HubertB Posted February 23, 2022 Posted February 23, 2022 Got a message this morning from Jiri, apologising for the cock-up and refunding the overpaid amount. All is good for the new Fly 1/32 Sabb J-29 Hubert 2 1
Artful69 Posted February 23, 2022 Posted February 23, 2022 On 2/23/2022 at 5:28 AM, BlrwestSiR said: The important question is will they include decals for Starscream from Transformers? Yes - This MUST happen!!!!! Rog 4
BlrwestSiR Posted May 11, 2022 Posted May 11, 2022 The Shizuoka show finally happened this year. ZM showed off the Hs-129 with the big stonkin' cannon. No release date yet but at least it's coming. They also had a mock up of some little known plane called an FW190. Haven't heard of that type before. The F-4G in 1/48 looks to be ready soon. For other news, check out Hobby Dengeki. https://hobby.dengeki.com/hobby-shizuoka/ 4 4
GusMac Posted May 11, 2022 Posted May 11, 2022 Thanks for that Carl. That's a Henschel shaped hole in my wallet coming! 😄 5 1
BlrwestSiR Posted May 11, 2022 Posted May 11, 2022 6 minutes ago, GusMac said: Thanks for that Carl. That's a Henschel shaped hole in my wallet coming! 😄 It'll be one for me too. I've been waiting for this variant since it was announced. 4
biggtim Posted May 12, 2022 Posted May 12, 2022 I am usually not one for building more than one model of a given aircraft type (except P-38s), but I have to admit that ZM 190 might get me to do it. The last one I built was the OLD Hase kit, and it sucks. Pretty sure the ZM one won't. Of course, that depends on whether I ever build another model at all.... 😐 4
Peterpools Posted May 12, 2022 Posted May 12, 2022 No question I'm in for the 190 and for a 109 as well. Just might have to find a job at this rate Keep 'em comin Peter 1 4
BlrwestSiR Posted May 14, 2022 Posted May 14, 2022 5 minutes ago, Bomber_County said: May just be tempted to do another ZM F4……… The G is probably my favourite version of the F-4. I've got just about every conversion released for the Tamiya 1/32 kit in the stash and even tried doing my own at one point. I'll still build one in 1/42 but the ZM is a good reason to go smaller. Carl 5
belugawhaleman Posted May 14, 2022 Posted May 14, 2022 The HS-129 looks cool. I've never tried one of the ZM kits before. 5
Bomber_County Posted May 14, 2022 Posted May 14, 2022 IMHO - ZM are amazing kits, engineering as good as the best Tamiya…….they do have detractors but doesn’t all manufacturers. I’d recommend them…… 5 1
Martinnfb Posted May 17, 2022 Posted May 17, 2022 http://www.printscale.org/product_1089.html?fbclid=IwAR1T2nOUAs_Mf3zd5s3uEpj-fiPKKWR1ZDH5sT_WLvikEqeqPX1tgbBl9NA 3 1
BlrwestSiR Posted May 22, 2022 Posted May 22, 2022 How about a model of a model kit? Tori Factory is coming out with a 1/12 model of a 1/24 car kit. https://www.1999.co.jp/eng/m/10887090 It even comes with a 1/12 masking tape and dispenser. 1 2 3
Peterpools Posted May 23, 2022 Posted May 23, 2022 Thanks Martin for the heads up ... I'm starting to take a liking to these types of kits and building a few a year would be a boat load of fun. Keep 'em comin Peter 1
DocRob Posted May 25, 2022 Posted May 25, 2022 Lately we've seen more and more 16 scale kits being build here. A lot of them are produced by Takom, whose Chinese (Japanese) Tankette I built lately. It was an enjoyable experience and I just found on Scalemates, that two more 16 scale kits are supposed to surface this year. The Jeep is made by Takom and the video shows it with engine and figure, nice touch. The other kit is from Andy's Hobby Headquarters and it's still in pre production status. It's a M4A3E8 Sherman in 1/16. Cheers Rob 6 1
belugawhaleman Posted May 25, 2022 Posted May 25, 2022 2 hours ago, DocRob said: Lately we've seen more and more 16 scale kits being build here. A lot of them are produced by Takom, whose Chinese (Japanese) Tankette I built lately. It was an enjoyable experience and I just found on Scalemates, that two more 16 scale kits are supposed to surface this year. The Jeep is made by Takom and the video shows it with engine and figure, nice touch. The other kit is from Andy's Hobby Headquarters and it's still in pre production status. It's a M4A3E8 Sherman in 1/16. Cheers Rob Eagerly anticipating both! I'm surprised a big-scale Sherman hasn't come out earlier. (Besides Tamiya's RC version). 4
belugawhaleman Posted May 25, 2022 Posted May 25, 2022 1 hour ago, Martinnfb said: Nice! I've got a few of their armored car kits. They produce nice kits. 2
DocRob Posted May 25, 2022 Posted May 25, 2022 6 hours ago, belugawhaleman said: Eagerly anticipating both! I'm surprised a big-scale Sherman hasn't come out earlier. (Besides Tamiya's RC version). Oh, there is the 1/6 version from Dragon. M4A3 (105) Howitzer Tank, Dragon 75046 (2013) (scalemates.com) Cheers Rob 3
belugawhaleman Posted May 25, 2022 Posted May 25, 2022 1 hour ago, DocRob said: Oh, there is the 1/6 version from Dragon. M4A3 (105) Howitzer Tank, Dragon 75046 (2013) (scalemates.com) Cheers Rob Oh, yes that's right. I forgot about that one! 1
Martinnfb Posted May 27, 2022 Posted May 27, 2022 This new Olympic discipline called the Turret Throw is becoming legendary 3 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now