Jump to content

Recommended Posts

Posted
39 minutes ago, Peterpools said:

Carl

HUGE comes closer but is still not right. Gigantic is closer. Where are you going to display the B-24?

Keep 'em comin

Peter

 

I'm not sure yet Peter. Sue says not in the living room. I think I'm still going with my plan to empty a shelf and replace it with a hopefully big enough display case.

2 hours ago, GusMac said:

That's a big beastie!

Looks really good in that paint job Carl.

Thanks Gus! Definitely no hiding it. 

  • Like 3
Posted

Time for an update. I started fitting the cowl flaps to the nacelles. The railing edge looks a bit thick so I shaved it down a bit to make it thinner. 

Before:

PXL_20220604_174011626.thumb.jpg.6fecd5e09e4f8322c9d94fc040ffc83e.jpg

After:

PXL_20220604_173957227.thumb.jpg.55a4763c4601ac5e5f8993079c58d8c3.jpg

Then I masked off the lower side as needed.

PXL_20220604_173327012.thumb.jpg.7a27cb090145f78e52627f85e9c3f525.jpg

I started the camo with the Extra Dark Sea Grey.

PXL_20220604_175320253.thumb.jpg.95984ee7ddc1ab457e0b5b0401610852.jpg

  • Like 8
  • Thanks 1
Posted (edited)

From there, I then masked off the fuselage so I could align the camo scheme between the wing and fuselage.

PXL_20220604_181723910.thumb.jpg.dbabf0a20297c30e406d25cdc54e9c95.jpg

I did a quick outline so that I made the camo aligned.

PXL_20220604_181955547.thumb.jpg.d88721eed7a3ca0b5b8cbbcd7e75a8ab.jpg

Then I took the wing off and continued on the camo. 

PXL_20220604_182725165_MP.thumb.jpg.5a28c43cf7a33d1a61d3e7b08104f15e.jpg

PXL_20220604_183952061.thumb.jpg.f9ad9dbcc3e517e16f6f9c98d72e96e5.jpg

Here's the finished wing dry fit on the fuselage. Looks to have worked out. 

PXL_20220604_184012294.thumb.jpg.fcf887b2caf26543dfefd1219266952b.jpg

The other wing is much easier so that will be next. 

 

Edited by BlrwestSiR
Fix pic.
  • Like 8
  • Thanks 1
Posted

Carl

Amazing progress. Glad you thinned out the cowl flaps - they now look so much better.

Nice work on the wing cammo and matching the fuselage and wing pattern - looks perfect.

Keep 'em comin

Peter

i

  • Like 2
  • Thanks 1
Posted

Wing camo is all done now. I masked off and painted the de-icer boots. 

PXL_20220605_035518640.thumb.jpg.b911c55b1df139787fc716292f6e82b1.jpg

Here they are l test fit in place. 

PXL_20220605_042658588.thumb.jpg.bb3f190c54e2d71644f6d98803f8c12c.jpg

Here's the wing/fuselage join. No glue yet but the fit is decent. I will most likely leave it alone. 

PXL_20220605_042716959.thumb.jpg.9b5d57901a9ed45489b73667da373df1.jpg

  • Like 10
Posted

It's very helpful, that you can spray the wings apart from the fuselage. Your camo looks great. Do you buy your paints in gallons Carl?

Cheers Rob

  • Like 4
  • Thanks 1
  • Haha 2
Posted

Carl

Looking so good and mighty impressive. The wing/fuselage seam looks fine and leaving it as is with removable wings if space becomes an issue and if so the wings can be removed for storage.

Keep 'em comin

Peter

  • Like 3
  • Thanks 1
Posted
5 hours ago, GazzaS said:

Superb!

Thanks Gary! 

2 hours ago, DocRob said:

It's very helpful, that you can spray the wings apart from the fuselage. Your camo looks great. Do you buy your paints in gallons Carl?

Cheers Rob

It's definitely helped being able to paint the wings separately. 

Would you believe I've only used just 1 bottle of white, 1/2 bottle of Extra Dark Sea Grey and 1/2 bottle of the Slate grey? All of it has been straight from the bottle without thinning. My LHS had complained that they don't sell much Mission Models paint as it goes a long way. I believe them now after painting this model. 

41 minutes ago, Peterpools said:

Carl

Looking so good and mighty impressive. The wing/fuselage seam looks fine and leaving it as is with removable wings if space becomes an issue and if so the wings can be removed for storage.

Keep 'em comin

Peter

Thanks Peter, I may just leave them removable until I can find a permanent place to display it. 

  • Like 6
Posted

Not at all a criticism of your work, Carl, as it’s really nice and impressive, but the camouflage separation emphasizes the funky wing root profile of the kit :blink: …

Hubert

  • Like 3
  • Thanks 1
Posted

Carl, I may be wrong, but it seems that HB molded some kind of winglets at the edge of the engine cowling flaps. Hard to say from the picture, that middle transition should be smooth.

consolidated-b-24-liberator-large-11.jpg

  • Like 3
  • Thanks 1
Posted

Martin, it sort of does look like a winglet doesn't it? To me, I think they tried to mould that bit with the cowl flaps in the open position rather than closed which is what they supplied. Just one more little (or not) mistake. The engineering of the kit really makes me suspect it was to be offered assembled. 

  • Like 3
Posted
On 6/5/2022 at 9:03 AM, HubertB said:

Not at all a criticism of your work, Carl, as it’s really nice and impressive, but the camouflage separation emphasizes the funky wing root profile of the kit :blink: …

Hubert

The wing shape is off but the work to fix it is beyond what I wanted out of the build. 

Iain on LSP is working on a fix but it's quite involved and I'm not up to it. 

 

  • Like 3
  • Thanks 1
Posted

The improvement of the cowl-flaps really pays off and the camo scheme turns out very nice.

With this size it’s essential that you can paint the wings and fuselage separately.

Made the same experience when painting my HK Lancaster. 

  • Like 4
  • Thanks 1
  • 3 weeks later...
Posted
48 minutes ago, Martinnfb said:

Watching closely :)

0_CATERS_BABY_SLOTH_RESCUED_01.jpg

Don't look too closely or you'll see a lack of progress. I'm stuck on the props as I'm not keen to work on them for some reason. Need to get back to it and get them done...oh look shiny yellow thing. 

PXL_20220623_202513793.thumb.jpg.14329f5f9f037fc062fb65fb4d881a97.jpg

  • Like 4
  • Haha 1
  • Administrators
Posted

Carl, I’ve been following this here and there and I like it, a lot. I can’t get past that wing/fuselage joint, and like Hubert said, the Atlantic pattern camo sure accentuates it. But, if ya want an RCAF North Atlantic patrol bomber, this is the only scheme they came in, so onward and upward.  
I’ve been watching Iain’s fix on his, and I may attempt something similar, sort of following his lead. This is the #1 reason I haven’t built one yet, since I’ve been paying close attention to his struggles.

But yours is looking oh so flawless so far, and what a recovery from that extra interior space problem you gave the bomb aimer… 🤣

  • Like 3
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...