Jump to content
Playing in the Sandbox Group Build Sept 1, 2024 - Jn 1, 2025

What is on your bench right now ? Share a picture :)


Martinnfb

Recommended Posts

7 hours ago, GazzaS said:

Aye Caramba!  That's a lot of paints, Carl.

That's just the Tamiya, Gunze and AK. I have the Vallejo paints to my boys. Less chance if spills I figure. 

3 hours ago, Bomber_County said:

And a small flight of Corsair’s.........

Well, the Corsair is my favourite prop plane...

2 hours ago, Jeff said:

And a gaggle of Spitfires too.....

...followed by the Spitfire.

  • Like 4
Link to comment
Share on other sites

One of the toughest aspects of painting camouflage is trying to get it as close to the historical version as possible.

In this shot, I made my best so far attempt at the scalloped leading edges common to Messerschmitt wings:

odSjt9.jpg

And in this second shot you can see what the mottle looks like when distressed with wet 8000 grit micromesh:

rgZ6M1.jpg

 

  • Like 6
Link to comment
Share on other sites

Guest Dekenba
1 hour ago, GazzaS said:

One of the toughest aspects of painting camouflage is trying to get it as close to the historical version as possible.

In this shot, I made my best so far attempt at the scalloped leading edges common to Messerschmitt wings:

odSjt9.jpg

And in this second shot you can see what the mottle looks like when distressed with wet 8000 grit micromesh:

rgZ6M1.jpg

 

Those scalloped leading edges look pretty damned good - was that airbrushed?

Link to comment
Share on other sites

1 minute ago, Dekenba said:

Those scalloped leading edges look pretty damned good - was that airbrushed?

Thank you!  I made 80mm long masks with my Silhouette Portrait, then airbrushed em.  I'm hoping that by simple enlargement I can use them for 1/32 scale/

  • Like 6
Link to comment
Share on other sites

Well, I got furloughed, then that was rescinded, but in the meantime i got started on this one:

jSlvOLT.jpg

Kittyhawk F-86K. I have a bunch of other things going too, but this one is taking most of the bench right now. Markings are masked and painted.

  • Like 10
Link to comment
Share on other sites

11 hours ago, Winnie said:

Well, I got furloughed, then that was rescinded, but in the meantime i got started on this one:

jSlvOLT.jpg

Kittyhawk F-86K. I have a bunch of other things going too, but this one is taking most of the bench right now. Markings are masked and painted.

Well I see the problem, the rest of the airplane is missing. :)

 

  • Like 7
Link to comment
Share on other sites

Guest Dekenba
1 hour ago, Ryan said:

Well I see the problem, the rest of the airplane is missing. :)

 

Cuts to the Norwegian defence budget were particularly severe that year.

Link to comment
Share on other sites

Fiddling, fettling, fussing...

IMG_20200502_131229.thumb.jpg.0f06f93ca147304682d23f48c854f027.jpg

Floor pan of the Zoukei Mura Ki-45 cockpit. Attempting different techniques to get the look I think I'm finally happy with.

  • Like 7
  • Thanks 1
Link to comment
Share on other sites

Work continues....  I feel like there is a finish coming soon.

RxA3U0.jpg

Some figures....  if some company that makes figures creates face decals that work, they'll sell like hotcakes. (you heard it here, first)

LqGLKm.jpg

ApfM8j.jpg

 

Happy modelling!

  • Like 9
  • Thanks 1
Link to comment
Share on other sites

Not much progress on the P11c right now, but made some changes to my Hobbyzone modules.

One issue I have with the tools' module is that it has a lot of small diameter holes, which are only useful for small diameter tools like files or fine brushes.

As I had some scrap thin plywood, I decided to modify two if my three tool-modules. I built boxes with 16, 13 and 10 mm dia holes, and substituted these boxes with the original horizontal multi-holes plate. I glued them inclined. The plywood is not the best, as it splits on drilling, but I used what I had, and only I know it could look cleaner, as you don't see much difference when it's loaded.

On the left of the pic are the two new modfied modules, and on the right the original one (which has still some use for the files and brushes).

i-7DHBndj-L.jpg 

A lot happier now with the bench tidying ;)

Hubert

 

  • Like 9
Link to comment
Share on other sites

I got evicted from my hobby room, it’s now my wife’s at home office for the time being. So I moved my work area down to the garage, which is OK, because I was going to be using lacquer paints for several builds..

1270F920-1CBA-4335-9FAE-A845FC4C047D.jpeg

  • Like 10
Link to comment
Share on other sites

On 5/3/2020 at 5:06 AM, HubertB said:

Not much progress on the P11c right now, but made some changes to my Hobbyzone modules.

One issue I have with the tools' module is that it has a lot of small diameter holes, which are only useful for small diameter tools like files or fine brushes.

As I had some scrap thin plywood, I decided to modify two if my three tool-modules. I built boxes with 16, 13 and 10 mm dia holes, and substituted these boxes with the original horizontal multi-holes plate. I glued them inclined. The plywood is not the best, as it splits on drilling, but I used what I had, and only I know it could look cleaner, as you don't see much difference when it's loaded.

On the left of the pic are the two new modfied modules, and on the right the original one (which has still some use for the files and brushes).

i-7DHBndj-L.jpg 

A lot happier now with the bench tidying ;)

Hubert

 

Hubert I have the one that your Flexifile is on and I find it about useless to hold smaller brushes. It seems that the bore at the bottom of the unit is too shallow to allow the brush not to tip or fall out.

  • Like 5
Link to comment
Share on other sites

2 hours ago, Ryan said:

Hubert I have the one that your Flexifile is on and I find it about useless to hold smaller brushes. It seems that the bore at the bottom of the unit is too shallow to allow the brush not to tip or fall out.

Agreed. It seems we all have some issues with the design of some of these modules. My mod is simple enough and requires a couple hours of work for someone with basic DYI skills. If others are interested, I can publish the template I drew, with dimensions. 
 

Hubert

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...