searching finds that all postwar RCAF Lancs used block tread tires, not the wartime smoothies as the kit contains. And there’s a scoop on the starboard side of the fuselage for cooling air. I expect for the electronics amidships... no real issue there, I’ll carve one of those, but the wheels might be an issue.. Rear observer windows are not flat as I thought, but domed out. Hmmm 4
Wumm Posted March 31, 2019 Posted March 31, 2019 On 3/29/2019 at 2:20 AM, Clunkmeister said: Well, a quick look found nothing really even close to being suitable. A pill bottle was to wide, so,.... let’s cast a cylinder in a pill bottle, use Pam to keep it from sticking (het, it works with my pancakes and vomlets, then get out the Drexel and start carving Expand You will probably find it doesn't stick so much, if you put it inside rubber first. And who's this Pam? 3
Administrators Clunkmeister Posted March 31, 2019 Author Administrators Posted March 31, 2019 On 3/31/2019 at 2:22 AM, Wumm said: You will probably find it doesn't stick so much, if you put it inside rubber first. And who's this Pam? Expand She don’t stick around to much... you don’t know Pam was down there clinging to the earth so you don’t fall off? 3
Martinnfb Posted March 31, 2019 Posted March 31, 2019 On 3/31/2019 at 2:22 AM, Wumm said: You will probably find it doesn't stick so much, if you put it inside rubber first. And who's this Pam? Expand 4
Administrators Clunkmeister Posted March 31, 2019 Author Administrators Posted March 31, 2019 That’s her!!! 4
Wumm Posted March 31, 2019 Posted March 31, 2019 There's so many lines I could use here... Must... Resist... Just remember to use your mask when you Dremel Meester Meister. 5
Administrators Clunkmeister Posted March 31, 2019 Author Administrators Posted March 31, 2019 On 3/31/2019 at 3:00 AM, Wumm said: There's so many lines I could use here... Must... Resist... Just remember to use your mask when you Dremel Meester Meister. Expand You ain’t gonna take the bait, hmmmmm? 3
Bomber_County Posted March 31, 2019 Posted March 31, 2019 I think the moniker of NSFW has to be rolled out looking good Ernie 4
Jeff Posted April 1, 2019 Posted April 1, 2019 Ernie, I'm still trying to dig up info for you, but some of it seems fairly elusive.................. but in case you want to change course, here is a thought... 4
Administrators Clunkmeister Posted April 1, 2019 Author Administrators Posted April 1, 2019 Jeff, that'd be great for unclogging the ice floes at the Mouth of the Churchill and Mackenzie Rivers. 2
Administrators Clunkmeister Posted April 1, 2019 Author Administrators Posted April 1, 2019 On 4/1/2019 at 8:34 PM, GusMac said: WTF? Surely that's a 'what if' isn't it? Expand It'd certainly get the sheep moving in the right direction. 4
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now