TJTX Posted October 5, 2020 Posted October 5, 2020 Been a little busy lately, but I managed to pull two builds back out to start working with again. Got my Wingnut Albatross and Tamiya Mustang out. Hoping to maybe get in an airbrush session tomorrow. Been almost 5 months since I've touched plastic. 7
recon Posted October 5, 2020 Posted October 5, 2020 Working on a RF-4C. This is an adventure, hope to post pics when I am done. Mike 4
BlrwestSiR Posted October 6, 2020 Posted October 6, 2020 Well, it worked. The big hurdle with the Fly kit. 8
DocRob Posted October 6, 2020 Posted October 6, 2020 On 10/6/2020 at 3:31 PM, BlrwestSiR said: Well, it worked. Expand Nice, always a big step and some Fly fuselages are not the easiest to close. Cheers Rob 3 1
TJTX Posted October 7, 2020 Posted October 7, 2020 I'm not lying, there is actually plastic on the bench! Way way way slower build pace than my old life but any progress makes me happy! 8 1
BlrwestSiR Posted October 7, 2020 Posted October 7, 2020 Edward helping me out with the Coldbuster. 7
Jeff Posted October 8, 2020 Posted October 8, 2020 On 10/7/2020 at 9:35 PM, BlrwestSiR said: Edward helping me out with the Coldbuster. Expand Looks like he is handling the 'technical' end of things............ do I see Engineer in the future?? 3 1
BlrwestSiR Posted October 8, 2020 Posted October 8, 2020 On 10/8/2020 at 2:00 PM, Jeff said: Looks like he is handling the 'technical' end of things............ do I see Engineer in the future?? Expand Possibly. He's fairly capable with tools considering he's only 7. He's not bad in the kitchen either. Just needs a bit more patience. 6
BlrwestSiR Posted October 11, 2020 Posted October 11, 2020 Happy Canadian Thanksgiving folks! As a result, no bench time today as I was working on this: Carl 6
Bomber_County Posted October 12, 2020 Posted October 12, 2020 To all the Canadians, Happy Thanksgiving guys......... 4 2
Jeff Posted October 12, 2020 Posted October 12, 2020 On 10/11/2020 at 9:20 PM, BlrwestSiR said: Happy Canadian Thanksgiving folks! As a result, no bench time today as I was working on this: Carl Expand OH................ Carl............. you kill me ... that looks fabulous !!!! 5 1
BlrwestSiR Posted October 14, 2020 Posted October 14, 2020 What is with Hawker and their tubular frame cockpits? Didn't they realize just how hard they were making it for us modelers? 5 2
Bill_S Posted October 14, 2020 Posted October 14, 2020 On 10/14/2020 at 3:34 AM, BlrwestSiR said: What is with Hawker and their tubular frame cockpits? Didn't they realize just how hard they were making it for us modelers? Expand Carl, that looks beefy compared to my MDC resin Hurricane cockpit! 4 1
BlrwestSiR Posted October 14, 2020 Posted October 14, 2020 On 10/14/2020 at 12:54 PM, Bill_S said: Carl, that looks beefy compared to my MDC resin Hurricane cockpit! Expand Bill, the frames were broken in a couple places and there was a lot of weird lumps and flash along most of them. I decided to chance it and glued the breaks and clean things up before removing the pour stubs and it worked out. 4 1 1
HubertB Posted October 16, 2020 Posted October 16, 2020 Rien, zero, zilch, nada ... But then it means I have completed the move to the new house and I have finished resetting the workbench ! Time to reintroduce sme clutter, methink Hubert 9
Jackster Posted October 16, 2020 Posted October 16, 2020 What a fantastic setup Hubert! What's going to be the first model to hit the mat? Cheers Kev 5
Bomber_County Posted October 16, 2020 Posted October 16, 2020 It’s to clean and organised to mess it up........ 4
HubertB Posted October 16, 2020 Posted October 16, 2020 Resuming my IBG PZL P-11 in 1934 Paris Airshow livery is #1 on the list. Then there is Fisher’s Gutless, or maybe Micro-mir Miles Magister ... So nice I got a second one before starting the first Hubert 6
Jeff Posted October 16, 2020 Posted October 16, 2020 On 10/16/2020 at 6:16 AM, HubertB said: Rien, zero, zilch, nada ... But then it means I have completed the move to the new house and I have finished resetting the workbench ! Time to reintroduce sme clutter, methink Hubert Expand I hope you don't mind, Old Buddy, but I saved a pic of your bench for inspiration for my set up that I hope to get right this time, Cathy and I are going to do the same thing, and I get 1/2 a room to do as I see fit, so I am looking for others' ideas on their set ups.... I really like they way you organized this..... great stuff, thanks for showing us this.... 3 1
HubertB Posted October 16, 2020 Posted October 16, 2020 On 10/16/2020 at 2:13 PM, Jeff said: I hope you don't mind, Old Buddy, but I saved a pic of your bench for inspiration for my set up that I hope to get right this time, Cathy and I are going to do the same thing, and I get 1/2 a room to do as I see fit, so I am looking for others' ideas on their set ups.... I really like they way you organized this..... great stuff, thanks for showing us this.... Expand No problem at all . Glad to be an inspiration for something, if not for completed models Hubert 7
Jeff Posted October 17, 2020 Posted October 17, 2020 On 10/16/2020 at 5:15 PM, HubertB said: No problem at all . Glad to be an inspiration for something, if not for completed models Hubert Expand Thanks, I think the desk I'm going to hopefully use, is wide enough to get the same storage box set up as you have.....or at least some of those storage kits.... your organization is great 3
GazzaS Posted October 18, 2020 Posted October 18, 2020 A bit of a bench upgrade for me. I got a new, rolling chair. and a small wheeled cabinet which will perform a couple tasks... for instance, the capacious bottom drawer will become my sprue organizer once I decide on how to fit separators innit. I had been using a kitchen chair and a short stool to hold the model box. 6
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now